Structural Engineering and Mechanics

  • 제38권5호
  • /
  • Pages.633-649
  • /
  • 2011
  • /
  • 1225-4568(pISSN)
  • /
  • 1598-6217(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Some characteristics of an interior explosion within a room without venting

  • Feldgun, V.R. (National Building Research Institute, Technion-IIT) ;
  • Karinski, Y.S. (National Building Research Institute, Technion-IIT) ;
  • Yankelevsky, D.Z. (National Building Research Institute, Technion-IIT)
  • 투고 : 2010.08.10
  • 심사 : 2011.02.22
  • 발행 : 2011.06.10
⟨ 이전 논문 다음 논문 ⟩

초록

The paper presents a study aimed at understanding some characteristics of an interior explosion within a room with limited or no venting. The explosion may occur in ammunition storage or result from a terrorist action or from a warhead that had penetrated into this room. The study includes numerical simulations of the problem and analytical derivations. Different types of analysis (1-D, 2-D and 3-D analysis) were performed for a room with rigid walls and the results were analyzed. For the 3D problem the effect of the charge size and its location within the room was investigated and a new insight regarding the pressure distribution on the interior wall as function of these parameters has been gained. The numerical analyses were carried out using the Eulerian multi-material approach. Further, an approximate analytical formula to predict the residual internal pressure was developed. The formula is based on the conservation law of total energy and its implementation yields very good agreement with the results obtained numerically using the complete statement of the problem for a wide range of explosive weights and room sizes that is expressed through a non-dimensional parameter. This new formula is superior to existing literature recommendations and compares considerably better with the above numerical results.

키워드

참고문헌

  1. A718300 (1974), "Engineering design handbook. explosions in air. part one", Army Materiel Command Alexandria, VA.
  2. AASTP-1 (2006), "Manual of NATO safety principles for the storage of military ammunition and explosives", NATO International Staff - Defense Investment Division.
  3. Aleksandrov, L.N., Ivanov, A.G., Mineev, V.N., Tsypkin, V.I. and Shitov, A.T. (1982), "Plastic deformation of spherical steel shells under internal blast loading", J. Appl. Mech. Tech. Phys., 23(6), 831-835.
  4. Aleksandrov, L.N., Ivanov, A.G., Mineev, V.N., Tsypkin, V.I. and Shitov, A.T. (1982), "Plastic deformation of spherical steel shells under internal blast loading", J. Appl. Mech. Tech. Phys., 23(6), 831-835.
  5. Baker, W.E., Cox, P.A., Westine, P.S., Kulesz, J.J. and Strehlow, R.A. (1983), Explosion Hazards and Evaluation, Elsevier, Amsterdam.
  6. Bangash, M.Y.H. (1993), Impact and Explosion. Analysis and Design, Spon Press, Blackwell Scientific Publications, Oxford.
  7. Bangash, M.Y.H. and Bangash, T. (2006), Explosion-Resistant Buildings, Springer.
  8. Ben-Dor, G., Igra, O. and Elperin, T. (2000), Handbook of Shock Waves, Academic Press, Elsevier.
  9. Chock, J.M.K. and Kapania, R.K. (2001), "Review of two methods for calculating explosive Air blast", Shock Vib. Dig., 33(2), 91-102. https://doi.org/10.1177/058310240103300201
  10. Corneliu, B. (2004), "Evaluation and rehabilitation of a building affected by a gas explosion", Prog. Sturct. Eng. Mat., 6(3), 137-146. https://doi.org/10.1002/pse.172
  11. Dorn, M., Nash, M., Anderson, G., Jones, N. and Brebbia, C.A. (1996), "The numerical prediction of the collapse of a complex brick building due to an internal explosion", ASME Publications- PVP, 351, 359-364.
  12. Duffey, T.A. and Romero, C. (2003), "Strain growth in spherical explosive chambers subjected to internal blast loading", Int. J. Impact Eng., 28(9), 967-983. https://doi.org/10.1016/S0734-743X(02)00169-0
  13. Eamon, C.D. (2007), "Reliability of concrete masonry unit walls subjected to explosive loads", J. Struct. Eng., 133(7), 935-944. https://doi.org/10.1061/(ASCE)0733-9445(2007)133:7(935)
  14. Gregory, F.H. (1976), "Analysis of the loading and response of a suppressive shield when subjected to an internal explosion", Minutes of the Seventeenth Explosive Safety Seminar, Denver, Colorado.
  15. Griffiths, H., Pugsley, A. and Saunders, O. (1968), "Report of the Inquiry into the Collapse of Flats at Ronan Point, Canning Town", Her Majesty's Stationery Office, London.
  16. Igra, O., Hu, G., Falcovitz, J. and Heilig, W. (2003), "Blast wave reflection from wedges", J. Fluid. Eng., 125(3), 510-519. https://doi.org/10.1115/1.1567310
  17. Keenan, W.A. and Tancreto, J.E. (1974), "Blast environment from fully and partially vented explosions in cubicles", Tech. Rep. 51-027, NCEL, Port-Hueneme, CA.
  18. Kinney, G.F. (1962), Explosive Shocks in Air, The Macmillan Co., New York.
  19. Kivity, Y. (1992), "The reflected impulse on a curved wall produced by a spherical explosion in air", 25th Explosives Safety Seminar, Anaheim, CA.
  20. Liang, S.M., Wang, J.S. and Chen, H. (2002), "Numerical study of spherical blast-wave propagation and reflection", Shock Waves, 12(1), 59-68. https://doi.org/10.1007/s00193-002-0142-5
  21. Luccioni, B.M., Ambrosini, R.D. and Danesi, R.F. (2005), "Failure of a reinforced concrete building under blast loads", WIT Trans. Eng. Sci., 49, 336-345.
  22. Marchenko, A.I. and Romanov, G.S. (1984), "Numerical simulation of processes in a spherical combustion chamber", J. Eng. Phys. Thermophys, 47(4), 1230-1234. https://doi.org/10.1007/BF00869924
  23. Michael, M. and Swisdak, Jr. (1975), "Explosion effects in air", Final Report, A445810.
  24. O'Daniel, J.L. and Krauthammer, T. (1997), "Assessment of numerical simulation capabilities for mediumstructure interaction systems under explosive loads", Comput. Struct., 63(5), 875-887. https://doi.org/10.1016/S0045-7949(96)00409-9
  25. Podlubnyi, V.V. and Fonarev, A.S. (1974), "Reflection of a spherical blast wave from a planar surface", Fluid Dyn., 9(6), 921-926.
  26. Remennikov, A.M. and Rose, T.A. (2005), "Modeling blast loads on buildings in complex city geometries", Comput. Struct., 83(27), 2197-2205. https://doi.org/10.1016/j.compstruc.2005.04.003
  27. Shear, R.E. and Makino, R.C. (1967), "A non-linear shock wave reflection theory", Pentagon Report Number: 0549946.
  28. Smith, P.D. and Rose, T.A. (2006), "Blast wave propagation in city streets - an overview", Prog. Struct. Eng. Mater., 8, 6-28.
  29. Smith, P.D., Whalen, G.P., Feng, L.J. and Rose, T.A. (2001), "Blast loading on buildings from explosions in city streets", Proc. Institut. Civil Eng. Struct. Build., 146(1), 47-55. https://doi.org/10.1680/stbu.2001.146.1.47
  30. TM-5-1500 (1990), "Structures to resist the effects of accidental explosions", Department of the Army, the NAVY and the Air Force, Washington, DC, USA.
  31. TM-5-855-1 (1986), "Fundamentals of protective design for conventional weapons", Department of Army, Washington, DC, USA.
  32. Tsypkin, V.A., Cheverikin, A.M., Ivanov, A.G., Novikov, S.A., Mineev, V.N. and Shitov, A.T. (1982), "Study of the Behavior of closed steel spherical shells with single-stage internal explosive loading", Strength Mater., 14(10), 1353-1359. https://doi.org/10.1007/BF00770134
  33. Vaidogas, E.R. (2003), "Pressure vessel explosions inside buildings: assessing damage using stochastic accident simulation", Struct. Eng. Int., 13(4), 249-253. https://doi.org/10.2749/101686603777964432
  34. Zhu, W., Xue, H., Zhou, G. and Schleyer, G.K. (1997), "Dynamic response of cylindrical explosive chambers to internal blast loading produced by a concentrated charge", Int. J. Impact Eng., 19(9-10), 831-845. https://doi.org/10.1016/S0734-743X(97)00022-5

피인용 문헌

  1. Simplification of fully confined blasts for structural response analysis vol.56, 2013, https://doi.org/10.1016/j.engstruct.2013.05.018
  2. On Blast Pressure Analysis Due to a Partially Confined Explosion: II. Numerical Studies vol.3, pp.1, 2012, https://doi.org/10.1260/2041-4196.3.1.61
  3. Application of Normalized Pressure Impulse Diagrams for Vented and Unvented Confined Blasts vol.140, pp.3, 2014, https://doi.org/10.1061/(ASCE)EM.1943-7889.0000680
  4. Prediction of the quasi-static pressure in confined and partially confined explosions and its application to blast response simulation of flexible structures vol.90, 2016, https://doi.org/10.1016/j.ijimpeng.2015.12.001
  5. The effect of an explosion in a tunnel on a neighboring buried structure vol.44, 2014, https://doi.org/10.1016/j.tust.2014.07.006
  6. Numerical Method for Predicting the Blast Wave in Partially Confined Chamber vol.2018, pp.1563-5147, 2018, https://doi.org/10.1155/2018/2530239
  7. Probabilistic assessment of airblast variability and fatality risk estimation for explosive blasts in confined building spaces vol.10, pp.3, 2019, https://doi.org/10.1177/2041419619849083
  8. Simple Method to Evaluate the Ballistic Properties for Gas Generant Compositions vol.57, pp.3, 2021, https://doi.org/10.1134/s0010508221030047