References
- 김택곤(1999),"원심모형실험 및 수치해석에 의한 사질토 지반내 터널복공의 역학적 거동에 관한 연구", 박사학위논문, 서울대학교, pp.48-52
- Allersma H. O. B., Kirstein A. A., Brinkgreve R. B. J. and Simon T. (1999), "Centrifuge and Numerical Modelling of Horizontally Loaded Suction Piles", 9th Int Offihore and Polar Eng Conf & Exhibition, Brest, France, Vol.1, pp. 711-717.
- Allersma H. O. B., Brinkgreve R. B. J. and Simon T. (2000), "Centrifuge and Numerical Modeling of Horizontally Loaded Suction Piles", International Journal of Offihore and Polar Engineering, Vol.10, No.3, pp.222-228.
- Aubeny, C. P., Han, S. W., and Murff, J. D. (2003), "Inclined load capacity of suction caissons", Int. J. for Numerical and Analytical Methods in Geomechnics, Vol.27, pp.1235-1254. https://doi.org/10.1002/nag.319
- Bang, S., and Cho, Y. (1999), "Analytical Performance Study of Suction Piles in Sand", 9th Int Offihore and Polar Eng Conf & Exhibition, Brest, France, Vol.1, pp.90-93.
- Bang, S., and Cho, Y. (2002), "Ultimate Horizontal Loading Capacity of Suction Piles", Int Journal of Offihore and Polar Eng, Vol.12, pp.56-63.
- Bang, S., Jones, K. D., Kim K. O., Kim, Y. S., and Cho, Y., (2011), "Inclined Loading Capacity of Suction Piles in Sand," Journal of Ocean Engineering, Vol.38, Issue.7, pp.915-924. https://doi.org/10.1016/j.oceaneng.2010.10.019
- Cho. Y., and Bang. S. (2002), "Inclined Loading Capacity of Suction Piles", 12th Int. Offihore and Polar Eng Conf & Exhibition, Kitakyushu, Japan, pp.827-832.
- Cho I. H., Kwag D. J., Bang, S., and Cho, Y. (2008), "Use of Suction Piles for Temporary Mooring of Immersed Tunnel Elements", 18th Int. Offihore and Polar Eng Conf & Exhibition, Vancouver, BC, Canada, pp.665-669.
- Cho. Y. (2001), "Calibration of Installation, Analytical Performance Study, and Analytical Solution of Loading Capacity of Suction Piles", PhD, South Dakota School of Mines and Technology, pp.173-267.
- Cho, Y.,. Bang, S. and Preber, T. (2002), "Transition of Soil Friction During Suction Pile Installation", Canadian Geotechnical Journal, Vol.39, No.5, pp.1118-1125. https://doi.org/10.1139/t02-054
- Katagiri, M., Deno K., and Takemura, J. (1998), "Report of cooperative test on method for preparation of sand samples", Centrifuge 98, Vol.2, Tokyo, Japan, pp.1095-1108.
- Kim. Y., Kim. K., Cho. Y. and Bang. S. (2010), "Centrifuge Model Tests on Suction Pile Pullout Loading Capacity in Sand", Int. Conf. on Pysical Modelling in Geomechanics, pp.787-792.
- Park J. B., Park C. L., Kim S. W., Jeong H. 1., Kim Y. S., Kim S. J. and Kim Y. G. (1998), "Geotechnical Centrifuge Facility at Daewoo Institute of Construction Technology", Centrifoge 98, Tokyo, Japan, pp.9-12.
- Randolph, M. F., and Houlsby, G. T. (1984), "The limiting pressure on a circular pile loaded laterally in cohesive soil", Geotechnique, Vol.34, No.4, pp.613-623. https://doi.org/10.1680/geot.1984.34.4.613
- Randolph, M. F., Cassidy, M. 1., Gourvenec, S. and Erbrich, C. J. (2005), "Challenges of Offshore Geotechnical Engineering", State of the Art Paper, 16th ICSMGE, Osaka, Japan, 1:123-176. Rotterdam: Balkema.
- Supachawarote c., Randolph, M. F .. , and Gourvenec S. (2004), "Inclined Pull-out Capacity of Suction Caissons", 14th Int. Offshore and Polar Eng Conf & Exhibition, Toulin, France, pp.500-506.
Cited by
- A Study on Rock Mass Classifications and Tunnel Support Systems in Unconsolidated Sedimentary Rock vol.9, pp.4, 2017, https://doi.org/10.3390/su9040573
- 석션파일의 조합하중 지지력 및 압밀거동에 관한 수치해석 연구 vol.30, pp.1, 2014, https://doi.org/10.7843/kgs.2014.30.1.103
- 3차원 수치해석을 이용한 점토지반에 설치된 석션파일 인발 시 발현되는 전단응력에 관한 연구 vol.15, pp.2, 2011, https://doi.org/10.14481/jkges.2014.15.2.59
- 모래지반에 설치된 병렬식 그룹석션앵커의 인발하중에 대한 수치해석 연구 vol.30, pp.11, 2014, https://doi.org/10.7843/kgs.2014.30.11.61