초록
건설 프로젝트의 대형화와 시공장소의 다양화에 따라 지반 조사 내용이 다양해지고 있다. 더욱이 날로 엄격해지는 시공조건으로 인해 보다 높은 수준의 지반정보가 요구되고 있다. 그러나 우리나라에서는 최근까지도 비교적 결과의 신뢰도가 낮은 표준관입실험 등의 원위치 실험법에 의존하고 있는 현실이다. 본 논문에서는 복합적인 지반의 거동 특성 평가를 위하여 연약지반은 물론 암반에서도 에너지 변화를 측정할 수 있는 새로운 콘관입 실험기를 개발하고자 하였다. 본 연구에서는 롯드의 체결 방식에 따른 에너지 감쇠를 평가하기 위해 롯드를 인위적으로 불완전하게 체결하거나, 전체 길이는 일정하게 유지시키면서 체결된 롯드의 수를 변화시키며 실험을 수행하였다. 또한, 체결 조건이 다른 롯드에서 탄성파의 전달율과 반사율을 적용하여 에너지 손실을 평가 하였다. 그리고 정동적 콘관입 실험 장비를 제작하여 두부와 선단부에 변형률계와 가속도계를 부착함으로써 에너지 손실을 실내 실험을 통하여 평가하고자 하였다. 실험 결과 롯드의 체결 상태가 완벽하지 않으면 에너지 전달률이 급격히 감소하는 것을 실험과 시뮬레이션을 통하여 알 수 있었다. 또한 실내 실험결과 새로 개발된 정동적 콘 관입 실험기의 두부와 선단부의 전달에너지가 다름을 알 수 있었다. 본 연구에서는 두부는 물론 선단부에서의 에너지 평가가 필요함을 알 수 있었다.
The advanced geotechnical information has been required to determine the accurate design parameters for complex construction. However, the Standard Penetration Test (SPT), which has low reliability, has been used to estimate the subsurface condition in the field. The objective of this paper is development and application of the Static-Dynamic penetrometer, which detects the resistances in soft clay, sand and rock. The energy losses according to the rod connection methods (perfect or non-perfect connection, and number rods) are experimentally evaluated. The reflection and transmission ratios are used to investigate the energy loss by a simulation. The static-dynamic cone penetrometer, in which the accelerometers and strain gauges are installed on the cone tip and the rod head, is used to estimate the energy loss during penetration by impacts. The experimental and simulation studies show that the transferred energy through rods with non-perfect connection dramatically decreases. Furthermore, the transferred energy on the rod head is not the same as that on the cone tip. This study demonstrates that the energy loss should be evaluated on the cone tip.