Journal of Power Electronics

  • 제11권1호
  • /
  • Pages.37-44
  • /
  • 2011
  • /
  • 1598-2092(pISSN)
  • /
  • 2093-4718(eISSN)
전력전자학회 (The Korean Institute of Power Electronics)
권호 표지
DOI QR코드

DOI QR Code

Acoustic Noise Reduction and Power Factor Correction in Switched Reluctance Motor Drives

  • 투고 : 2010.01.20
  • 발행 : 2011.01.20
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

In this paper, a four-phase 8/6-pole 4-kW SR motor drive model is presented. Based on experimental data, the model allows an accurate simulation of a drive in dynamic operation. Simulations are performed and a laboratory type set-up is built based on a TI TMS320F2812 platform to experimentally verify the theoretical results obtained for a SR motor. To reduce acoustic noise and to correct the power factor of this drive, a two-stage power converter is proposed that uses a current source rectifier (CSR) as the input stage for the asymmetrical converter of the studied SRM. Employing the space-vector modulation (SVM) method in matrix converters, the CSR switching allows the dc link's capacitors to be eliminated and the power factor of the SRM drive to be improved. As the electrical motive force (emf) is directly proportional to the rotor speed, the input voltage to the machine can be programmed to be a function of the speed with the modulation index of the CSR, leading to a reduction in the acoustic noise of the SRM drive. Simulation of the whole SRM drive system is performed using MATLAB-Simulink. The results fully comply with the required conditions such as power factor correction with an improvement in the THD.

키워드

참고문헌

  1. R. Krishnan, Switched Reluctance Motor Drives, Boca Raton, FL: CRC Press, 2001.
  2. J. Pyrhonen, T. Jokinen, V. Hrabovcova': translated by H. Niemela, textitDesign of Rotating Electrical Machines, John Wiley & Sons, 2008.
  3. D.H. Lee, Z.G. Lee, J. Liang, , J. Ahn, "Single-phase SRM drive with torque ripple reduction and power factor correction," IEEE Trans. on Industry Applications, Vol. 43, No. 6, pp. 1578-1587, Nov./Dec. 2007. https://doi.org/10.1109/TIA.2007.908162
  4. V. Ramanarayanan, L. Venkatesha, D. Panda, "Flux-linkage characteristics of switched reluctance motor," Power Electronics, Drives and Energy Systems for Industrial Growth, Vol.1, pp. 281-285, Jan. 1996.
  5. V. Ramanarayanan, D. Panda, "Mutual coupling and Its effect on steadystate performance and position estimation of even and odd number phase switched reluctance motor drive," IEEE Trans. on Magnetics, Vol. 43, No. 8, pp. 3445-3456, Aug. 2007. https://doi.org/10.1109/TMAG.2007.898101
  6. H. Keunsoo, L. Cheewoo, K. Jaehyuck, R. Krishnan, O. Seok-Gyu, "Design and development of low-cost and high-efficiency variable-speed drive system with switched reluctance motor," IEEE Trans. on Industry Applications, Vol. 43, No. 3, pp. 703-713, May/Jun. 2007. https://doi.org/10.1109/TIA.2007.895744
  7. D. Panda, V. Ramanarayanan, "Reduced acoustic noise variable DCbus- voltage-based sensorless switched reluctance motor drive for HVAC applications," IEEE Trans. on Industrial Electronics, Vol. 54, No. 4, pp. 2065- 2078, Aug. 2007.
  8. G. Rim, R. Krishnan, "Variable speed constant frequency power conversion with a switched reluctance machine," Applied Power Electronics Conference and Exposition - APEC 1994, Vol.1, pp. 63-71, Feb. 1994.
  9. L. Huber and D. Borojevic, "Space vector modulated three-phase to three-phase matrix converter with input power factor correction," IEEE Trans. on Industry Applications, Vol. 31, No. 6, pp. 1234-1246, Nov./Dec. 1995. https://doi.org/10.1109/28.475693

피인용 문헌

  1. Acoustic Noise/Vibration Reduction of a Single-Phase SRM Using Skewed Stator and Rotor vol.60, pp.10, 2013, https://doi.org/10.1109/TIE.2012.2217715