한국기계가공학회지 (Journal of the Korean Society of Manufacturing Process Engineers)

  • 제10권5호
  • /
  • Pages.110-116
  • /
  • 2011
  • /
  • 1598-6721(pISSN)
  • /
  • 2288-0771(eISSN)
한국기계가공학회 (The Korean Society of Manufacturing Process Engineers)
권호 표지

타이어 패턴의 종그루브 인자에 따른 그루브 원더링 및 소음 특성 연구

The Study on the Characteristics of Groove Wandering and Noise Caused by the Design Parameter of Longitudinal Groove on the Tire's Pattern

  • 한진혁 (넥센타이어 연구개발본부) ;
  • 황성욱 (넥센타이어 연구개발본부) ;
  • 강용구 (넥센타이어 연구개발본부) ;
  • 한민현 (넥센타이어 연구개발본부)
  • 투고 : 2011.08.10
  • 심사 : 2011.10.06
  • 발행 : 2011.10.31
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

Water on a road surface can lower the coefficient of friction of vehicle tires and it involves lots of risks. One way to prevent water from staying is to cut many "rain grooves" into the edges of the pavement parallel. Such grooves, however, can exert unwanted side forces, particularly on passenger tires, which cause "Groove Wander" making the drivers uncomfortable. The "Groove Wander" is somewhat related to vehicle geometry, but is more strongly related to interaction between road grooves and tire tread's longitudinal grooves. This thesis tries to examine principles to estimate "Groove Wandering" effect focusing on the design of longitudinal groove. Additionally, it studied how to reduce pipe resonance longitudinal grooves form in the contact patch.

키워드

참고문헌

  1. Peters J. M.., "Application of the Lateral Stress Theory for groove Wander Prediction Using Finite Element Analysis", Tire Science and Technology, TSTCA, Vol. 29, No. 4, October-December 2001, pp. 244-257. https://doi.org/10.2346/1.2135242
  2. T. Doi and K.Ikeda, "Effect of Tire Tread Pattern on Groove Wander of Motocycles", Tire Science and Technology, TSTCA, Vol. 13, No. 3, July-September 1985, pp. 147-153. https://doi.org/10.2346/1.2150992
  3. Lee, D. H. and Song, H. Y., "A Study on the Sound Absorption Performance of a Helmholtz Resonator Combined with Porous Materials", Transactions of the Korean Society for Noise and Vibration Engineering, Vol. 19, pp. 628-633, 2009. https://doi.org/10.5050/KSNVN.2009.19.6.628
  4. Haa, S.T. and Kim, Y.H., "The Limitation and Applicability of Helmholtz Resonator, Regarding as Equivalent Single-Degree of Vibration System", Transactions of the Korean Society for Noise and Vibration Engineering, Vol. 4, pp. 209-219, 1994.
  5. Zinn, B. T., "A Theoretical Study of Non-Linear Damping by Helmholtz Resonators", Journal of Sound and Vibration 13(3), pp. 347-356, 1970. https://doi.org/10.1016/S0022-460X(70)80023-2
  6. Kim, S. R. and Kim, Y. H., "Absorptive Characteristics of a Helmholtz Resonator Damper by a Flexible Porous Screen", Proceeding of the KSNVE Annual Spring Conference, pp. 865-868, 2005.
  7. Tang, S.K., "On the Helmholtz Resonatots with Tapered Necks", Journal of Sound and Vibration, Vol. 279, pp. 1085-1096, 2005. https://doi.org/10.1016/j.jsv.2003.11.032
  8. Song, H.Y. and Lee, Y.C., "A Study on the Design Parameter of a Resonance type Absorber", Proceeding of KSNVE Annual Autumn Conference, pp. 964-968, 2007.
  9. Shu, F., "Reduction of Tire Groove Noise Using Slot Resonators", Tire Society Conference, 2008.