Steel and Composite Structures

Techno-Press (테크노프레스)
권호 표지
DOI QR코드

DOI QR Code

Comparison of steels via SMAW and MIG welding methods under industrial loads

  • Soy, Ugur (Department of Metallurgical & Materials Science Engineering, Faculty of Technology, Sakarya University, Esentepe Campus)
  • Received : 2010.12.29
  • Accepted : 2011.04.14
  • Published : 2011.05.25
⟨ Previous Next ⟩

Abstract

In this study, the deflection and deformation behaviours of IPN80 steel beam and column were investigated under the different industrial loads. Single-sided welds were applied to IPN80 steel beams using shielded metal arc (SMAW) and metal inert gas welding (MIG) method in the form of T-type. After that, the performance of SMAW and MIG welded joints were identified using beam bending test under 500 and 3000 N loads. SMAW and MIG methods were compared with each other to understand the deflection and deformation behaviours of the welded steel structures. Lower deformation and deflection were obtained in MIG welded steel beams. The results show that, steel beams welded MIG method has higher load capacity than SMAW welded ones. MIG welding method is more reliable than the SMAW method for the combining performance and load capacity.

Keywords

References

  1. Afolabi, A.S. (2008), "Effect of electric arc welding parameters on corrosion behaviour of austenitic stainless steel in chloride medium," AU J.T., 11(3), 171-180.
  2. Agarwal, R.L. (1992), Welding Engineering: A Textbook for Engineering Students, fourth ed. Khanaa Publications, Nai Sarai, Delhi, India
  3. Ates, H. and Turker, M. (1999), Determination of penetration with various welding parameters of electrical arc and GMA welding, Gazi Univ J, 12(3), 655-664.
  4. Bailey, C.C. (1999), The Behaviour of Asymmetric Slim Floor Steel Beams in Fire, J. Cons. Steel Res., 50(3), 235-257. https://doi.org/10.1016/S0143-974X(98)00247-8
  5. Black, J.T. and Kohser, R.A. (2008), Materials & Processes in Manufacturing, tenth ed. Wiley Interscience, New Jersey, 851-853.
  6. Callister, E.W. (1993), Pipeline Rules of Thumb Handbook, Third Edition. Golf Publishing Company, Texas.
  7. Cary, H.B. (1994), Modern. Welding. Technology., Third Edition, Prentice Hall, Inc, New Jersey.
  8. Chan, B., Pacey, J. and Bibby, M. (1999), "Modelling gas metal arc weld geometry using artificial neural network technology," Can. Metall. Quart., 38(1), 43-51. https://doi.org/10.1016/S0008-4433(98)00037-8
  9. Deren, H. (1995), Steel. Struct., Istanbul Technical University Press, Istanbul.
  10. De Salazar, J.M.G., Soria, A. and Barrena, M.I. (2007), The effect of N-2 addition upon the MIG welding process of duplex steels, J. Mater. Science, 42(13), 4892-4898. https://doi.org/10.1007/s10853-006-0557-y
  11. Groover, M.P. (2007), Fundamentals of Modern Manufacturing: Materials, Processes, and Systems, third ed. Wiley Interscience, New Jersey, 706-709.
  12. Hattap, S. and Essiz, O. (2005), Steel construction versus earthquake, Earthquake symposium, 23-25 March, Kocaeli, Turkey.
  13. Karaduman, M. (2002), Steel Structures, v: 1, fourth edition, Atlas Press, Istanbul, Turkey.
  14. Kayhan, A.H. and enel, S.M. (2010), "Fragility curves for single story precast industrial buildings," Teknik Dergi, 336, 5161-5184.
  15. Magasdi, A., Dobranszky, J. and Tusz, F. (2007), Fatigue properties of welded joints of high-carbon steels, 5thHungarian Conference on Materials, Science, Testing and Informatics, Materials Science, Testing and Informatics III, 47-53.
  16. Oates, W.R. and Saitta, A.M. (1998), Welding Handbook, Volume-4, Eighth Edition, American Welding Society, Miami.
  17. Oguz, B. (1993), Handbook of Arc Welding, Oerlikon Publications, Istanbul, Turkey.
  18. Tulbentci, K. (1990), MIG/MAG welding methods, Gedik Publications, Istanbul.
  19. Uslu, S., Soy, U., Findik, F. and Oz, C. (2010), Optimization of arc welding parameters via a computer program, Proceedings of the international materials symposium, Denizli, Turkey, 23-27.

Cited by

  1. Numerical modelling of stress and deflection behaviour for welded steel beam-column vol.12, pp.3, 2012, https://doi.org/10.12989/scs.2012.12.3.249
  2. The effect of plastic deformation rate on the wear performance of hardfaced coatings vol.61, pp.5, 2017, https://doi.org/10.1007/s40194-017-0476-3
  3. Three-dimensional numerical and linearly distributed multi-parameter fitted analytical modeling of hybrid beam–column with partially welded flush end-plate connection vol.21, pp.12, 2018, https://doi.org/10.1177/1369433218754698