Abstract
This paper presents the design of the power-assisted controller for the in-wheel type smart wheelchair by using torque estimation that is predicted by relationship between input voltage and output wheel angular velocity. Nowadays, interest of the moving assistant aids is increased according to the increase in population of the elderly and the handicapped person. However some of the moving assistant aids have problems. For example, manual wheelchair has difficulty moving at the slope, because users lack the muscular strength of their arm. In electric wheelchair case, users should be weak by being decreased muscles of upper body. To overcome these problems, power-assisted electric wheelchair are proposed. Most of the power-assisted electric wheelchair have the special rims that can measure the user's power. In here, the rims have to be designed to install the sensors to measure user's power. In this paper, we don't design the rim to measure the man power. To predict the man power, we propose a control algorithm of the in-wheeled electric wheelchair by using torque estimation from the wheel. First, we measure the wheel velocity and voltage at the in-wheel electric wheelchair. And then we extract driving will forces by using proposed mathematical model. Also they are applied at the controller as the control input, we verify to be able to control in-wheel type smart wheelchair by using simulation.
본 논문은 인휠형 휠체어에 있어 휠 림에 걸리는 외력을 차량의 전압과 회전 속도를 통해 예측하고 이를 통해 각 바퀴에 사용자의 힘에 따라 차량의 방향 및 속도를 제어할 수 있도록 고안된 제어기 설계에 관한 논문이다. 최근 노인 인구의 증가로 인해 노인 및 장애인을 위한 이동기기에 대한 관심이 증가되고 있다. 특히 많은 수의 고령자들이 휠체어를 이용하고 있다. 하지만 고령자의 경우 수동 휠체어 사용 시 국내 지형상의 문제로 인해 구동에 어려움을 겪는다. 또한 전동 휠체어의 경우 조이스틱으로 구동하므로 하체 근력 약화로 인해 휠체어를 이용하는 고령자의 경우, 상체 근력 또한 약화될 수 있다. 이를 극복하기 위해 림(rim)에 힘이 가해지는 힘의 크기를 파악하여 이에 상응하는 모터를 구동시키는 힘 보조형 인휠 전동기에 대한 연구가 진행되고 있다. 하지만 대부분의 힘 보조형 인휠 전동기의 경우 힘의 크기를 측정하기 위한 센서 모듈이 장착되어야 하며 이를 위해 힘의 크기를 측정하기 위한 별도의 림을 설계해야 하는 등 기구적 장치가 요구된다. 이에 본 논문에서는 이러한 힘의 크기를 측정하기 위한 림 설계 대신에 모터의 수학적 모델을 기초로 모터에 전달되는 전압과 바퀴의 현재 속도를 토대로 인휠형 모터에 걸리는 외력을 추정하고 이를 토대로 사용자의 이동 속도와 방향을 추정하여 모터를 이동시킬 수 있도록 하였다. 본 논문은 제안된 수학적 모델을 기초로 사용자의 구동 의지력을 정확하게 측정할 있었다. 또한 이를 기초로 한 제어기를 적용할 경우 인휠 휠체어를 사용자의 의지에 따라 이동할 수 있음을 시뮬레이션을 통해 검증하였다.