Journal of Institute of Control, Robotics and Systems (제어로봇시스템학회논문지)

Institute of Control, Robotics and Systems (제어로봇시스템학회)
권호 표지
DOI QR코드

DOI QR Code

A Performance Testing Device of Drycell

건전지의 성능평가 장치

  • 정헌 (초당대학교 소방행정학과)
  • Received : 2010.10.26
  • Accepted : 2011.01.13
  • Published : 2011.02.01
Download PDF
⟨ Previous Next ⟩

Abstract

In this paper, I have developed a high-speed and high-resolution measuring device in order to check the performance of drycell. The system is developed for the drycell manufacturing plant. Measuring time is one of key factors to inference on the production speed. So the developed system is designed to generate the classified result up to 1200ea/min. In the other words, each product can be classified within 25ms. There have been many studies to estimate both state of charge as well as state of health, such as OCV (Open Circuit Voltage), SC (Short Circuit) and measuring impedance with frequency pulse. But those methods take a few second due to surface discharge. To overcome the phenomenon, I developed the method to engage the reverse current to two electrodes of battery. As a result, I could achieve to measure the indigenous capacity without the problem of surface discharge.

Keywords

References

  1. “New Technology Batteries Guide,” Office of Science and Technology American National Institute of Justice, March 1997.
  2. T. F. Fuller, M. Doyle, and J. Newman, “Simulation and optimization of the dual lithium ion insertion cell,” Journal of Electrochem. Soc., vol. 141, no. 4, pp. 1-10, Apr. 1994. https://doi.org/10.1149/1.2054684
  3. D. Panigrahi, C. F. Chiasserini, S. Dey, R. R. Rao, A. Raghunathan, and K. Lahiri, “Battery life estimation for mobile embedded systems,” Proc. Int. Conf. VLSI Design, pp. 55-63, Jan. 2001.
  4. F. Simjee and P. H. Chou, “Accurate battery lifetime estimation using high-frequency power profile emulation,” in Proc. of International Symposium on Low Power Electronics and Design (ISLPED), San Diego, CA, pp. 307-310, Aug. 2005.
  5. A. Fasih, “Modeling and fault diagnosis of automotive lead-acid batteries,” Undergraduate Honors Thesis. The Ohio State University. 2006.
  6. “Energizer Cylindrical Alkaline Application Manual,” Eveready Battery Co. Inc., 2001.
  7. “Product Datasheet ENERGIZER E95,” Energizer Holdings, Inc.
  8. P. H. Chou, C. S. Park, J. Park, K. Pham, and J. Liu, “A battery emulator and power profiling instrument,” Proceedings of the 2003 international symposium on Low power electronics and design, Seoul, Korea, Aug. 2003.