과제정보
연구 과제 주관 기관 : 대전환경기술개발센터
참고문헌
- V. Stefanovski, E. Kosior, S. Masood, P. Lovenitt, and I..Sbarski, "Development of High Quality Recycled Polyethylene Resins for the Replacement of Virgin Resins in Pipe", ANTEC 2001, May (2001).
- 서희동, 김백선, 민병훈, 전호석, 김정호, "무기물 첨가에 의한 혼합폐플라스틱의 재활용에 관한 연구", J. Korea Solid Wastes Engineering Society, 20, 666 (2003).
- 계형산, 신경철, 방대석, "재생 폴리에틸렌/폐타이어 분말 충전 복합체 제조와 기계적 특성에 관한 연구", J. Korea Solid Wastes Engineering Society, 23, 294 (2006).
- 오수석, 방대석, 이종근, "모듈라 치합형 동방향회전 이축 스크류식 압출기를 이용한 폐 XLPE의 재활용", Elastomer, 39, 131 (2004).
- 계형산, "대전시 발생 폐프라스틱의 매설용 구조재로써의 재활용 연구", 대전 환경기술개발센터 2005 학술연구용역 (2005).
- 계형산, "폐프라스틱을 이용한 가로수보호의자 제작", 대전 환경기술개발센터 2006 학술연구용역 (2006).
- S. Sengupta, K. Pal, D. Ray, and A. Mukhopadhyay, "Furfuryl Palmitate Coated Fly Ash Used as Filler in Recycled Polypropylene Matrix Composites", Composites: Part B, 42, 1834 (2011). https://doi.org/10.1016/j.compositesb.2011.06.021
- M. Deepthi, V. Sharma, M. Sailja, R. R. N. Anantha, P. Sampathkumaran, and S. Seetharamu, "Mechanical and Thermal Characteristics of High Density Polyethylene Fly Ash Cenospheres Composites", Mater. Design, 31, 2051 (2010). https://doi.org/10.1016/j.matdes.2009.10.014
- I. Ahmad and P. Mahanwar, "Mechanical Properties of Fly Ash Filled High Density Polyethylene", J. Mater. Mater. Charac. Eng., 9, 183 (2010).
- J. Gu, G. Wu, and Q. Zhang, "Preparation and Damping Properties of Fly Ash Filled Epoxy Composites", Mater. Sci. Eng. A, 452, 614 (2007).
- S. Satapathy, A. Nag, and G. B. Nando, "Thermoplastic Elastomers from Waste Polyethylene and Reclaim Rubber Blends and Their Composites with Fly Ash", Process Safety Environmental Protection, 88, 131 (2010). https://doi.org/10.1016/j.psep.2009.12.001
- ISO 9080, "Plastics piping and ducting systems - Determination of the long-term hydrostatic strength of thermoplastics materials in pipe form by extrapolation" (2003).
- X. Lu, Z. Zhou, and N. Brown, "A Sensitive Mechanical Test for Slow Crack Growth in Polyethylene", Polym. Eng. Sci., 37, 1896 (1997). https://doi.org/10.1002/pen.11839
- X. Lu, Z. Zhou, and N. Brown, "The Anisotropy of Slow Crack Growth in Polyethylene", Polym. Eng. Sci., 34, 109 (1994). https://doi.org/10.1002/pen.760340206
- Y. Huang and N. Brown, "Dependence of Slow Crack Growth in Polyethylene on Butyl Branch Density: Morphology and Theory", J. Polym. Sci.,: Part B: Polym. Phy., 29, 129 (1991). https://doi.org/10.1002/polb.1991.090290116
- Y. Huang and N. Brown, "The Effect of Molecular Weight on Slow Crack Growth in Linear Polyethylene Homopolymer", J. Mater. Sci., 23, 3648 (1988). https://doi.org/10.1007/BF00540508
- Z. Zhou, X. Lu, and N. Brown, "The Effect of Blending High-Density and Linear Low-Density Polyethylene on Slow Crack Growth", Polymer, 34, 2520 (1993). https://doi.org/10.1016/0032-3861(93)90582-U
- ASTM F 2136, "Standard Test Method for Notched, Constant Ligament-Stress (NCLS) Test to Determine Slow-Crack- Growth Resistance of HDPE Resins or HDPE Corrugated Pipe" (2005).