References
- ASCE. Standard for the structural design of composite slabs. ANSI/AASCE3-91. American Society of Civil Engineers. New York, 1992. a)
- Abdullah R. and Easterling W. S.(2007), "Determination of composite slab strength using a new element test method," J. Struct. Eng. ASCE, 133(9), 1268-1277. https://doi.org/10.1061/(ASCE)0733-9445(2007)133:9(1268)
- Abdullah R. and Easterling W. S.(2009), "New evaluation and modeling procedure for horizontal shear bond in composite slabs," J. Const. Steel. Res., 65(4), 891-899. https://doi.org/10.1016/j.jcsr.2008.10.009
- Chen S. (2003), "Load carrying capacity of composite slabs with various end constraints," J. Constr. Steel. Res., 59(3), 385-403. https://doi.org/10.1016/S0143-974X(02)00034-2
- Chen S. (2010), Discussion of "Determination of composite slab strength using a new element test method", J. Struct. Eng. ASCE, 136(8), 1032-1034. https://doi.org/10.1061/(ASCE)ST.1943-541X.150
- Daniels B. J. and Crisinel M.(1993), "Composite slab behavior and strength analysis. Part II: comparisons with test results and parametric analysis," J. Struct. Eng. ASCE, 119 (1), 16-35. https://doi.org/10.1061/(ASCE)0733-9445(1993)119:1(16)
- Eurocode 4: Design of composite steel and concrete structures, Part 1.1:General rules and rules for buildings. EN1994-1-1:2004. European Committee for Standardization. Brussels, 2004
- Easterling W. S. and Young C.S. (1991), "Strength of composite slabs," J. Struct. Eng. ASCE, 118(9), 2370-2389.
- Jeong Y.(2008), "Simplified model to predict partial-interactive structural performance of steel-concrete compositeslabs," J. Constr. Steel. Res., 64(2), 238-246. https://doi.org/10.1016/j.jcsr.2007.05.003
- Jolly C. K. and Zubair A. K. M.(1987), "The efficiency of shear-bond interlock between profiled steel sheeting and concrete," Inter. Conference. Steel. Aluminum. Struct., Cardiff. London: Elsevier. 127-136.
- Lopes E. and Simoes R. (2008), "Experimental and analytical behaviour of composite slabs," Steel. Comp. Struct., An. Int'l. J., 8(5), 361-388. https://doi.org/10.12989/scs.2008.8.5.361
- Marimuthu V., et al. (2007), "Experimental studies on composite deck slabs to determine the shear-bond characteristic (m-k) values of the embossed profiled sheet," J. Const. Steel. Res., 63(6), 791-803. https://doi.org/10.1016/j.jcsr.2006.07.009
- Porter, M.L. and Ekberg, C. E.(1976), "Design recommendations for steel deck floor slabs," J. Struct. Div., ASCE, 102(11), 2121-2136.
- Porter, M.L., Ekberg, C.E, Greimann L.F, Elleby H.A.(1976), "Shear-bond analysis of steel-deck-reinforced slabs," J. Struct. Div., ASCE, 102(12), 2255-2268.
- Vainiûnas P, et al.(2006), "Analysis of longitudinal shear behavior for composite steel and concrete slabs," J. Constr. Steel. Res., 62(12), 1264-1269 https://doi.org/10.1016/j.jcsr.2006.04.019
- Wright H.D., Evans H.R., Harding P.W. (1987), "The use of profiled steel sheeting in floor construction," J. Const. Steel. Res., 7(4), 279-295. https://doi.org/10.1016/0143-974X(87)90003-4
- Wright H. D. (1998), "Composite slabs," Prog. Struct. Eng. Mater., 1(2), 178-184. https://doi.org/10.1002/pse.2260010210
Cited by
- Effect of fibers and welded-wire reinforcements on the diaphragm behavior of composite deck slabs vol.19, pp.1, 2015, https://doi.org/10.12989/scs.2015.19.1.153
- Experimental and numerical study of end anchorage in composite slabs vol.115, 2015, https://doi.org/10.1016/j.jcsr.2015.08.039
- Flexural behavior of shallow cellular composite floor beams with innovative shear connections vol.106, 2015, https://doi.org/10.1016/j.jcsr.2014.12.021
- Non-uniform shrinkage in simply-supported composite steel-concrete slabs vol.18, pp.2, 2015, https://doi.org/10.12989/scs.2015.18.2.375
- Numerical procedure for nonlinear behavior analysis of composite slim floor beams vol.106, 2015, https://doi.org/10.1016/j.jcsr.2014.12.015
- Improvement of the behaviour of composite slabs: A new type of end anchorage vol.19, pp.6, 2015, https://doi.org/10.12989/scs.2015.19.6.1381
- Experimental study on the longitudinal shear bond behavior of lightweight aggregate concrete – Closed profiled steel sheeting composite slabs vol.156, 2017, https://doi.org/10.1016/j.conbuildmat.2017.08.108
- Stability condition for the evaluation of damage in three-point bending of a laminated composite vol.15, pp.2, 2013, https://doi.org/10.12989/scs.2013.15.2.203
- Strength of composite slabs with end-anchorage studs vol.168, pp.2, 2015, https://doi.org/10.1680/stbu.13.00039
- Experimental and numerical study of the bond–slip relationship for post-tensioned composite slabs vol.114, 2015, https://doi.org/10.1016/j.jcsr.2015.08.018
- Experimental Study of In-Plane Shear Behavior of Fiber-Reinforced Concrete Composite Slabs vol.142, pp.3, 2016, https://doi.org/10.1061/(ASCE)ST.1943-541X.0001413
- Effects of non-uniform shrinkage on the long-term behaviour of composite steel-concrete slabs vol.15, pp.2, 2015, https://doi.org/10.1007/s13296-015-6012-7
- Shear bond mechanism of composite slabs - A universal FE approach vol.67, pp.10, 2011, https://doi.org/10.1016/j.jcsr.2011.03.021
- An experimentally validated study for open rib profiles steel‐concrete composite slabs behavior in partial connection vol.3, pp.3, 2019, https://doi.org/10.1002/cepa.1055
- Ultimate strength behavior of steel plate-concrete composite slabs: An experimental and theoretical study vol.37, pp.6, 2011, https://doi.org/10.12989/scs.2020.37.6.741