Study on the Dynamic Response Characteristics of Impact Force Sensors Based on the Strain Gage Measurement Principle

변형률 게이지 측정원리를 이용한 충격하중 측정 센서의 동적응답 특성에 관한 연구

  • 안중량 (전북대학교 자원.에너지공학과) ;
  • 김승곤 (전북대학교 자원.에너지공학과) ;
  • 성낙훈 (한국지질자원연구원) ;
  • 송영수 (전북대학교 자원.에너지공학과) ;
  • 조상호 (전북대학교 자원.에너지공학과)
  • Received : 2011.06.19
  • Accepted : 2011.06.27
  • Published : 2011.06.30

Abstract

In order to estimate blast damage zone and control rock fragmentation in blasting, it is important to obtain information regarding blast hole pressure. In this study, drop impact tests of acrylic, aluminium, steel sensors were performed to investigate the dynamic response characterizations of the sensors through the strain signals. As a result, the strain signals obtained from the steel sensors showed less sensitivity to impact force level and experienced small changes with various length of the sensors. The steel sensors were applied to measure the impact force of an electric detonator.

발파에 의한 암반손상영역을 평가하고 암반 파쇄도를 제어하기 위해서는 장약실 내 발생하는 폭발압력에 관한 정보는 중요하다. 이를 위하여 본 연구에서는 철, 알루미늄, 아크릴 재질의 센서에 대한 낙추 충격 시험으로부터 동적 변형률 신호를 측정하여 센서의 동적 응답 특성을 분석하였다. 철재 센서의 경우 충격하중에 가장 적은 변형률 출력 값을 보였으며 센서길이에 대한 출력 값의 변화는 적게 나타났다. 철제 센서를 뇌관의 충격하중 측정에 적용하였다.

Keywords

References

  1. 조상호, 양형식, 가네꼬카츠히꼬, 2004, SB발파에서 지발뇌관의 기폭초시오차가 암반파괴과정에 미치는 영향, 터널과 지하공간, Vol. 14, No. 2, pp. 457-464.
  2. Fujikake, K., Y. Shinozaki, T. Ohno, J. Mizuno and A. Suzuki, 1999, Post-peak and strain-softening behaviors of concrete materials in compression under rapid loading, Japan Society of Civil Engineers, pp. 627-44.
  3. Matsuo, H. and Y. Nakamura, 1980, Experiments on cylindrically converging blast waves in atmospheric air. American Institute of Physics, pp. 47-52.
  4. Munjiza, A., 1992, Discrete elements in transient dynamics of fractured media. Ph.D. Thesis, University of Wales, University College of Swansea, Wales, UK.
  5. Osaka, H., M. Fujita, K. Hanasaki and Y. Fujinaka, 1991, The effect of pressure wave control in the underwater explosive forming. Journal of The Industrial Explosives Society, 52-1, pp. 41-50.