초록
최근에 활발히 진행된 ITS사업과 신호개선사업으로 인해 신호제어 시스템의 온라인화와 실시간 신호제어시스템이 도입되어 교통신호제어기의 첨단화가 진행되었다. 하지만 실시간 신호제어 운영변수 산정의 기초가 되고, 현재 가장 일반적으로 이용되는 신호교차로의 제어방법으로 사용되는 TOD제어의 운영을 위한 효과적인 신호시간계획을 위한 방법론이 부재되어 왔다. TOD 시간계획의 최적화를 수행하는 과정은 신호교차로의 효율성 제고를 위해 매우 중요한 작업이며, 최적화 수행과정의 정립이 필요한 실정이다. 본 연구에서는 TOD 시간계획 작성 시 가장 선행되어야 할 Sub Area 결정 방법과 첨두시와 비첨두시의 시간 경계를 결정하는 방법론에 대해서 정의하고, 각 방법론에 의해 결정된 시간경계 구간의 신호제어 변수를 신호최적화 모형을 통해 산출하였다. 최적화된 신호제어 변수의 효과를 분석하기 위해 서울시의 동2로 간선도로 구간에 새로운 TOD 시간계획을 적용하고 필드테스트를 수행하였으며, 이러한 TOD 시간계획의 적용 효과를 사전/사후 분석을 통해 검증하였다.
Traffic signal control is one of the most cost-effective means of improving urban mobility. With the recent progress of ITS (Intelligent Transportation System) and the installation of the real time traffic control systems, traffic signal control is conducted in online and real time. Normally, time-of-day (TOD) signal control is used with the system, but no definite methodology has yet been available for efficient TOD signal planing designing. Such method and process are in need to optimize the traffic signal timing plan. This paper proposes the optimization of TOD signal timings on arterials. The effects of the signal timings from the proposed method were assessed in the field. The proposed includes the methods determining the separation of the TOD break points and the TOD intervals. Those were tested on an arterial consisting of ten coordinated signalized intersections. It was found from the test results that the proposed TOD signal timing plans outperformed the previous signal timings.