Journal of the Korean Society for Aeronautical & Space Sciences (한국항공우주학회지)

The Korean Society for Aeronautical and Space Sciences (한국항공우주학회)
권호 표지
DOI QR코드

DOI QR Code

Free Vibration Characteristics of the Rectangular Plates under Uniform Thermal Loading Part I. Analytic and FEM analysis

균일 열부가 하중을 받는 사각판의 자유 진동특성 연구 Part I. 이론 및 유한요소 해석

  • Received : 2010.11.23
  • Accepted : 2011.01.12
  • Published : 2011.02.01
Download PDF
⟨ Previous Next ⟩

Abstract

This paper was conducted on analytical solution using superposition and FEM analysis in the free vibration analysis of rectangular plates under uniform thermal loadings. Materials of three rectangular plates were aluminum, steel and stainless-steel respectively. Applied temperature conditions were from room temperature to $300^{\circ}C$ and boundary condition was free-free condition. Fully symmetric mode(FSM), fully antisymmetric mode(FASM) and symmetric-antisymmetric mode(SAM) were analyzed.

본 논문에서는 균일 열부가 하중을 받는 사각판의 자유 진동특성을 중첩법에 의한 수치해석과 유한요소 해석을 통하여 연구하였다. 사각판의 재질은 알루미늄, 강재 및 스테인레스강 이다. 부가한 온도 조건은 상온에서부터 $300^{\circ}C$까지 부가하였고, 경계조건은 자유-자유 조건이다. 완전 대칭 모드, 완전 역대칭 모드 및 대칭-역대칭 모드에 대한 해석이 수행되었다.

Keywords

References

  1. L. Meirovitch, " Elements of Vibration Analysis", McGraw-Hill, Inc., New York, NY, 1975.
  2. B. A. Boley, " Thermally Induced Vibration of Beam", Journal of Aeronautical Scieces. Vol. 23, pp. 179-181, 1956.
  3. B. A. Boley, and J. H. Weiner, " Theory of Thermal Stresses", John Wiley and Sons, Inc, pp. 3-355, 1960.
  4. E. A. Thornton, and Y. A. Kim, " Thermally Induced Bending Vibrations of Flexible Rolled-up Solar Array", Journal of Spacecraft Rockets, Vol. 30, No. 4, pp. 438-448, 1993. https://doi.org/10.2514/3.25550
  5. E. A. Thornton, G. P. Chin, and D. W. Gulick, "Thermally Induced Vibrations of a Self-shadowed Split-blanket Sollar Array", AIAA-94-1379, 1994.
  6. R. S. Foster, and E. A. Thornton, " An Experimental Investigation of Thermally Induced Vibrations of Spaceraft Structures", AIAA-94-1380, 1994.
  7. N. Ganesan, " Vibration of Heated Plates with Two Opposite Edges Simply Supported," Journal of Sound and Vibration, Vol.66, No.1, pp. 99-107, 1979 https://doi.org/10.1016/0022-460X(79)90605-9
  8. J. E. Locke, " Vibrartion Analysis of Heated Anisotropic Plates with Free Edge Condition", Journal of Aircraft, Vol. 31, No. 3, pp. 696-702, 1994. https://doi.org/10.2514/3.46550
  9. J. Avsec and M. Oblak " Thermal Vibration Analysis for Simply Supported Beam and Clamped Beam", Journal of Sound and Vibration, Vol. 308, pp. 514-525, 2007. https://doi.org/10.1016/j.jsv.2007.04.002
  10. D. J. Mead, "Vibration and Buckling of Flat Free-free Plates under Non-uniform Inplane Thermal Stress", Journal of Sound and Vibration, Vol. 260, pp. 141-165, 2003. https://doi.org/10.1016/S0022-460X(02)00919-7
  11. 윤일성, 송오섭, “ 위성체 유연 구조물의 열 진동 해석”, 한국항공우주학회지, Vol. 30, no. 1, pp. 56-64, 2002.
  12. 공창덕, 오경원, Y. Sugiyama , " 유연 우주구조물의 열적 유기 진동에 관한 연구“, 한국항공우주학회지, Vol. 31, No. 9, pp. 46-54, 2003. https://doi.org/10.5139/JKSAS.2003.31.9.046
  13. D. J. Gorman, " Free Vibration Analysis of the Completely Free Rectangular Plate by the Method of Superposition", Journal of Sound and Vibration., Vol. 57, No. 3, pp. 437-447, 1978. https://doi.org/10.1016/0022-460X(78)90322-X
  14. Dassautt System Simlulia Corp., "ABAQUS/Standard User's Manual", 2008
  15. G. H. Golub, and C. F. Van Loan, "Matrix Computations", The Johns Hopkins University Press, Baltimore, Md., USA, 1983.
  16. Department of Defence Handbook. "Metallic Materials and Elements for Aerospace Vehicle Structures", MIL-HDBK-5J Superseding MIL-HDBK-5H, 2008.
  17. A. W. Leissa. "The Free Vibration of Rectangular Plates", Journal of Sound and Vibration., Vol. 31, pp. 257-293, 1973. https://doi.org/10.1016/S0022-460X(73)80371-2