Structural Safety Analysis of Clutch System

클러치의 구조 안전 해석

  • Cho, Jae-Ung (Department of Mechanical & Automotive Engineering, Kongju National University) ;
  • Han, Moon-Sik (Department of Mechanical & Automotive Engineering, Keimyung University)
  • 조재웅 (공주대학교 기계자동차공학부) ;
  • 한문식 (계명대학교 기계자동차공학과)
  • Received : 2011.04.04
  • Accepted : 2011.05.02
  • Published : 2011.09.01

Abstract

This study analyzes stress, fatigue and vibration at clutch on the rotation of wheel. Eigenfrequencies from 1'st to 6'th order about clutch assembly are shown with the vibration at more than 800Hz. Maximum equivalent stress is shown with the frequency of 800Hz in case of the harmonic vibration applied with force. Among the cases of nonuniform fatigue loads, 'SAE bracket history' with the severest change of load becomes most unstable but 'Sample history' becomes most stable. In case of 'Sample History' with the average stress of 0MPa to $-10^5$ MPa and the amplitude stress of 0MPa to $10^5$ MPa, the possibility of maximum damage becomes 3.23%. This stress state can be shown with 6 times more than the damage possibility of 'SAE bracket history' or 'SAE transmission'. The structural result of this study can be effectively utilized with the safe design of clutch.

Keywords

References

  1. C. K. Kim and I. K. Lee, "Failure Study for Tribological Characteristic Analysis of a Clutch System in Passenger Cars," Korean Society of Tribologist & Lubrication Engineers, Vol.22, No.4, pp.196-202, 2006.
  2. M. D. Hur, S. U. Lee, G. Y. Kim and S. S. Kang, "Analysis of Pressure Plate Behavior of a Clutch Including Thermal and Mechanical Material Properties," Journal of the Korean Society of Marine Engineering, Vol.33, No.4, pp.524-532, 2009. https://doi.org/10.5916/jkosme.2009.33.4.524
  3. B. G. Lim, T. G. Seo and S. H. Kim, "Experimental Analysis on the Performance Condition of an Anti-overload Clutch," Dynamics and Control Division of Mechanical Science and Engineering Conference Proceeding of the KSME, pp.348-351, 2009.
  4. J. S. Park, Y. G. Jang, J. D. Jang and I. S. Joo, "A Study on Charateristics and Durability for Lock-up Clutch Damper Spring of Torque Converter," Fall Conference Proceedings, KSAE, Vol.3, pp.1906-1911, 2006.
  5. J. Y. Oh, G. H. Lee and C. S. Song, "The Hydraulic System Modelling and Analysis of the Clutch Direct Control of an Automatic Transmission for a Forklift Truck," Journal of the Korean Society for Precision Engineering, Vol.26, No.1, pp.112-119, 2009.
  6. J. Swanson, Ansys 12.0, Ansys Inc, U.S.A, 2009.
  7. O. C. Shin, S. R. Jung, W. J. Chung, J. M. Kim and S. S. Park, "Development Portable Measurement System for Property Test of Manual Transmission Car," Multibody System Dynamics, Vol.11, pp.127-145, 2004.
  8. W. C. Park, S. C. Huh, J. W. Jung, H. W. Lee and M. H. Boo, "A Study on Fatigue Crack Behavior of Metal Matrix Composites for Automobile Engine," Transactions of KSAE, Vol.11, No.5, pp.140-146, 2003.