참고문헌
- Kim, K. W., Baek, S. W.,Shin, B. S., Kil, K. J. and Yeo,K. G., 2005, “Comparison of Regularization Techniquesfor an Inverse Radiation Boundary Analysis,” Tran.KSME(B), Vol. 29, No. 8, pp. 903-910. https://doi.org/10.3795/KSME-B.2005.29.8.903
- Hong, Y. K. and Baek, S. W., 2004, “Inverse Analysisfor Estimating the Unsteady Inlet Temperature Distributionfor Two-Phase Laminar Flow in a Channel,” Tran.KSME(B), Vol. 28, No. 9, pp. 1124-1132.
- Lee, K. H., Baek, S. W. and Kim, K. W., 2008,“Inverse Radiation Analysis using Repulsive ParticleSwarm Optimization Algorithm,” International Journalof Heat and Mass Transfer 51, pp. 2772-2783. https://doi.org/10.1016/j.ijheatmasstransfer.2007.09.037
- Lautenberger, C., 2007, “Generalized pyrolysis modelfor combustible solids,” Doctoral thesis, University ofCalifornia, Berkeley.
- Chang, H. C., Park, W. H., Lee, D. H., Jung, W. S.,Son, B. S and Kim, T. K., 2010, “Estimation of FireDynamics Properties for Charring Material Using aGenetic Algorithm,” Korean Institute of Fire Science &Engineering, Vol. 24, No. 2, pp. 106-113.
- Matala, A., 2008, “Estimation of solid phase reactionparameters for fire simulation,” Master thesis, HelsinkiUniversity of Technology.
- Lautenberger, C., Rein, G. and Fernadez-Pello, C., 2006,“The application of a genetic algorithm to estimatematerial properties for fire modeling from bench-scalefire test data,” Fire Safety Journal 41, pp. 204-214. https://doi.org/10.1016/j.firesaf.2005.12.004
- Lautenberger, C., 2008, “Gpyro-A Generalized PyrolysisModel for Combustible Solids Users’ Guide(Version0.650),” University of California, Berkeley.
- Kim, E., Lautenberger, C. and Dembsey, N., 2009,“Property estimation for pyrolysis modeling applied topolyester FRP composites with different glass contents,” Fire and Material.
- Chang, H. C., Park, W. H., Lee, D. H., Jung, W. S.,Son, B. S and Kim, T. K., 2010, “Estimation of FireDynamics Properties for Charring Material Using aGenetic Algorithm,” Korean Institute of Fire Science &Engineering, Vol. 24, No. 2, pp. 106-113.
- Mishra, S. K,. 2006, “Repulsive particle swarm methodon some difficult test problems of global optimization,”Munich personal repec archive.
- Atrdya, A., 1983, “Pyrolysis, ignition, and fire spreadon horizontal surfaces of wood,” Cambridge, MA,Harvard University. Ph.D.
- McGrattan, K. B., Forney, G. P., Floyd, J. E., Hostikka,S. and Prasad, K., 2004, “Fire dynamics simulator(version 4)-user’s guide,” National Institute ofStandards and Technology, NISTIR 6784.
- Ritchie, S. J., Steckler, K. D., Hamins, A., Cleary, T.G., Yang, J. C. and Kashiwagi, T., 1997, “The effect ofsample size on the heat release rate of charringmaterials,” Fire safety science-Proceedings of the fifth international symposium. International Association for Fire Safety Science, pp. 177-188.
- Chang, H. C., Park, W. H., Lee, D. H., Jung, W. S.,Kim, T. K., 2009, “Study on pyrolysis reaction characteristicsand sensitivity analysis of solid fuel,” KSME/JMSTTHERMAL and FLUID Engineering Conference, pp.508-511.
- Y. Wu, 2006, “Global logistics road planning: a geneticalgorithm approach”, ISORA’06, pp. 75-81
- Michalewicz, Z., 1995, “Genetic algorithms+data= evolutionprograms,” New York, Springer.
- Jin, G. G., 2000, “Genetic algorithms and theirapplications,” kyowoo publishing.
- Holland, J., 1975, “Adaptation in Natural and ArtificialSystem,” University of Michigan Press, Ann Arbor.
- Kennedy. J., Eberhart, R. C., 1995, “Particle swarmoptimization,” in: Proceedings of the 1995 InternationalConference on Neural Networks, vol. 4, IEEE Press,Piscataway, NJ, pp. 1942-1948. https://doi.org/10.1109/ICNN.1995.488968
피인용 문헌
- Estimation of convection heat transfer coefficient and surface emissivity of a nonreacting specimen in cone calorimeter using RPSO method vol.27, pp.6, 2013, https://doi.org/10.1007/s12206-013-0402-6
- Study on inverse estimation of radiative reflection properties in mid-wavelength infrared region by using the repulsive particle swarm optimization algorithm vol.52, pp.22, 2013, https://doi.org/10.1364/AO.52.005533
- Estimation of Flame Heat Flux and Surface Emissiviy of Railway Vehicle Flooring by Using Optimization Method vol.14, pp.3, 2014, https://doi.org/10.9798/KOSHAM.2014.14.3.263