Structural Engineering and Mechanics

  • 제37권2호
  • /
  • Pages.131-147
  • /
  • 2011
  • /
  • 1225-4568(pISSN)
  • /
  • 1598-6217(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Application of joint time-frequency distribution for estimation of time-varying modal damping ratio

  • Bucher, H. (Department of Civil Engineering, COPPE/Federal University of Rio de Janeiro) ;
  • Magluta, C. (Department of Civil Engineering, COPPE/Federal University of Rio de Janeiro) ;
  • Mansur, W.J. (Department of Civil Engineering, COPPE/Federal University of Rio de Janeiro)
  • 투고 : 2009.03.04
  • 심사 : 2010.05.10
  • 발행 : 2011.01.25
⟨ 이전 논문 다음 논문 ⟩

초록

The logarithmic decrement method has been long used to estimate damping ratios in systems with only one modal component such as linear single degree of freedom (SDOF) mechanical systems. This paper presents an application of a methodology that uses joint time-frequency distribution (JTFD) as input, instead of the raw signal, to systems with several vibration modes. A most important feature of the present approach is that it can be applied to a system with time-varying damping ratio. Initially the precision and robustness of the method is determined using a synthetic model with multiple harmonic components, one of them displaying a time-varying damping ratio, subsequently the results obtained from experiments with a reduced model are presented. A comparison is made between the results obtained with this methodology and those using the classical technique of Least Squares Complex Exponential Method (LSCE) in order to highlight the advantages of the former, such as, good precision, robustness and excellent performance in extreme cases, e.g., when very low frequency components and time varying damping ratio are present.

키워드

참고문헌

  1. Allemang, R.J. and Brown, D. (1987), Experimental Modal Analysis and Dynamic Component Synthesis, University of Cincinnati, Ohio.
  2. Atlas, L.E., Loughlin, P.J. and Pitton, J.W. (1992), "Signal analysis with cone kernel time-frequency representations and their application to speech", Time-Frequency Signal Analysis, Longman Cheshire, Sydney, Australia.
  3. Bodeux, J.B. and Golinval, J.C. (2003), "Modal identification and damage detection using data driven stochastic subspace and ARMA methods", Mech. Syst. Signal Pr., 17(1), 83-89. https://doi.org/10.1006/mssp.2002.1543
  4. Boltezar, M. and Slavi , J. (2002), "Use of the continuous wavelet transform for the identification of damping", Proceedings of the International Conference on Structural Dynamics Modelling, Madeira.
  5. Boulahbal, D., Golnaraghi, M.F. and Ismail, F. (1999), "Amplitude and phase wavelets maps for the detection of cracks in geared systems", Mech. Syst. Signal Pr., 13(3), 423-436. https://doi.org/10.1006/mssp.1998.1206
  6. Bucher, H. (2001), "Methodologies for the applications of time-frequency techniques to structural dynamics and to the boundary element method", D.Sc. Thesis, Department of Civil Engineering, COPPE/Federal, University of Rio de Janeiro. (in Portuguese)
  7. Burrus, C.S., Gopinath, R.A. and Guo, H. (1998), Introduction to Wavelets and Wavelet Transforms: A Primer, Prentice Hall, Englewood Cliffs, New Jersey.
  8. Carmona, R.A., Hwang, W.L. and Torresani, B. (1997), "Characterization of signals of the ridges of their wavelets transforms", IEEE T. Signal Proces., 45(10), 2586-2590. https://doi.org/10.1109/78.640725
  9. Clough, R.W. and Penzien, J. (1993), Dynamics of Structures, Second Edition, McGraw-Hill, New York.
  10. Cohen, L. (1966), "Generalize phase-space distribution functions", J. Math., 7(5), 781-786.
  11. Cohen, L. (1976), "Quantization problem and variational principle in the phase space formulation of quantum mechanics", J. Math. Phys., 17(10), 1863-1866. https://doi.org/10.1063/1.522807
  12. Cohen, L. (1995), Time-Frequency Analysis, First Edition, New Jersey, Prentice Hall.
  13. Cohen, L. (1996), "A general approach for obtaining joint representations in signal analysis: Part I, Characteristic function operator method", IEEE T. Signal Proces., 44(5), 1080-1090. https://doi.org/10.1109/78.502322
  14. Choi, H.I. and Williams, W.J. (1989), "Improved time frequency representation of multicomponent signals using exponential kernels", IEEE T. Acoust. Speech Signal Proces., 37(6), 862-871. https://doi.org/10.1109/ASSP.1989.28057
  15. Cunningham, G.S. and Williams, J.W. (1993), "Linear high-resolution signal synthesis for time-frequency distributions", Proceedings of the IEEE International Conference Acoustics Speech Signal Processing, Minneapolis, 4(4), 400-403.
  16. Cunningham, G.S. and Williams, J.W. (1996), "Vector-valued time-frequency representations", IEEE T. Signal Proces., 44(7), 1642-1656. https://doi.org/10.1109/78.510613
  17. Daubechies, I. (1992), Ten Lectures on Wavelets, SIAM - Society for Industrial and Applied Mathematics, Pennsylvania.
  18. Daubechies, I. (1996), "Where do wavelets come from? - A personal point of view", Proceedings of the IEEE Special Issue on Wavelets, 84(4), 510-513.
  19. Farge, M. (1992), "Wavelet transforms and their applications to turbulence", Annu. Rev. Fluid Mech., 24, 395- 457. https://doi.org/10.1146/annurev.fl.24.010192.002143
  20. Gokda, H. and Kopmaz, O. (2010) "A new structural damage detection index based on analyzing vibration modes by the wavelet transform", Struct. Eng. Mech., 35(2), 257-260. https://doi.org/10.12989/sem.2010.35.2.257
  21. Gurley, K. and Kareem, A. (1999), "Applications of wavelet transforms in wind", Earthq. Ocean Eng., Eng. Struct., 21(2), 149-167.
  22. Gurley, K., Kijewski, T. and Kareem, A. (2003), "First - and higher-order correlation detection using wavelet transforms", J. Eng. Mech., 129(2), 188-201. https://doi.org/10.1061/(ASCE)0733-9399(2003)129:2(188)
  23. Ibrahim, S.R. and Mickulcik, E. (1977), "A method for the direct identification of vibration parameters from the free responses", Shock Vib., 47(4), 183-198.
  24. Kareem, A. and Gurley, K. (1996), "Damping in structures: its evaluation and treatment of uncertainty", J. Wind Eng. Ind. Aerod., 59(2-3), 131-157. https://doi.org/10.1016/0167-6105(96)00004-9
  25. Kareem, A. and Kijewski, T. (2002), "Time-frequency analysis of wind effects on structures", J. Wind Eng. Ind. Aerod., 90(12-15), 1435-1452. https://doi.org/10.1016/S0167-6105(02)00263-5
  26. Katkhuda, H.N., Dwairi, H.M. and Shatarat, N. (2010), "System identification of steel framed structures with semi-rigid connections", Struct. Eng. Mech., 34(3), 351-366. https://doi.org/10.12989/sem.2010.34.3.351
  27. Kijewski, T. and Kareem, A. (2002a), "On the reliability of a class of system identification techniques: Insights from bootstrap theory", Struct. Saf., 24(2-4), 261-280. https://doi.org/10.1016/S0167-4730(02)00028-0
  28. Kijewski, T. and Kareem, A. (2002b), "On the presence of end effects and associated remedies for wavelet-based analysis", J. Sound Vib., 256(5), 980-988. https://doi.org/10.1006/jsvi.2001.4227
  29. Kijewski, T. and Kareem, A. (2003), "Wavelet transforms for system identification in civil engineering", Comput. Aid Civil Infrast. Eng., 18(5), 339-355. https://doi.org/10.1111/1467-8667.t01-1-00312
  30. Lamarque, C.H., Pernot, S. and Cuer, A. (2000), "Damping identification in multi-degree-of-freedom systems via a wavelet-logarithmic decrement - Part 1: Theory", J. Sound Vib., 253(3), 361-374.
  31. Lin, J. and Qu, L. (2000), "Feature extraction based on morlet wavelet and its application for mechanical fault diagnosis", J. Sound Vib., 234(1), 135-148. https://doi.org/10.1006/jsvi.2000.2864
  32. Magluta, C., Roitman, N., Viero, P.F. and Rosa, L.F.L. (2001), "Experimental estimation of physical properties of a flexible riser", XX OMAE - International Conference on Offshore Mechanics and Arctic Engineering, Rio de Janeiro.
  33. Mohanty, P. and Rixen, D.J. (2006), "Modified ERA method for operational modal analysis in the presence of harmonic excitations", Mech. Syst. Signal Pr., 20, 114-130. https://doi.org/10.1016/j.ymssp.2004.06.010
  34. Mallat, S. (1999), A Wavelet Tour of Signal Processing, Academic Press, New York.
  35. Meirovich, L. (1986), Elements of Vibration Analysis, McGraw-Hill, New York.
  36. Morlet, J., Arens, G., Fourgeau, E. and Giard, D. (1982), "Wave propagation and sampling theory", Geophysics, 47(2), 203-236. https://doi.org/10.1190/1.1441328
  37. Nagarajaiah, S. and Basu, B. (2009), "Output only modal identifi cation and structural damage detection using time frequency & wavelet techniques", Earthq. Eng. Eng. Vib., 8(4), 583-605. https://doi.org/10.1007/s11803-009-9120-6
  38. Paz, M. and Leigh, W. (2003), Structural Dynamics. Theory and Computation, Fifth Edition, Kluwer Academic Publisher, Massachusetts.
  39. Peters, D.R. (2005), Mesoscale Quantization and Self-Organized Stability, http://arXiv.org/abs/physics/0506143.
  40. Piombo, B.A.D., Fasana, A., Marchesiello, S. and Ruzzene, M. (2000), "Modelling and identification of the dynamic response of a supported bridge", Mech. Syst. Signal Proces., 14(1), 74-89.
  41. Rao, S.S. (1995), Mechanical Vibrations, Third Edition, Addison-Wesley, Reading.
  42. Rioul, O. and Duhamel, P. (1992), "Fast algorithms for discrete and continuous wavelet transforms", IEEE T. Inform. Theory, 38(2), 569-586. https://doi.org/10.1109/18.119724
  43. Roshan-Ghias, A., Shamsollahi, M.B., Mobed, M. and Behzad, M. (2007), "Estimation of modal parameters using bilinear joint time-frequency distributions", Mech. Syst. Signal Proces., 21, 2125-2136. https://doi.org/10.1016/j.ymssp.2006.09.009
  44. Staszewski, W.J. and Tomlinson, G.R (1994), "Application of the wavelet transform to fault detection in a spur gear", Mech. Syst. Signal Proces., 8(3), 289-307. https://doi.org/10.1006/mssp.1994.1022
  45. Staszewski, W.J. (1997), "Identification of damping in MDOF systems using time-scale decomposition", J. Sound Vib., 203(2), 283-305. https://doi.org/10.1006/jsvi.1996.0864
  46. Staszewski, W.J. (1998), "Identification of non-linear systems using multi-scale ridges and skeletons of the wavelet transform", J. Sound Vib., 214(4), 639-658. https://doi.org/10.1006/jsvi.1998.1616
  47. Todorovska, M.I. (2001), "Estimation of instantaneous frequency of signals using the continuous wavelet transform", Report CE 01-07, Department of Civil Engineering, University of Southern California.
  48. Thomson, W.T. and Dahleh, M.D. (1998), Theory of Vibration, Prentice Hall, New Jersey.
  49. Ville, J. (1946), "Theory and applications of the concept of analytic signal", Cable. Trans., 2(1), 61-74. (in French)
  50. Wang, S. and Liu, F. (2010), "New accuracy indicator to quantify the true and false modes for eigensystem realization algorithm", Struct. Eng. Mech., 34(5), 625-634. https://doi.org/10.12989/sem.2010.34.5.625
  51. Weaver, Jr., W. and Jonhnston, P.R. (1987), Structural Dynamics by Finite Elements, Prentice Hall, Englewood Cliffs, New Jersey.
  52. Wigner, E.P. (1932), "On the quantum correction for thermodynamic equilibrium", Phys. Rev., 40, 749-759. https://doi.org/10.1103/PhysRev.40.749
  53. Wigner, E.P. (1971), "Quantum-mechanical distribution functions revisited, in W. Yourgrau and Van der Merwe", Perspectives in Quantum Theory, MIT Press.
  54. Zhang, Y., Zhang, Z., Xu, X. and Hua, H. (2005), "Modal parameter identification using response data only", J. Sound Vib., 282, 367-380. https://doi.org/10.1016/j.jsv.2004.02.012
  55. Zhao, Y., Atlas, L.E. and Marks, R.J. (1990), "The use of cone-shaped kernels for generalized time-frequency representations of nonstationary signals", IEEE T. Acoust. Speech Signal Proc., 38(7), 1084-1091. https://doi.org/10.1109/29.57537

피인용 문헌

  1. A concept to reduce vibrations in steel catenary risers by the use of viscoelastic materials vol.77, 2014, https://doi.org/10.1016/j.oceaneng.2013.12.004
  2. An experimental assessment of internal variables constitutive models for viscoelastic materials vol.50-51, 2015, https://doi.org/10.1016/j.ymssp.2014.04.023
  3. Numerical and experimental studies of a building with roller seismic isolation bearings vol.54, pp.3, 2015, https://doi.org/10.12989/sem.2015.54.3.475