Journal of the Korean Society of Manufacturing Process Engineers (한국기계가공학회지)

The Korean Society of Manufacturing Process Engineers (한국기계가공학회)
권호 표지

A Study on Grinding Wheel Manufacture and Assessment for Application in Weaving Machine

방직산업용 연삭숫돌 제작 및 성능평가에 관한 연구

  • 김창록 (한국폴리텍VII대학 메카트로닉스과)
  • Received : 2011.03.07
  • Accepted : 2011.05.11
  • Published : 2011.06.30
Download PDF
⟨ Previous Next ⟩

Abstract

A weaving machine for texture industry uses a lot of needles and the nib of these needles is necessary to be kept with sharp edge. The re-grinding of the needle by a special purpose of the grinding wheel can be selected for achieving this aim. This study focused on the manufacture and performance assessment the special grinding wheel. A forming mold for the grinding wheel was designed and a sintering process for furnace process control was established. Manufactured wheels were tested for determining suitable grade of the wheel. The selection of optimal grinding conditions was achieved by a response surface method and a genetic algorithm.

Keywords

References

  1. Lee, L. S. and Kim, N. H., "A study on the machining characteristics in the experimental plunge grinding using the current signal of the spindle motor", International Journal of Machine Tools & Manufacture, Vol. 41, No. 7, pp. 937-951, 2001. https://doi.org/10.1016/S0890-6955(00)00130-9
  2. Hou, Z. B., and Komanduri, R., "On the mechanics of the grinding process, Part 2-thermal analysis of fine grinding", International Journal of Machine Tools & Manufacture, Vol. 44, No. 2-3, pp. 247-270, 2004. https://doi.org/10.1016/j.ijmachtools.2003.09.008
  3. Lin, B., Yu, S. Y. and Wang, S. X., "An experimental study on molecular dynamics simulation in nanometer grinding", Journal of Materials Processing Technology, Vol. 138, pp. 484-488, 2003. https://doi.org/10.1016/S0924-0136(03)00124-9
  4. Lee, C. S., Chae, S. S., Kim, J. P., Lee. J. C., and Choi, H., "A study on the grinding force of silicon", Journal of Korean Society of Manufacturing Process Engineers, Vol. 5, No. 1, pp. 33-38, 2006.
  5. Malkin, S., Grinding technology-theory and applications of machining with abrasives, JOHN WILEY & SONS, New York, 1989.
  6. Kwak, J. S., "Application of Taguchi and response surface methodologies for geometric error in surface grinding process", International Journal of Machine Tools & Manufacture, Vol. 45, pp. 327-334, 2005. https://doi.org/10.1016/j.ijmachtools.2004.08.007
  7. Dhavlikar, M. N., Kulkarni, M. S. and Mariappan, V., "Combined Taguchi and dual response method for optimization of a centerless grinding operation", Journal of Materials Processing Technology, Vol. 132, No. 1-3, pp. 90-94, 2003. https://doi.org/10.1016/S0924-0136(02)00271-6