DOI QR코드

DOI QR Code

Parameters influencing seismic response of horizontally curved, steel, I-girder bridges

  • Linzell, Daniel G. (Department of Civil and Environmental Engineering, The Pennsylvania State University) ;
  • Nadakuditi, Venkata P. (Stress Offshore, Inc.)
  • 투고 : 2010.12.09
  • 심사 : 2010.11.27
  • 발행 : 2011.01.25

초록

This study examines the influence of curved, steel, I-girder bridge configuration on girder end reactions and cross frame member forces during seismic events. Simply-supported bridge finite element models were created and examined under seismic events mimicking what could be experienced in AASHTO Seismic Zone 2. Bridges were analyzed using practical ranges of: radius of curvature; girder and cross frame spacings; and lateral bracing configuration. Results from the study indicated that: (1) radius of curvature had the greatest influence on seismic response; (2) interior (lowest radius) girder reactions were heavily influenced by parameter variations and, in certain instances, uplift at their bearings could be a concern; (3) vertical excitation more heavily influenced bearing and cross frame seismic response; and (4) lateral bracing helped reduce seismic effects but using bracing along the entire span did not provide additional benefit over placing bracing only in bays adjacent to the supports.

키워드

참고문헌

  1. American Association of State Highway and Transportation Officials. (2006), LRFD bridge design specifications, Washington D.C.
  2. Al-Baijat, H.M. (1999), "Behavior of horizontally curved bridges under static load and dynamic load from earthquakes," Ph.D thesis, Illinois Institute of Technology, Chicago, IL.
  3. Chang, P.C., Heins, C.P., Guohao, L., and Ding, S. (1985), "Seismic study of curved bridges using the rayleighritz method," Computers and Structures 21(6), 1095-1104. https://doi.org/10.1016/0045-7949(85)90164-6
  4. Chaudhari, S.K. (1975), "Dynamic response of horizontally curved I-girder bridges due to moving loads," Ph.D thesis, Carnegie Mellon University, Pittsburgh, PA.
  5. Chaudhari, S.K. and Shore, S. (1977), "Dynamic analysis of horizontally curved I-girder bridges," Journal of Structural Division, ASCE 103(8), 1589-1604.
  6. Christians, P.P (1967), "The dynamic response of horizontally curved bridges subjected to moving loads," PhD thesis, Carnegie Mellon University, Pittsburgh, PA.
  7. Chen, Y. (1995), "Effects of modeling and analysis methods on seismic responses of curved bridges," in Proceedings of the10th Conference on Engineering Mechanics, ASCE, vol. 2, Boulder, CO, 1078-1081.
  8. Culver, C.G. (1967), "Natural frequencies of horizontally curved beams," Journal of Structural Division, ASCE, 93(2), 187-203.
  9. Das, P.K. (1971), "Coupled vibration of a horizontally curved bridge subjected to simulated highway loadings," Ph.D thesis, Carnegie Mellon University, Pittsburgh, PA.
  10. Huang, D., Wand, T.L. and Shahawy, M, "(1995), Dynamic behavior of horizontally curved I-girder bridges," Computers and Structures, 57, 703-714. https://doi.org/10.1016/0045-7949(95)00061-K
  11. Itani, A.M., Bruneau, M., Carden, L. and Buckle, I.G. (2004), "Seismic behavior of steel girder bridge superstructures," Journal of Bridge Engineering, ASCE 9(3), 243-249. https://doi.org/10.1061/(ASCE)1084-0702(2004)9:3(243)
  12. Imbsen, R.A (2006), "Recommended LRFD guidelines for the seismic design of highway bridges, NCHRP, National Cooperative Highway Research Program, Transportation Research Board.
  13. Julian, F.D.R., Hayashikawa, T. and Obata, T. (2007), "Seismic performance of isolated curved steel viaducts equipped with deck unseating prevention cable restrainers," Journal of Constructional Steel Research 63(2), 237-253. https://doi.org/10.1016/j.jcsr.2006.03.008
  14. Kim, W.S. (2004), "Live load radial moment distribution for horizontally curved bridges," MSc Thesis, The Pennsylvania State University, University Park, PA.
  15. Maneetes, H. and Linzell, D. (2003), "Cross-frame and lateral bracing influence on curved steel bridge free vibration response," Journal of Constructional Steel Research 59(9), 1101-1117. https://doi.org/10.1016/S0143-974X(03)00032-4
  16. McElwain, B.A. and Laman, J.A. (2000), "Experimental verification of horizontally curved steel I-girder bridge behavior," Journal of Bridge Engineering, ASCE 5(4), 284-292. https://doi.org/10.1061/(ASCE)1084-0702(2000)5:4(284)
  17. Mwafy, A.M. and Elnashai, A.S. (2007), "Assessment of seismic integrity of multi-span curved bridges in midamerica. Part I: implications of design assumptions on capacity estimates and limit states of multi-span curved bridges," Mid-American Earthquake Center, University of Illinois at Urbana-Champaign.
  18. National Cooperative Highway Research Program. (2006), NCHRP Report 563: Development of LRFD Specifications for horizontally curved steel girder bridges, Transportation Research Board, Washington, D.C.
  19. Oestel, D.J. (1968), "Dynamic response of multi-span curved bridges," MSc thesis, Carnegie Mellon University, Pittsburgh, PA.
  20. Ramakrishnan, R. and Kunukkasseril, V.X. (1976), "Free vibration of stiffened circular bridge decks," Journal of Sound and Vibration 44(2), 209-221. https://doi.org/10.1016/0022-460X(76)90769-0
  21. Tan, C.P. and Shore, S. (1968), "Response of horizontally curved bridge to moving loads," Journal of Structural Division, ASCE 94(ST9), 2135-2151.
  22. Suarez, L.E. and Montejo, L.A. (2005), "Generation of artificial earthquakes via the wavelet transform," International Journal of Solids and Structures 42(21-22), 5905-5919. https://doi.org/10.1016/j.ijsolstr.2005.03.025
  23. Suarez, L.E. and Montejo, L.A. (2007), "Applications of the wavelet transform in the generation and analysis of spectrum-compatible records," Structural Engineering and Mechanics 27(2), 173-197. https://doi.org/10.12989/sem.2007.27.2.173
  24. Yonezawa, H. (1962), "Moments and free vibrations in curved girder bridges," Journal of the Engineering Mechanics Division, ASCE 88(1), 1-21.
  25. Yoon, K.Y. and Kang, Y.J. (1998), "Effects of cross beams on free vibration of horizontally curved I-girder bridges," in Proceedings - 1998 Annual Technical Session, and Meeting, Structural Stability Research Council, Atlanta, GA, 165-174.
  26. Yoon, K.Y., Kang, Y.J., Choi, Y.J., and Park, N.H. (2005), "Free vibration analysis of horizontally curved steel Igirder bridges," Thin-Walled Structures, 43(4), 679-699. https://doi.org/10.1016/j.tws.2004.07.020

피인용 문헌

  1. Experimental study on seismic performance of partial penetration welded steel beam-column connections with different fillet radii vol.17, pp.6, 2014, https://doi.org/10.12989/scs.2014.17.6.851
  2. Statistical determination of significant curved I-girder bridge seismic response parameters vol.12, pp.2, 2013, https://doi.org/10.1007/s11803-013-0168-y
  3. The Influence of the Load Model and other Parameters on the Dynamic Behavior of Curved-in-Plane Bridges vol.3, pp.1, 2016, https://doi.org/10.1515/cls-2016-0019
  4. Nonlinear Seismic Response and Parametric Examination of Horizontally Curved Steel Bridges Using 3D Computational Models vol.18, pp.3, 2013, https://doi.org/10.1061/(ASCE)BE.1943-5592.0000345
  5. Analytical Fragility Functions for Horizontally Curved Steel I-Girder Highway Bridges vol.31, pp.4, 2015, https://doi.org/10.1193/022213EQS049M
  6. Probabilistic seismic demand model for curved reinforced concrete bridges vol.10, pp.5, 2012, https://doi.org/10.1007/s10518-012-9362-y
  7. Geometric parameters affecting seismic fragilities of curved multi-frame concrete box-girder bridges with integral abutments vol.122, 2016, https://doi.org/10.1016/j.engstruct.2016.04.037
  8. Effects of bottom bracings on torsional dynamic characteristics of horizontally curved twin I-girder bridges with different curvatures vol.11, pp.2, 2012, https://doi.org/10.1007/s11803-012-0106-4
  9. Shake-Table Test for a Typical Curved Bridge: Wave Passage and Local Site Effects vol.20, pp.2, 2015, https://doi.org/10.1061/(ASCE)BE.1943-5592.0000643
  10. Web Buckling and Ultimate Strength of Composite Plate Girders Subjected to Shear and Bending vol.15, pp.02, 2015, https://doi.org/10.1142/S0219455414500473
  11. Seismic vulnerability assessment of a Californian multi-frame curved concrete box girder viaduct using fragility curves vol.12, pp.12, 2016, https://doi.org/10.1080/15732479.2016.1152586
  12. Seismic performance of skewed and curved reinforced concrete bridges in mountainous states vol.70, 2014, https://doi.org/10.1016/j.engstruct.2014.03.039
  13. Impact of seismic excitation direction on the fragility analysis of horizontally curved concrete bridges vol.16, pp.10, 2018, https://doi.org/10.1007/s10518-018-0400-2
  14. An improved CWT-based algorithm for the generation of spectrum-compatible records vol.5, pp.1, 2013, https://doi.org/10.1186/2008-6695-5-26
  15. Influence of truss rod damage on prestressed concrete chord-stayed truss T-frame bridge vol.22, pp.7, 2011, https://doi.org/10.21595/jve.2020.21347
  16. Seismic analysis of high-rise steel frame building considering irregularities in plan and elevation vol.39, pp.1, 2011, https://doi.org/10.12989/scs.2021.39.1.065
  17. Investigation on vehicle lateral instability when crossing a curved highway bridge during an earthquake vol.17, pp.5, 2021, https://doi.org/10.1080/15732479.2020.1766515
  18. Test and Numerical Model of Curved Steel-Concrete Composite Box Beams under Positive Moments vol.14, pp.11, 2011, https://doi.org/10.3390/ma14112978