References
- D.A. Gerber: Evaluation of Environmental Fatigue Effects for a Westinghouse Nuclear Power Plant, EPRI TR-110043, 1998
- M. Higuchi: Effect of Strain Holding and Continuously Changing Strain Rate on Fatigue Life Reduction of Structural Materials in Simulated LWR water, PVP2007-26101, 2007
- Y.S. Garud, et.al.: Corrosion Fatigue of Water-Touched Pressure Retaining Components in Power Plants, EPRI TR-106696 , 1997
- O.K. Chopra: Effects of LWR Coolant Environments on Fatigue Design Curves of Fatigues of Austenitic Stainless Steels, NUREG/CR-5704, 1999
- I.S. Jeong, G.H. Ha, T.R. Kim, H.I. Jeon and Y.S. Kim: Effect of Strain Rate 0.04 to 0.004%/s on Environmental Fatigue of CF8M Stainless Steel, Transactions of the Korean Nuclear Society, Spring Meeting, Jeju, Korea, May 2009
- Standard Practice for Strain-Controlled Fatigue Testing, ASTM E 606-92, pp. 523-537, 1993
-
P.Y. Cho, H. Jang, I.S. Jeong and C.H. Jang: Environmental Behavior of Wrought and Cast Stainless Steels in
$310^{\circ}C$ Deoxygenated Water, ICAP '09, Paper 9407, Tokyo, Japan, 2009 - I.S. Jeong, G.H. Ha and T.R. Kim: Environmental Fatigue Test of CF8M with a Small Autoclave Simulating PWR Conditions, ASME PVP2008-61673, Chicago, Illinois, US, 2008,
- O.K. Chopra and W. J. Shack: Effect of LWR Coolant Environments on the Fatigue Life of Reactor Materials, Final Report, NUREG/CR-6909, ANL-06/08, US Nuclear Regulatory Commission, 2007
- I.S. Jeong, G.H. Ha, T.R. Kim and H.I. Jeon: Characteristics of the Cyclic Hardening in Low Cycle Environmental Fatigue Test of CF8M Stainless Steel, Journal of Korea Society of Mechanical Engineers A, Vol.32 No.2, 177-185 (Korean), 2008 https://doi.org/10.3795/KSME-A.2008.32.2.177
- I.S. Jeong, G.H. Ha and H.I. Jeon: Strain Hardening Effect of CF8M Stainless Steel in the Environment Fatigue Test under Pressurized Water Reactor Condition, Journal of Loss Prevention in the Process Industries, 22 (2009), 879-883 https://doi.org/10.1016/j.jlp.2009.07.011
- O.K. Chopra and W.J. Shack: Review of the Margins for ASME Code Fatigue Design Curve-Effects of Surface Roughness and Material Variability, NUREG/CR-ANL-02/39, US Nuclear Regulatory Commission, 2003