DOI QR코드

DOI QR Code

Crack-contact problem for an elastic layer with rigid stamps

  • Birinci, Ahmet (Department of Civil Engineering, Karadeniz Technical University)
  • Received : 2009.09.10
  • Accepted : 2010.10.13
  • Published : 2011.02.10

Abstract

The plane crack-contact problem for an infinite elastic layer with two symmetric rectangular rigid stamps on its upper and lower surfaces is considered. The elastic layer having an internal crack parallel to its surfaces is subjected to two concentrated loads p on its upper and lower surfaces trough the rigid rectangular stamps and a pair of uniform compressive stress $p_0$ along the crack surface. It is assumed that the contact between the elastic layer and the rigid stamps is frictionless and the effect of the gravity force is neglected. The problem is reduced to a system of singular integral equations in which the derivative of the crack surface displacement and the contact pressures are unknown functions. The system of singular integral equations is solved numerically by making use of an appropriate Gauss-Chebyshev integration formula. Numerical results for stress-intensity factor, critical load factor, $\mathcal{Q}_c$, causing initial closure of the crack tip, the crack surface displacements and the contact stress distribution are presented and shown graphically for various dimensionless quantities.

Keywords

References

  1. Albrect, P. and Lenwari, A. (2006), "Stress intensity factor for center-cracked plate with crack surface interference", Eng. Fract. Mech., 73(8), 1035-1045. https://doi.org/10.1016/j.engfracmech.2005.12.009
  2. Bakioglu, M. and Erdogan, F. (1977), "The crack-contact and the free-end problem for a strip under residual stress", J. Appl. Mech., ASME, 44, 41-46. https://doi.org/10.1115/1.3424011
  3. Beghini, M. and Bertini, L. (1996), "Effective stress intensity factor and contact stress for a partially closed Griffith crack in bending", Eng. Fract. Mech., 54(5), 667-678. https://doi.org/10.1016/0013-7944(95)00234-0
  4. Birinci, A. and Cakiroglu, F.L. (2003), "Partial closure of a crack located in an infinite elastic layer", Eur. J. Mech. A-Solid, 22, 583-590. https://doi.org/10.1016/S0997-7538(03)00053-6
  5. Birinci, A. and Erdol, R. (2004), "A layered composite containing a crack in its lower layer loaded by a rigid stamp", Eur. J. Mech. A-Solid, 23, 909-924. https://doi.org/10.1016/j.euromechsol.2004.05.008
  6. Chattopadhyay, L. (2005), "Analytical solution for an orthotropic elastic plate containing cracks", Int. J. Fracture, 134(3-4), 305-317. https://doi.org/10.1007/s10704-005-1721-0
  7. Chen, Y.Z. (1999), "A contact crack problem in an infinite plate", Int. J. Eng. Sci., 37, 621-630. https://doi.org/10.1016/S0020-7225(98)00086-X
  8. Delale, F. and Erdogan, F. (1988), "Interface crack in a nonhomogeneous elastic medium", Int. J. Eng. Sci., 26(6), 559-568. https://doi.org/10.1016/0020-7225(88)90054-7
  9. Dempsey, J.P. and Shekhtman, I.I. (1998), "Closure of a through crack in a plate under bending", Int. J. Solids Struct., 35(31-32), 4077-4089. https://doi.org/10.1016/S0020-7683(97)00302-8
  10. Erdogan, F. and Gupta, G.D. (1972), "On the numerical solutions of singular integral equations", Quart. Appl. Math., 30, 533-547.
  11. Erdogan, F. and Dag, S. (2001), "Crack and contact problems in functionally graded materials", Function. Grad.Mater. 2000, 114, 739-746.
  12. Gupta, G.D. and Erdogan, F. (1974), "The problem of edge cracks in an infinite strip", J. Appl. Mech., 41, 1001-1006. https://doi.org/10.1115/1.3423423
  13. Hwu, C. and Fan, C.W. (1998), "Solving the punch problems by analogy with the interface crack problems", Int. J. Solids Struct., 35(30), 3945-3960. https://doi.org/10.1016/S0020-7683(97)00210-2
  14. Kad oglu, S. and Erdogan, F. (1995), "Free edge problem for bonded orthotropic elastic layers", Fract. Mech., 25, 156-176.
  15. Kahya, V., Birinci, A., Ozsahin, T.S. and Erdol, R. (2006), Partial closure of a crack located in an anisotropic infinite elastic layer", Eur. J. Mech. A-Solid, 25(5), 819-833. https://doi.org/10.1016/j.euromechsol.2006.01.005
  16. Krenk, S. (1975), "A note on the use of the interpolation polynomial for solutions of singular integral equations", Quart. Appl. Math., 32, 479-485. https://doi.org/10.1090/qam/474919
  17. Lu, J.K. and Erdogan, F. (1998), "A crack problem with a broken line interface", Chinese Ann. Math. B., 19(2), 229-238.
  18. Matysiak, S.J. and Pauk, V.J. (1999), "On crack problem in an elastic ponderable layer", Int. J. Fract., 96, 371- 380.
  19. Matysiak, S.J. and Pauk, V.J. (2003), "Edge crack in an elastic layer resting on Winkler foundation", Eng. Fract. Mech., 70, 2353-2361. https://doi.org/10.1016/S0013-7944(03)00007-9
  20. Nied, H.F. and Erdogan, F. (1979), "A cracked beam or plate transversely loaded by a stamp", Int. J. Solids Struct., 15, 951-965. https://doi.org/10.1016/0020-7683(79)90024-6
  21. Ozturk, M. and Erdogan, F. (1996), "Axisymmetric crack problem in bonded materials with a graded interfacial region", Int. J. Solids Struct., 33(2), 193-219. https://doi.org/10.1016/0020-7683(95)00034-8
  22. Shats'kyi, I.P. and Makoviichuk, M.V. (2003), "Contact interaction of the crack edges in the case of bending of a plate with elastic support", Mater. Sci., 39(3), 371-376. https://doi.org/10.1023/B:MASC.0000010742.15838.44
  23. Wu, Z.X. (2006), "The shape of a surface crack in a plate based on a given stress intensity factor distribution", Int. J. Pres. Ves. Pip., 83(3), 168-180. https://doi.org/10.1016/j.ijpvp.2006.01.004

Cited by

  1. Contact problem for a stringer plate weakened by a periodic system of variable width slots vol.62, pp.6, 2011, https://doi.org/10.12989/sem.2017.62.6.719
  2. Numerical analysis of the receding contact problem of two bonded layers resting on an elastic half plane vol.72, pp.6, 2011, https://doi.org/10.12989/sem.2019.72.6.775