참고문헌
- Griffiths, H., Pugsley, A. and Saunders, O., 1968, Report of the Inquiry Into the Collapse of Flats at Ronan Point, Canning Town, Her Majesty’s Stationary Office, London, England.
- GSA, 2003, Progressive Collapse Analysis and Design Guidelines for New Federal Office Buildings and Major Modernization Projects, The U.S. General Services Administration.
- Unified Facilities Criteria(UFC)-DoD, 2005, Design of Buildings to Resist Progressive Collapse, Department of Defense.
- Breen, J. E., editor, 1976, Research Workshop on Progressive Collapse of Building Structures, Summary Report, HUD-PDR-182, Department of Housing and Urban Development, Washington, D.C.
- Leyendecker, E. V. and Ellingwood, B. R., 1977, Design Methods for Reducing the Risk of Progressive Collapse in Buildings, NBS Building Science Series 98, National Bureau of Standards, Washington, D.C.
- Kaewkulchai, G. and Williamson, E. B., 2003, Dynamic Behavior of Planar Frames during Progressive Collapse, 16th ASCE Engineering Mechanics Conference, pp. 1-12.
- Kim, J., Lee, S. J. and Choi, H. H., 2010, Progressive Collapse Resisting Capacity of Moment Frames with Viscous Dampers, Transactions of Computational Structural Engineering Institute of Korea, Vol. 23, No. 5, pp. 517-524.
- Min, K. W. and Joung, J. W., 2002, Modified Sliding Mode Control of Structures Using MR Dampers, Transactions of the Korean Society for Noise and Vibration Engineering, Vol. 12, No. 3, pp. 243-250. https://doi.org/10.5050/KSNVN.2002.12.3.243
- Park, E., Lee, S. K., Youn, K. J., Min, K. W., Chung, H. S., Lee, H. J., Choi, K. M., Moon, S. J. and Jung, H. J., 2008, Performance Evaluation of a Large-scale MR Damper for Controlling Seismic Responses Using a Real-time Hybrid Test Method, Transactions of the Korean Society for Noise and Vibration Engineering, Vol. 18, No. 1, pp. 131-138. https://doi.org/10.5050/KSNVN.2008.18.1.131
- Moon, B. W., Park, J. H., Lee, S. K. and Min, K. W., 2008, Equivalent Damping Ratio Based on Earthquake Characteristics of a SDOF Structure with an MR Damper, Transactions of the Korean Society for Noise and Vibration Engineering, Vol. 18, No. 1, pp. 87-93. https://doi.org/10.5050/KSNVN.2008.18.1.087
- Lee, S. H., Min, K. W. and Lee, M. K., 2005, Performance Evaluation of MR Damper using Equivalent Linearization Technique, Journal of the Earthquake Engineering Society of Korea, Vol. 9, No. 2, pp. 1-6. https://doi.org/10.5000/EESK.2005.9.2.001
- Stanway, R., Sproston, J. L. and Stevens, N. G., 1987, Non-linear Modeling of an Electro-rheological Vibration Damper, Journal of Electrostatics, Vol. 20, No. 2, pp. 167-184. https://doi.org/10.1016/0304-3886(87)90056-8
- Gamota, D. R. and Filisko, F. E. 1991, Dynamic Mechanical Studies of Electrorheological Materials, Vol. 35, No. 3, pp. 399-425. https://doi.org/10.1122/1.550221
- Wereley, N. M., Pang, L. and Kamath, G. M., 1998, Idealized Hysteresis Modeling of Electro-rheological and Magnetorehological Dampers, Journal of Intelligent Material Systems and Structures, Vol. 9, No. 8, pp. 642-649. https://doi.org/10.1177/1045389X9800900810
- Wen, Y. K., 1976, Method of Random Vibration of Hysteretic Systems, Journal of Engineering Mechanics Division, ASCE. Vol. 102, No. 2, pp. 249-263.
- Yoon, K. J., Min, K. W. and Lee, S. H., 2007, Seismic Response Control of Structures Using Decentralized Response-dependant MR Dampers, Transactions of Computational Structural Engineering Institute of Korea, Vol. 20, No. 6, pp. 761-767.