DOI QR코드

DOI QR Code

Development of an Illumination Measurement Device for Color Distribution Based on a CIE 1931 XYZ Sensor

  • Son, Do-Ky (Department of Electronic Engineering, Chosun University) ;
  • Cho, Eun-Byeol (Department of Electronic Engineering, Chosun University) ;
  • Moon, In-Kyu (School of Computer Engineering, Chosun University) ;
  • Park, You-Sang (Bioptech Ltd., Business Incubation Center, Chosun University) ;
  • Lee, Chung-Ghiu (Department of Electronic Engineering, Chosun University)
  • 투고 : 2010.08.31
  • 심사 : 2011.01.12
  • 발행 : 2011.03.25

초록

In this paper, an easy-to-use measurement device for illumination distribution is developed. The device consists of a sensor array module, a control module, and a PC interface. The sensor array module incorporates CIE 1931 color sensors and the ARM-based 96 MHz microcontroller in the control module for measurement and data processing. The sensor array module contains 64 color sensors arranged in a $16{\times}4$ array. The sensitivity of the sensor array module can be adjusted depending on the illumination level to be measured. The measurement data and control signals are exchanged via USB 2.0 standard. To demonstrate the performance of the device, the illumination distribution is measured for colors of red, green, and blue and is graphically shown. The device can be used for measurement of the illumination distribution, design and adjustment of LED illumination.

키워드

참고문헌

  1. E. F. Schubert, Light-emitting Diodes (Cambridge UniversityPress, Cambridge, UK, 2003), Chapter 8.
  2. H.-Y. Ryu and D.-H. Kim, “High-brightness phosphor-conversionwhite light source using InGaN blue laser diode,” J. Opt.Soc. Korea 14, 415-419 (2010). https://doi.org/10.3807/JOSK.2010.14.4.415
  3. A. Zukauskas, M. S. Shur, and R. Caska, Introduction toSolid-state Lighting (John Wiley & Sons, New York, USA,2002), Chapter 7.
  4. S. P. Ying, C.-W. Tang, and B.-J. Huang, “CharacterizingLEDs for mixture of colored LED light sources,” in Proc.2006 EMAP International Conference on Electronic Materialsand Packaging (Kowloon, Hong Kong, Dec. 2006), pp. 1-5. https://doi.org/10.1109/EMAP.2006.4430677
  5. S. Muthu and G. James, “Red, green and blue LED-basedwhite light source: implementation challenges and controldesign,” in Proc. Conference Record of the IAS AnnualMeeting (Salt Lake City, USA, Oct. 2003), pp. 515-522. https://doi.org/10.1109/IAS.2003.1257549
  6. J. J. Carr, Sensors and Circuit (Prentice Hall, New Jersey,USA, 1993).
  7. Y. Tanaka, T. Komine, S. Haruyama, and M. Nakagawa, “Indoorvisible light data transmission system utilizing white LEDlights,” IEICE Trans. on Commun. E86-B, 2440-2454 (2003).
  8. I. Moreno, M. Avedano-Alejo, and R. I. Tzonchev, “Designinglight-emitting diode arrays for uniform near-field irradiance,”Appl. Opt. 45, 2265-2272 (2006). https://doi.org/10.1364/AO.45.002265
  9. I. Moreno, C.-C. Sun, and R. Ivanov, “Far-field conditionfor light-emitting diode arrays,” Appl. Opt. 48, 1190-1197(2009). https://doi.org/10.1364/AO.48.001190
  10. A. J.-W. Whang, Y.-Y. Chen, and Y.-T. Teng, “Designinguniform illumination systems by surface-tailored lens andconfigurations of LED arrays,” Journal of Display Technol.5, 94-103 (2009). https://doi.org/10.1109/JDT.2008.2001865
  11. J. H. Lee, W. Chang, and D. Choi, “LED light couplerdesign for a ultra thin light guide,” J. Opt. Soc. Korea 11,113-117 (2007). https://doi.org/10.3807/JOSK.2007.11.3.113
  12. P. K. Yang, J. C. Chen, and Y. H. Chuang, “Improvementon reflective color measurement using a tri-color LED bymulti-point calibration,” Opt. Comm. 272, 320-324 (2007). https://doi.org/10.1016/j.optcom.2006.11.051
  13. K. Liang, W. Li, H. R. Ren, X. L. Liu, W. J. Wang, R.Yang, and D. J. Han, “Color measurement for RGB whiteLEDs in solid-state lighting using a BDJ photodetector,”Displays 30, 107-113 (2009). https://doi.org/10.1016/j.displa.2009.03.002
  14. J.-B. Cheng, Q. Jiang, and J.-J. Li, “Chromatic propertymeasurement system for LED,” Proc. SPIE 5941, 59411J(2005). https://doi.org/10.1117/12.613663
  15. LiteMate (http://www.photoresearch.com).
  16. Data Sheet of MTCS-TIAM2, “Integral true color sensor IC,” (2010).
  17. CIE-1931 (http://en.wikipedia.org/wiki/CIE_1931_color_space).
  18. C. DeCusatis, ed., Handbook of Applied Photometry (AIPPress, New York, USA, 1998).
  19. ARM Microcontroller (http://www.arm.com/products/processors/index.php, http://www.st.com/mcu/index.html).
  20. Ethernet (http://www.altera.com/products/ip/iup/ethernet/mmtip-10_100_ethermac.html).
  21. USB (http:// www.beyondlogic.org/usbnutshell/usb-in-anutshell.pdf).
  22. J. Travis, LabVIEW for Everyone: Graphical ProgrammingMade Even Easier (Prentice-Hall, Upper Saddle River, USA,1996), Chapter 11.
  23. Color Depth (http://en.wikipedia.org/wiki/12_bit_color).

피인용 문헌

  1. Performance of CSK Scheme for V2I Visible Light Communication vol.40, pp.3, 2015, https://doi.org/10.7840/kics.2015.40.3.595
  2. Analysis on the Luminous Efficiency of Phosphor-Conversion White Light-Emitting Diode vol.17, pp.1, 2013, https://doi.org/10.3807/JOSK.2013.17.1.022
  3. Multi-coded Variable PPM for High Data Rate Visible Light Communications vol.16, pp.2, 2012, https://doi.org/10.3807/JOSK.2012.16.2.107
  4. Quadrichromatic LED based mobile phone camera visible light communication vol.26, pp.13, 2018, https://doi.org/10.1364/OE.26.017132