Journal of Pharmaceutical Investigation

  • 제41권2호
  • /
  • Pages.67-73
  • /
  • 2011
  • /
  • 2093-5552(pISSN)
  • /
  • 2093-6214(eISSN)
한국약제학회 (The Korean Society of Pharmaceutical Sciences and Technology)
권호 표지
DOI QR코드

DOI QR Code

Effect of Curing and Compression Process on the Drug Release of Coated Ion-Exchange Resin Complexes

  • Jeong, Seong-Hoon (College of Pharmacy, Pusan National University) ;
  • Wang, Hun-Sik (Center for nanotechnology-based new drug dosage form, College of Pharmacy, Chungnam National University) ;
  • Koo, Ja-Seong (Center for nanotechnology-based new drug dosage form, College of Pharmacy, Chungnam National University) ;
  • Choi, Eun-Joo (College of Pharmacy, Pusan National University) ;
  • Park, Ki-Nam (Department of Pharmaceutics & Biomedical Engineering, Purdue University)
  • 투고 : 2011.03.03
  • 심사 : 2011.03.26
  • 발행 : 2011.04.20
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

Ion exchange resins can be one of the good carriers for sustained drug release. However, the sustained release may not be enough only with themselves and hence film coating with rate controlling polymers can be applied to have a further effect on the drug release. Due to the environmental and economic issues of organic solvent for the polymer coating, aqueous polymeric systems were selected to develop dosage forms. Among the many aqueous polymeric dispersions for the film coating, EC (ethylcellulose) based polymers such as Aquacoat$^{(R)}$ ECD and Surelease$^{(R)}$ were evaluated.A fluid-bed coating was applied as a processing method. The drug release rate was quite dependent on the coating level so the release rate could be modified easily by changing different levels of the coating. The drug release rate in the Aquacoat$^{(R)}$ coated resin particles was strongly dependent on curing, which is a thermal treatment to make homogeneous films and circumvent drug release changes during storage. After dissolution test using the compressed tablets in which the coated resin particles are contained, inhomogeneous coating and even pores could be observed showing that the mechanical properties of EC were not resistant to granulation and compaction process. However, when tablets were prepared in different batches, the release profiles were almost identical showing the feasibility of the coated resin particle as incorporated into the tablet formulation.

키워드

참고문헌

  1. Atyabi, F., Sharma, H.L., Mohammad, H.A.H., Fell, J.T., 1996. Controlled drug release from coated floating ion exchange resin beads. J. Control. Release 42, 25-28. https://doi.org/10.1016/0168-3659(96)01343-0
  2. Bhaskar, R., Murthy, R.S.R., Miglani, B.D., Viswanathan, K., 1986. Novel Method to evaluate diffusion controlled release of drug from resinate. Int. J. Pharm. 28, 59-66. https://doi.org/10.1016/0378-5173(86)90147-X
  3. Bodmeier, R., 1997. Tableting of coated pellets. Eur. J. Pharm. Biopharm. 43, 1-8. https://doi.org/10.1016/S0939-6411(96)00028-8
  4. Bodmeier, R., Paeratakul, O., 1997. Plasticizer uptake by aqueous colloidal polymer dispersions used for the coating of solid dosage forms. Int. J. Pharm. 152, 17-26. https://doi.org/10.1016/S0378-5173(97)04882-5
  5. Dashevsky, A., Kolter, K., Bodmeier, R., 2004. Compression of pellets coated with various aqueous polymer dispersions. Int. J.Pharm. 279, 19-26. https://doi.org/10.1016/j.ijpharm.2004.03.019
  6. Fu, Y., Jeong, S.H., Park, K., 2005. Fast-melting tablets based on highly plastic granules. J. Control. Release 109, 203-210. https://doi.org/10.1016/j.jconrel.2005.09.021
  7. Ghebre-Sellassie, I., 1994. Multiparticulate oral drug delivery. ed., New York: Marcel Dekker, Inc.
  8. Langer, D.L., 1993. Polymer-controlled drug delivery systems. Accounts Chem. Res. 26, 537-542. https://doi.org/10.1021/ar00034a004
  9. Motycka, S., Nairn, J.G., 1978. Influence of wax coatings on release rate of anions from ion-exchange resin beads. J. Pharm. Sci. 67, 500-503. https://doi.org/10.1002/jps.2600670416
  10. Nagai, T., Obara, S., Kokubo, H., Hoshi, N., 1997. Application of HPMC and HPMCAS to aqueous film coating of pharmaceutical dosage forms. ed., New York: Marcel Dekker, Inc. pp. 177-225.
  11. Wesseling, M., Bodmeier, R., 2001. Influence of plasticization time, curing conditions, storage time, and core properties on the drug release from Aquacoat-coated pellets. Pharm. Dev. Technol. 6, 325-331. https://doi.org/10.1081/PDT-100002614
  12. Wheatley, T.A., Steuernagel, C.R., 1997. Latex emulsions for controlled drug delivery. ed., New York: Marcel Dekker, Inc. pp. 1-54.