참고문헌
- 2005, Bunker, R.S., "A Review of Shaped Hole Turbine Film-Cooling Technology," Journal of Heat Transfer, Vol.127, pp. 441-453. https://doi.org/10.1115/1.1860562
- 2004, Taslim, M.E. and Ugarte, S., "Discharge Coefficient Measurements for Flow through Compound-Angle Conical Holes with Cross-Flow," The International Journal of Rotating Machinery, Vol.10, No.2, pp.145-153. https://doi.org/10.1155/S1023621X04000156
- 2007, Lu, Y., "Effect of Hole Configurations on Film Cooling from Cylindrical Inclined Holes for the Application to Gas Turbine Blades," Ph. D Thesis, Louisiana State University.
- 2003, Saumweber, C., Schulz, A. and Wittig, S., "Free-Stream Turbulence Effects on Film Cooling With Shaped Holes," Journal of Turbomachinery, Vol.125, pp.65-73 https://doi.org/10.1115/1.1515336
- 2010, Liu, J.S., Malak, M.F., Tapia L.A., Crites, D.C., Ramachadran, D., Srinivasan, B., Muthiah, G. and Venkaramanan, J., "Enhanced Film Cooling Effectiveness with New Shaped Holes," Proceedings of ASME Turbo Expo 2010, GT2010-22774.
- 2002, Yu, Y., Yen, C. -H., Shih, T. I. -P., Chyu, M. K. and Gogineni, S., "Film Cooling Effectiveness and Heat Transfer Coefficient Distributions Around Diffusion Shaped Holes," Journal of Heat Transfer, Vol.124, No.5, pp.820-827. https://doi.org/10.1115/1.1418367
- 2010, Ghorab, M., Hassan, I. and Lucas T., "An Experimental Investigation of a New Hybrid Film Cooling Scheme," International Journal of Heat and Mass Transfer, Vol.53, No.21-22, pp.4994-5007. https://doi.org/10.1016/j.ijheatmasstransfer.2010.05.026
- 2006, Zhang, X.Z. and Hassan, I., "Film Cooling Effectiveness of an Advanced-Louver Cooling Scheme for Gas Turbines," Journal of Thermophysics and Heat Transfer, Vol.20, No.4, pp.754-763. https://doi.org/10.2514/1.18898
- 2002, Sargison, J.E., Guo, S.M., Oldfield, M.L.G., Lock, G. D. and Rawlinson, A. J., "A Converging Slot-Hole Film-Cooling Geometry - Part 1: Low-Speed Flat-Plate Heat Transfer and Loss," Journal of Turbomachinery-Transactions of the ASME, Vol.124, No.3, pp.453-460. https://doi.org/10.1115/1.1459735
- 2003, Nasir, H., Acharya, S., and Ekkad, S., "Improved film cooling from cylindrical angled holes with triangular tabs_effect of tab orientations," International Journal of heat and fluid flow, Vol.24, No.5, pp.657-668. https://doi.org/10.1016/S0142-727X(03)00082-1
- 2009, Lu, Y., Dhungel, A., Ekkad, S.V. and Bunker, R.S., "Effect of Trench Width and Depth on Film Cooling from Cylindrical Holes Embedded in Trenches,", Journal of Turbomachinery, Vol.131, No.1, pp.1-13.
- 2006, CFX-11.0 Solver Theory, ANSYS Inc.
- 2001, Menter, F. and Esch, T., "Elements of industrial heat transfer prediction," 16th Brazilian Congress of Mechanical Engineering (COBEM), Uberlandia Brazil
- 1986, Wilcox, D. D., "Multiscale model for turbulent flows," AIAA 24th Aerospace Science Meeting, American Institute of Aeronautics and Astronautics.
- 1997, Bardina, J.E., Huang, P.G. and Coakley, T., "Turbulence Modeling Validation," Fluid Dynamics Conference 28th, AIAA pp. 1997-2121.
- 2010, Lee, K.D. and Kim, K.Y., "Shape Optimization of Fan-Shaped Hole to Enhance Film-Cooling Effectiveness," International Journal of Heat and Mass Transfer, Vol.53, No. 15-16, pp.2996-3005. https://doi.org/10.1016/j.ijheatmasstransfer.2010.03.032
- 2011, Lee, K.D. and Kim, K.Y., "Surrogate Based on Optimization of a Laidback Fan-Shaped Hole for Film-Cooling," International Journal of Heat and Fluid Flow, Vol.32, No.1, pp.226-238. https://doi.org/10.1016/j.ijheatfluidflow.2010.08.007
피인용 문헌
- Numerical Study on the Effect of Injection Nozzle Shape on the Cooling Performance in Supersonic Film Cooling vol.44, pp.8, 2016, https://doi.org/10.5139/JKSAS.2016.44.8.641