참고문헌
- ASM International : ASM International, "Properties and Selection: Nonferrous Alloys and Special-Purpose Materials (10th Ed.)", 2 (1990) 142-143
- M.C. Flemings : Metall. Trans,, "Behavior of Metal Alloys in the Semisolid State", 22 (1991) 957-981 https://doi.org/10.1007/BF02661090
- Z. Fan : Int. Mater. Rev., Semisolid metal processing. 47 (2002) 49-85 https://doi.org/10.1179/095066001225001076
- M. Kiuchi and R. Kopp. : Ann. CIRP, "Mushy / Semi-Solid Metal Forming Technology - Present and Future", 51 (2002) 653-670 https://doi.org/10.1016/S0007-8506(07)61705-3
- Y.O. Yoon, D.I. Jang, H.H. Jo, Y.J. Kim and S.K. Kim : RARE METALS, "Effect of thixoextrusion parameters on mechanical properties of 7003 Aluminum wrought alloy", 25 (2006) 124-128
- M.A. Bayoumi, M.I. Negm and A.M. El-Gohry : Mater. Des., "Microstructure and mechanical properties of extruded Al-Si alloy (A356) in the semi-solid state", 30 (2009) 4469-4477 https://doi.org/10.1016/j.matdes.2008.11.025
- T.H. Kim, S.Y. Shim, H.W. Park and S.G. Lim : J. Kor. Foundrymen's Soc., "Optimum Fabrication Conditions and Reheating Characteristic of Semi-Solid Al-Zn-Mg-(Sc) Alloy by Inclined Cooling Plate", 29(5) (2009) 213-219
- F. Rikhtegar and M. Ketabchi : Mater. Des., "Investigation of mechanical properties of 7075 Al alloy formed by forward thixoextrusion process", 31 (2010) 3943-3948 https://doi.org/10.1016/j.matdes.2010.03.032
- S.Y. Shim, H.W. Park, I.S. Jeong and S.G. Lim : Sur. Rev. Lett., "THE OPTIMIZING CONDITIONS BY TAGUCHI METHOD FOR FABRICATING SEMI-SOLID AlZn Mg ALLOY SLURRY BY COOLING PLATE METHOD", 17 (2010) 185-188 https://doi.org/10.1142/S0218625X10013709
- H.V. Atkinson and D. Liu : Mater. Sci. Eng. A, "Microstructural coarsening of semi-solid aluminium alloys", 496 (2008) 439-446 https://doi.org/10.1016/j.msea.2008.06.013
- A. Ohno : Springer-Verlag, "Solidification-The separation theory and its practical application", (1987) 76
- L.Y. Piao and T. Motegi : J. Japan Inst. Light Met., "Solidified structure of a 5052 aluminum alloy obtained by semisolid casting", 55(2) (2005) 86-90 https://doi.org/10.2464/jilm.55.86
- D.H. Kim, Y.R. Sung, S.Y. Shim, S.Y. Lee, K.S. Kim and S.G. Lim : J. Kor. Foundrymen's Soc., "The Microstructures and Hot Extrudability of Semi-solid AM100A Magnesium Alloy Fabricated by Cooling Plate", 29(3) 2009 : 144-149
- Y. Birol : J. Mater. Process. Technol., "Cooling slope casting and thixoforming of hypereutectic A390 alloy", 207 (2008) 200-203 https://doi.org/10.1016/j.jmatprotec.2007.12.071
- K.S. Kim and S.G. Lim : J. Kor. Inst. Met. & Mater., "Microstructure of A356 Semi-Solid Metal Fabricated by Inclination Cooling Plate". 38(4) (2000) 529-533
- S.Y. Shim : Ph.D. Thesis. Gyeongsang National University. Korea, "Fabrication of Semi-Solid Al-Zn-Mg Alloy by Cooling Plate Method and Characteristics of its Thixo-extrudate", (2010) 39-52
- F. Tanabe, T. Motegi and E. Sugiura : J. Japan Inst. Light Met., "Semisolid continuous casting of 6070 and 7075 aluminum alloys using an inclined cooling plate", 53(7) (2003) 290-294 https://doi.org/10.2464/jilm.53.290
- M. Kiuchi and S. Sugiyama : J. Mater. Shaping Technol., "Application of Mashy State Extrusion", 8(1) (1990) 39-51 https://doi.org/10.1007/BF02834792
- E. Tzimas and A. Zavallangos : J. Mater. Sci., "Evaluation of volume fraction of solid in alloys formed by semisolid processing", 35 (2000) 5319-5329 https://doi.org/10.1023/A:1004890711322
- D. Liu, H.V. Atkinson and R.L. Higginson : Mater. Sci. Eng. A, "Disagglomeration in thixoformed wrought aluminium alloy 2014", 392 (2005) 73-83 https://doi.org/10.1016/j.msea.2004.09.028
- Y. Birol : J. Alloys Comp. "Solid fraction analysis with DSC in semi-solid metal processing", 486 (2009) 173-177 https://doi.org/10.1016/j.jallcom.2009.06.165
- S.J. Qu, A.H. Feng, L. Geng, Z.Y. Ma and J.C. Han : Scr. Mater., "DSC analysis of liquid volume fraction and compressive behavior of the semi-solid Si3N4w/Al-Si composite", 56 (2007) 951-954 https://doi.org/10.1016/j.scriptamat.2007.02.011
- D.A. Porter and K.E. Easterling : Champman & hall, "Phase Transformation in Metals and Alloys", (1991) 130-139
- H.W. Park, I.S. Jeong, Y.H. Kim and S.G. Lim : Proceedings of the 12th International Conference on Aluminium Alloys, "Effect of Ca Addition on Microstructure of Semi-Solid Al-Zn-Mg Al Alloys During Reheating", (2010) 1726-1729
- I.M. Lifshitz and V.V. Slyozov : J. Phys. Chem. Solids, "The kinetics of precipitation from supersaturated solid solutions", 19(1-2) (1961) 35-50 https://doi.org/10.1016/0022-3697(61)90054-3
- C. Wagner : Z. Elektrochem., "Theorie der Alterung von Niederschlagen durch Umlosen (Ostwald-Reifung)", 65 (1961) 581-591
- E. Tzimas and A. Zavaliangos : Mater. Sci. Eng. A, "Evolution of near-equiaxed microstructure in the semisolid state", 289 (2000) 228-240 https://doi.org/10.1016/S0921-5093(00)00908-4
- E.J. Zoqui, M.T. Shehata, M. Paes, V. Kao and E. Es-Sadiqi : Mater. Sci. Eng. A, "Morphological evolution of SSM A356 during partial remelting", 325 (2002) 38-53 https://doi.org/10.1016/S0921-5093(01)01401-0
- Q. Miao, L. Hu, X. Wang and E. Wang : J. Alloys Compd., "Grain growth kinetics of a fine-grained AZ31 magnesium alloy produced by hot rolling", 493(1-2) (2010) 87-90 https://doi.org/10.1016/j.jallcom.2009.12.049
- G.T. Bae, J.H. Bae, D.H. Kang, H.C. Lee and N.J. Kim : Met. Mater. Int., "Effect of Ca Addition on Microstructure of Twin-Roll Cast AZ31 Mg Alloy", 15 (2009) 1-5 https://doi.org/10.1007/s12540-009-0001-3
- G.E. Dieter : McGraw-Hill, "Mechanical Metallurgy", (1989)
- T.D. Massalski : ASM International, "Binary Alloy Phase Diagram (2nd. Ed.)", 1 (1990) 130
피인용 문헌
- A Study on Mechanical Characteristic of Hydrogen Charged Al-6.3Zn-2.4Mg Alloy vol.34, pp.2, 2014, https://doi.org/10.7777/jkfs.2014.34.2.054
- Ca첨가 반응고 AZ31 마그네슘 합금의 재가열에 따른 미세조직 변화 vol.32, pp.2, 2011, https://doi.org/10.7777/jkfs.2012.32.2.075
- (Mg + Al2Ca)로 개량된 AA7075 합금의 미세조직, 기계적 특성, 그리고 고주기 피로 특성에 미치는 T6 및 T73 열처리의 효과 vol.30, pp.1, 2011, https://doi.org/10.5228/kstp.2021.30.1.5