한국분말재료학회지 (Journal of Powder Materials)

  • 제18권2호
  • /
  • Pages.129-134
  • /
  • 2011
  • /
  • 2799-8525(pISSN)
  • /
  • 2799-8681(eISSN)
한국분말재료학회 (*구 분말야금학회) (The Korean Powder Metallurgy & Materials Institute)
권호 표지
DOI QR코드

DOI QR Code

Fabrication of Macroporous Carbon Foam with Uniform Pore Size Using Poly(methyl methacrylate) Particles As The Template

  • 투고 : 2011.02.28
  • 심사 : 2011.03.21
  • 발행 : 2011.04.28
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

Herein, macroporous carbon materials were readily prepared by carbonization of cured body of resorcinol and formaldehyde using poly(methyl methacrylate) colloid microspheres which were employed as the template in the gelation of resorcinol with formaldehyde. The gel in the water was solvent exchanged with methanol and the wet gel was dried. After carbonization of the template-gel composite at $800^{\circ}C$, it was found that pores were left corresponding to the size of the template, yielding carbon materials with a fine porous structure with enlarged surface area and significant porosity. Properties of the carbon foams including the structure, morphology, thermal stability, and porosity were investigated. Finally, it was concluded that the method using polymer colloids as the template provided a facile route to prepare carbon foams.

키워드

참고문헌

  1. F. Rodriguez-Reinoso: Adv. Mater., 10 (1998) 1157. https://doi.org/10.1002/(SICI)1521-4095(199810)10:15<1157::AID-ADMA1157>3.0.CO;2-N
  2. J. Lee, J. Kim and T. Hyeon: Adv. Mater., 18 (2006) 2073. https://doi.org/10.1002/adma.200501576
  3. T. Kyotani: Carbon, 38 (2000) 269. https://doi.org/10.1016/S0008-6223(99)00142-6
  4. R. W. Pekala: J. Mater. Sci., 24 (1989) 3221. https://doi.org/10.1007/BF01139044
  5. H. Marsh and B. Rand: Carbon, 9 (1971) 63. https://doi.org/10.1016/0008-6223(71)90144-8
  6. Z. Hu, M. P. Srinivasan and Y. Ni: Adv. Mater., 12 (2000) 62. https://doi.org/10.1002/(SICI)1521-4095(200001)12:1<62::AID-ADMA62>3.0.CO;2-B
  7. S. Woo, K. Dokko, K. Sasajima, T. Takei and K. Kanamura: Chem. Commun., 39 (2006) 4099.
  8. T. Guo, J. Zhu, X. Chen, M. Song and B. Zhang: J. Noncry. Sol., 353 (2007) 2893. https://doi.org/10.1016/j.jnoncrysol.2007.06.023
  9. S. Shen, E. D. Sudol and M. S. El-Aasser: J. Polym. Sci. Part A: Polym. Sci., 32 (1994) 1087. https://doi.org/10.1002/pola.1994.080320611
  10. M. Mizaeian and P. J. Hall: Elecrochim. Acta, 54 (2009) 7444. https://doi.org/10.1016/j.electacta.2009.07.079
  11. H. Tamon, H. ishizaka, M. Mikami and M. Okazaki: Carbon., 35 (1997) 791. https://doi.org/10.1016/S0008-6223(97)00024-9
  12. C. R. Silva and C. Airoldi: J. Colloid Interf. Sci., 187 (1997) 381. https://doi.org/10.1006/jcis.1996.4690
  13. P. Lorjai, S. Wongkasemjit and T. Chaisuwan: Mater. Sci. Eng. A, 527 (2009) 77. https://doi.org/10.1016/j.msea.2009.07.032
  14. M. Inagaki, T. Morishita, A. Kuno, T. Kito, M. Hirano, T. Suwa and K. Kusakawa: Carbon, 42 (2004) 497. https://doi.org/10.1016/j.carbon.2003.12.080
  15. S. Zhang, M. Liu, L. Gan, F. Wu, Z. Xu, Z. Hao and L. Chen: New Carbon Mater., 25 (2010) 9. https://doi.org/10.1016/S1872-5805(09)60012-3