참고문헌
- 이주하, 양준모, 윤영수, "2방향 슬래브의 성능 향상을 위한 집중 배근된 FRP 바의 적용", 한국콘크리트학회 논문집, Vol.19, No. 6, 2007, pp.727-734.
- 한국콘크리트학회, 콘크리트 구조설계기준 해설, 한국콘크리트학회, 2007, p.523.
- ACI Committee 408, Bond and Development of Straight Reinforcing Bars in Tension, ACI 408R-03, American Concrete Institute, Farmington Hills, Mich., 2003, 49pp.
- Alexander, S. B. D. and Simmonds, S. H., "Test of Column-Flat Plate Connections", ACI Structural Journal, Vol. 89, No. 5, 1992, pp.495-577.
- American Concrete Institute(ACI), Building Code Requirements for Structural Concrete and Commentary, ACI 318-08 and ACI 318M-08, Farmington Hill, MI, 2008, p.473.
- American Concrete Institute(ACI), Guide for the Design and Construction of Structural Concrete Reinforced with FRP Bars, ACI 440.1R-06, Farmington Hill, MI, 2006, p.44.
- ASTM International, Standard Specification for Deformed and Plain, Low-Carbon, Chromium, Steel Bars for Concrete Reinforcement, ASTM A1035-07, West Conshohocken, PA, 2007, p.47.
- ASTM International, Standard Test Methods and Definitions for Mechanical Testing of Steel Products, ASTM A370-08, West Conshohocken, PA, 2008, 47pp.
- British Standard Institution(BSI), Structural Use of Concrete, Standard BS 8110, London, United Kingdom, 1997, p.168.
- Canadian Standards Association(CSA), Design of Concrete Structures, CSA A23.3-04, Mississauga, ON, Canada, 2004, p.249.
- Dilger, W., Birkle, G., Mitchell, D., "Effect of Flexural Reinforcement on Punching Shear Resistance", Punching Shear in Reinforced Concrete Slabs, SP-232, M. A. Polak, ed., American Concrete Institute, Farmington Hills, MI, 2005, pp.57-73.
- European Standard, Eurocode 2: Design of Concrete Structures-Part 1: General Rules and Rules for Buildings, prEN 1992-1-1, Final Draft, European Committee for Standardization, Brussels, 2003, p.226.
- Ghannoum, C. M., Effect of High-Strength Concrete on the Performance of Slab-Column Specimens, M. Engrg. Thesis, Dept. of Civil Engineering and Applied Mechanics, McGill Univ., Montreal, QC, Canada, 1998, p.91.
- Hassan, T. K., Seliem, H. M., Dwairi, H., Rizkalla, S. H. and Zia, P., "Shear Behavior of Large Concrete Beams Reinforced with High-Strength Steel," ACI Structural Journal, Vol. 105, No. 2, 2008, pp.173-179.
- Mast, R. F., Dawood, M., Rizkalla, S. H. and Zia, P., "Flexural Strength Design of Concrete Beams Reinforced with High-Strength Steel Bars," ACI Structural Journal, Vol. 105, No. 4, 2008, pp.570-577.
- McHarg, P. J., Cook, W. D., Mitchell, D. and Yoon, Y.-S., "Benefits of Concentrated Slab Reinforcement and Steel Fibers on Performance of Slab-Column Connections," ACI Structural Journal, Vol. 97, No. 2, 2000, pp.225-234.
- MMFX Technologies Corporation, MMFX Steel Product Guide, MMFX Technologies Corporation of America, Las Vegas, NV, 2007, p.73.
- Morgan, D. R., Mindess, S. and Chen, L., "Testing and specifying toughness for fiber reinforced concrete and shotcrete," Proc., 2nd Univ. - Industry Workshop on Fiber-Reinforced Concrete and Other Advanced Composites - Fiber-Reinforced Concrete - Modern Developments, N. Banthia and S. Mindess, ed., Toronto, 1995, pp.29-50.
- Regan, P. E., "Symmetric Punching of Reinforced Concrete Slabs," Magazine of Concrete Research, Vol. 38, No. 136, 1986, pp.115-128. https://doi.org/10.1680/macr.1986.38.136.115
- Seliem, H. M. A., Behavior of Concrete Bridges Reinforced with High-Performance Steel Reinforcing Bars, Ph.D Thesis, Dept. of Civil, Construction and Environmental Engineering, North Carolina State University, Raleigh, NC, 2007, p.259.
- Seliem, H. M., Hosny, A., Rizkalla, S., Zia, P., Briggs, M., Miller, S., Darwin, D., Browning, J., Glass, G. M., Hoyt, K., Donnelly, K. and Jirsa, J. O., "Bond Characteristics of ASTM A1035 Steel Reinforcing Bars," ACI Structural Journal, Vol. 106, No. 4, 2009, pp.530-539.
- Sumpter, M. S., Rizkalla, S. H. and Zia, P., "Behavior of High-Performance Steel as Shear Reinforcement for Concrete Beams," ACI Structural Journal, Vol. 106, No. 2, 2009, pp.171-177.
- Whitney, C. S., "Ultimate Shear Strength of Reinforced Concrete Flat Slabs, Footings, Beams and Frame Members without Shear Reinforcement," ACI Journal, Proceedings, Vol. 54, No. 4, 1957, pp.265-298.