DOI QR코드

DOI QR Code

중성자 래디오그래피를 이용한 액체금속 유동장 측정

Measurement of Liquid-Metal Flow with a Dynamic Neutron Radiography

  • 차재은 (한국원자력연구원 고속로기술개발부) ;
  • 사이토 (교또대 원자로연구소)
  • 투고 : 2011.12.12
  • 심사 : 2011.12.27
  • 발행 : 2011.12.31

초록

The flow-field of a liquid-metal system is very important for the safety analysis and the design of the steam generator of liquid-metal fast breeder reactor. Dynamic neutron radiography (DNR) is suitable for a visualization and measurement of a liquid metal flow and a two-phase flow in a metallic duct. However, the three dimensional DNR techniques is not enough to obtain the velocity information in the wide channel up to now. In this research, a high speed DNR technique was applied to visualize the heavy liquid-metal flow field in the narrow channel with the HANARO-beam facility. The images were taken with a high frame-rate neutron radiography at 250 fps and analyzed with a Particle Image Velocimetry(PIV) method. The images were compared with the results of the commercial CFX code to study the feasibility of DNR technique for the measuring the heavy liquid-metal flow field. The PIV images could discern the turbulent vortex flow in the two-dimensional narrow channel.

키워드

참고문헌

  1. I.C. Lim,2001,Study on the characterization of the neutron radiography facility in HANARO for twophase flow research,KAERI Report,KAERI/RR- 2094/20010.
  2. Mishima K.,Hibiki T.,1996,"Quantitative method to measure void fraction of two-phase flow using electronic imaging with neutrons," Nuclear Science and Engineering,Vol. 124,pp. 327-338. https://doi.org/10.13182/NSE96-A28582
  3. I.C. Lim, 2004, ITMNR-5,Garching, Germany, 26- 30 July.
  4. Y. Saito,2000,"Visualization and measurement of liquid phase velocity and void fraction of gas-liquid metal two-phase flow by using neutron radiography," 9th Symposium on Flow Visualization
  5. D.H. Han et al., 2007, KALIMER-600 Conceptual Design Report, KAERI/TR-3381/2007, KAERI Technical Report.