참고문헌
- D. W. Jung, 2002, Analysis of Free Forging of Cylindrical Billets by Using Finite Element Method, J. Ocean Eng. Technol., Vol. 16, No. 6, pp. 49-54.
- J. H. Son, D. W. Bae, C. W. Park, H. Y. Lee, H. K. Seo, C. M. Seo, 2007, Study on Precision Cold Forming Process Design and Forming Analysis of Inner Sleeve Using 3D Finite Element Method, Proc. Kor. Soc. Precision Eng. Spring, pp. 579-580.
- S. Kubota, T. Yamamoto, M. Yamanaka, 2007, Forging Process Design by the Computer Simulation, Trans. Mater. Process., Vol. 16, No. 2, pp. 95-100. https://doi.org/10.5228/KSPP.2007.16.2.095
- Y. K. Kong, B. D. Lowe, S. J. Lee, E. F. Krieg, 2008, Evaluation of handle shapes for screw driving, Applied Ergonomics, Vol. 39, pp. 191-198. https://doi.org/10.1016/j.apergo.2007.05.003
- D. J. Kim, D. C. Ho, B. M. Kim, J. C. Choi, 1996, The Prediction of Geometric Configuration and Ductile Fracture Using the Artificial Neural Network for a Cold Forged Product, J. Kor. Soc. Precision Eng., Vol. 13, No. 10, pp. 105-111.
- J. Chen, B. Young, 2006, Stress-strain curves for stainless steel at elevated temperatures, Eng. Struct., Vol. 28, pp. 229-239. https://doi.org/10.1016/j.engstruct.2005.07.005
- M. G. Cockcroft, D. H. Latham, 1968, Ductile and the workability of metals, J. Inst. Metals, Vol. 96, pp. 33-39.
- Scientific Forming Technologies Corporation, 2008, DEFORM-3D Version 6.1 User’'s Manual.
- H. Kim, M. Yamanaka, T. Altan, 1995, Prediction and Elimination of Ductile Fracture in Cold Forging Using FEM Simulation, Proc. NAMRC, pp. 63-69.
피인용 문헌
- Damage prediction in the multistep forging process of subminiature screws vol.13, pp.9, 2012, https://doi.org/10.1007/s12541-012-0212-2
- Finite Element Analysis for Improvement of Folding Defects in the Forging Process of Subminiature Screws vol.32, pp.6, 2015, https://doi.org/10.7736/KSPE.2015.32.6.509
- Design of Cold Forging Process of Micro Screw for Mobile Devices vol.16, pp.6, 2015, https://doi.org/10.5762/KAIS.2015.16.6.3692