참고문헌
- T. Nakano, 2001, Composition technique of sheet steel forming and cold forging, J. Jpn. Soc. Technol. Plast., Vol. 42, No. 481, pp. 22-26.
- P. B. Hussian, J. S. Cheon, D. Y. Kwak, S. Y. Kim, Y. T. Im, 2002, Simulation of clutch-hub forging process using CAMform, J. Mater. Process. Technol., Vol. 123, pp. 120-132. https://doi.org/10.1016/S0924-0136(02)00061-4
- H. C. Wu, T. Altan, 2004, Process optimization in stamping - a case study for flanging a clutch hub from steel plate, J. Mater. Process. Technol., Vol. 146, pp. 8-19. https://doi.org/10.1016/S0924-0136(03)00839-2
- J. M. Lee, B. M. Kim, C. G. Kang, 2006, A study on the cold ironing process for the drum clutch with inner gear shapes, Int. J. Mach. Tool. Manuf., Vol. 46, Issue. 6, pp. 640-650. https://doi.org/10.1016/j.ijmachtools.2005.07.027
- J. H. Park, S. G. Kim, J. H. Kang, Y. C. Park, S. H. Kim, S. R. Seo, K. H. Park, 2008, Preform design for manufacturing of automotive drum clutch hub products, J. Kor. Preci. Mech. Eng., Vol. 25, No. 12, pp. 33-38.
- M. H. Lee, H. Y. Kim, H. K. Kim, S. I. Oh, 2007, Forming Analysis for Warm Deep Drawing Process of Magnesium Alloy Sheet, Transactions of Materials Processing, Vol. 16, No. 5, pp. 401-405. https://doi.org/10.5228/KSPP.2007.16.5.401
- http://www.beire-kassel.de.
- D. H. Ko, D. C. Ko, Y. N. Kwon, S. W. Kim, H. S. Lee, E. S. Park, B. M. Kim, 2010, FE-simulation of hub clutch in vehicle transmission by roll die forming process, Annuals Spring Conf. of Kor. Soc. Tech. Plast., pp. 35-38.
피인용 문헌
- Prediction of Shearing Die Life for Producing a Retainer using FE Analysis vol.24, pp.4, 2015, https://doi.org/10.5228/KSTP.24.4.264
- Prediction of punch life in notching process for automatic transmission retainer considering fatigue and wear vol.29, pp.12, 2015, https://doi.org/10.1007/s12206-015-1140-8