References
- E. Doege, K. Droder, 2001, Sheet metal forming of magnesium wrought alloy formability and process technology, J. of Mat. Proc. Tech., Vol. 115, pp. 11-19.
- C. Bruni, A. Forcellese, F. Gabrielli, M. Simoncini, 2010, Effect of temperature, strain rate and fibre orientation on the plastic flow behavior and formability of AZ31 magnesium alloy, J. of Mat. Proc. Tech, Vol 210, pp. 1354-1363. https://doi.org/10.1016/j.jmatprotec.2010.03.025
- A. Wahab, E. Morsy, K. Manabe, Finite element analysis of magnesium AZ31 alloy sheet in warm deep-dreawing process considering heat transfer effect, Materials Letters, Vol. 60, pp. 1866-1870.
- S. C. Choi, H. Y. Kim, H. J. Kim, 2009, Prediction of the forming limit diagram for AZ31B sheet at elevated temperatures considering the strain-rate effect, Proc. Fall Conf. KSTP, pp. 235-238.
- H. Takuda, T. Morishita, T. Kinoshita, N. Shirakawa, 2005, Modelling of formula for flow stress of a magnesium alloy AZ31 sheet at elevated temperature, J. of Mat. Porc. Tech, Vol. 164-165, pp. 1258-1262. https://doi.org/10.1016/j.jmatprotec.2005.02.034
- M. G. Lee, T. Park, K. Chung, H. Y. Kim, H. J. Kim, 2010, Basic material properties and forming limit of AZ31B magnesium alloy sheet, Proc. Fall Conf. KSTP, pp. 290-293.
- ARGUS, GOM mbH., http://www.gom.com
- International Standard, ISO 12004-2:2008(E)
- ASTM International, 2002, Standard test method for determining forming limit curves, ASTM E2218-02, pp. 2-7.
- S. C. Choi, H. Y. Kim, S. M. Hong, Y. S. Shin, G. H. Lee, H. J. Kim, 2009, Evaluation and prediction of the forming limit of AZ31B magnesium alloy sheet in a cross-shaped cup deep drawing process, Met. Mater. Int, Vol. 15, No. 4, pp. 575-584. https://doi.org/10.1007/s12540-009-0575-9
- PAM-STAMP 2G 2009, ESI-GROUP
- H. K. Kim, W. R. Lee, S. K. Hong, J. D. Kim, B. K. Han, 2006, Finite-element analysis of warm square cup deep drawing process of magnesium alloy AZ31 Sheet, KSTP, Vol. 15, No. 3, pp. 232-240. https://doi.org/10.5228/KSPP.2006.15.3.232
- M. H. Lee, H. Y. Kim, H. J. Kim, H. K. Kim, S. I. Oh, 2007, Forming analysis for warm deep drawing process of magnesium alloy sheet, KSTP, Vol. 16, No. 5, pp. 401-405. https://doi.org/10.5228/KSPP.2007.16.5.401
Cited by
- Development of Automotive Dash Panel Parts Using Warm Drawing of Magnesium Alloy AZ31B vol.24, pp.4, 2015, https://doi.org/10.5228/KSTP.24.4.248
- A Study on Warm Forming Technology of Car Body Reinforced Dash Using Magnesium Alloy Sheet vol.23, pp.5, 2014, https://doi.org/10.7735/ksmte.2014.23.5.519
- Development of warm forming parts for automotive body dash panel using AZ31B magnesium alloy sheets vol.16, pp.10, 2015, https://doi.org/10.1007/s12541-015-0278-8
- A Study on the Mechanical Properties and Formability of Mg AZ31B Sheet vol.23, pp.8, 2014, https://doi.org/10.5228/KSTP.2014.23.8.495