한국분말재료학회지 (Journal of Powder Materials)

  • 제18권2호
  • /
  • Pages.168-171
  • /
  • 2011
  • /
  • 2799-8525(pISSN)
  • /
  • 2799-8681(eISSN)
한국분말재료학회 (*구 분말야금학회) (The Korean Powder Metallurgy & Materials Institute)
권호 표지
DOI QR코드

DOI QR Code

마그네슘의 결정립 성장과 집합조직: 상장모델 계산

Grain Growth and Texture Evolution of Mg: Phase Field Modeling

  • 김동욱 (국민대학교 신소재공학부) ;
  • 차필령 (국민대학교 신소재공학부)
  • Kim, Dong-Uk (School of Advanced Materials Engineering, Kookmin University) ;
  • Cha, Pil-Ryung (School of Advanced Materials Engineering, Kookmin University)
  • 투고 : 2011.02.23
  • 심사 : 2011.04.01
  • 발행 : 2011.04.28
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

We investigate grain growth behavior of poly-crystalline Mg sheet having strong basal fiber texture using phase field model for grain growth and micro-elasticity. Strong initial basal texture was maintained when external load was not imposed, but was weaken when external biaxial strain was imposed. Elastic interaction between elastic anisotropy of Mg grain and external load is the reason why texture evolution occurs.

키워드

참고문헌

  1. S. Morozumi, M. Kikuchi and H. Yoshinaga: Trans. JIM, 17 (1976) 158. https://doi.org/10.2320/matertrans1960.17.158
  2. S. G. Kim, D. I. Kim, W. T. Kim and Y. B. Park: Phys. Rev. E, 74 (2006) 061605. https://doi.org/10.1103/PhysRevE.74.061605
  3. I. Steinbach and M. Apel: Physica D, 217 (2006) 153. https://doi.org/10.1016/j.physd.2006.04.001
  4. D.-U. Kim, S. G. Kim, W. T. Kim, J. H. Cho, H.-N. Han and P.-R. Cha: Scripta Mater., in press.
  5. P.-R. Cha, D.-H. Yeon and S. H. Chung: Scripta Mater., 52 (2005) 1241. https://doi.org/10.1016/j.scriptamat.2005.02.026
  6. P. Yu, S.Y. Hu, L.Q. Chen and Q. Du: J. Comp. Phys., 208 (2005) 34. https://doi.org/10.1016/j.jcp.2005.02.015
  7. S. Matthies: Phys. Status Solidi, 101 (1980) K111. https://doi.org/10.1002/pssb.2221010247
  8. J. A. Valle, M. T. Perez-Prado and O. A. Ruano: Mater. Sci. Eng. A, 355 (2003) 68. https://doi.org/10.1016/S0921-5093(03)00043-1
  9. M. T. Perez-Prado and O. A. Ruano: Scripta Mater., 48 (2003) 59. https://doi.org/10.1016/S1359-6462(02)00346-9
  10. Y. Chino, J.-S. Lee, K. Sassa, A. Kamiya and M. Mabuchi: Materials Lett., 60 (2006) 173. https://doi.org/10.1016/j.matlet.2005.08.012
  11. H. T. Jeong and T. K. Ha: J. Mater. Proc. Tech., 559 (2007) 187.
  12. M.R. Barnett, M. D. Nave and C. J. Bettles: Mater. Sci. Eng. A, 386 (2004) 205. https://doi.org/10.1016/j.msea.2004.07.030
  13. Q. Jin, S.-Y. Shim and S.-G. Lim: Scripta Mater., 55 (2006) 843. https://doi.org/10.1016/j.scriptamat.2006.05.040