References
- Jang, D. K., Cho, H. Y., Lee, H. K., Kong Y. S. and Yang, G. E., "A study on tool path generation for machining impellers with 5-axis machining center", Journal of the Korean Society of Precision Engineering, Vol. 21, No. 3, pp. 83-90, 2004.
- Cho, H. Y., Jang, D. K., Lee, H. K., and Yang, G. E., "A study on efficient roughing of impellers with 5-axis NC machine", Journal of the Korean Society of Mechanical Engineering, Vol. 27, No. 11, pp. 1917-1924, 2003. https://doi.org/10.3795/KSME-A.2003.27.11.1917
- Jang, D. K., Cho, Shin, J. K., Hong, S. K., Lee, H. K. and Yang, G. E., "A study on reverse engineering and 5-axis NC machining of impeller", Journal of the Korean Society of Precision Engineering, Vol. 21, No. 6, pp. 60-68, 2004.
- Jang, D. K., Lim, K. N., and Yang, G. E., "A study on five-axis roughing of impeller with ruled surface", Journal of the Korean Society of Precision Engineering, Vol. 24, No. 7, pp. 60-68, 2007.
- Oh, J. Y., Hwang, J. D., Jung, H. C. and Jung, Y. G., "The Effect of Surface Roughness of Impeller by Tool Path and Posture", 2008 Autumn Conference of KSPE, pp. 347-348, 2008.
- Lee, K. Y., Kim, H. M. Park, S. S. and Jang, K. C., "The Determination of cutting conditions and machining process in 5-axis machining of a impeller", Conference of KSME, No. 6, pp. 1471-1474, 2006.
- Cho, M. H., Kim, D. W., Lee, C. G., Heo, E. Y., Ha, J. W. and Chen F. Frank., "CBIMS : Case-based impeller machining strategy support system", Robotics and Computer-Integrated Manufacturing 25, pp. 980-988, 2009. https://doi.org/10.1016/j.rcim.2009.04.017
- Jung, H. C., Park, K. B., Hwang, J. D. and Jung, Y. G., "A Study on the improvement of practicality of E-POST for 5-axis control machining", 2009 Autumn Conference of KSPE, pp. 543-544, 2009.
- Jung, H. C., Hwang, J. D., Kim, S. M. and Jung, Y. G., "The postprocessor technology for 5-axis control machining", Journal of the Korean Society of Manufacturing Process Engineering, Vol. 10, No. 2, pp. 9-15, 2011.
- Hwang, J. D., Lim, E. S. and Jung, Y. G., "The control technology of cutter path and cutter posture for 5-axis control machining", Journal of the Korean Society of Manufacturing Process Engineering, Vol. 10, No. 2, pp. 1-8, 2011.
- Park, K. B., Jung, H. C., Hwang, J. D. and Jung, Y. G., "A Continuous Control of Cutter Posture Change for Efficient 5-axis Machining of Impeller", Autumn Conference of KSMPE, Vol. 2010, No. 11, pp. 33-34, 2010.