References
- Fasbinder DJ. Clinical performance of chairside CAD/CAM restorations. J Am Dent Assoc 2006;137:22S-31S.
- Syrek A, Reich G, Ranftl D, Klein C, Cerny B, Brodesser J. Clinical evaluation of all-ceramic crowns fabricated from intraoral digital impressions based on the principle of active wavefront sampling. J Dent 2010;38:553-9. https://doi.org/10.1016/j.jdent.2010.03.015
- Han J, Wang Y, Lu¨ P. A preliminary report of designing removable partial denture frameworks using a specifically developed software package. Int J Prosthodont 2010;23:370-5.
- Eggbeer D, Bibb R, Williams R. The computer-aided design and rapid prototyping fabrication of removable partial denture frameworks. Proc Inst Mech Eng H 2005;219:195-202.
- Williams RJ, Bibb R, Rafik T. A technique for fabricating patterns for removable partial denture frameworks using digitized casts and electronic surveying. J Prosthet Dent 2004;91:85-8. https://doi.org/10.1016/j.prosdent.2003.10.002
- Williams RJ, Bibb R, Eggbeer D, Collis J. Use of CAD/CAM technology to fabricate a removable partial denture framework. J Prosthet Dent 2006;96:96-9. https://doi.org/10.1016/j.prosdent.2006.05.029
- Williams RJ, Bibb R, Eggbeer D. CAD/CAM in the Fabrication of Removable Partial Denture Frameworks: A Virtual Method of Surveying 3D Scanned Dental Casts. Quintessence J Dent Technol 2004;2:268-76
- Bibb RJ, Eggbeer D, Williams RJ, Woodward A. Trial fitting of a removable partial denture framework made using computeraided design and rapid prototyping techniques. Proc Inst Mech Eng H 2006;220:793-7.
- Pham DT, Gault RS. A comparison of rapid prototyping technologies. Int J Mach Tool Manuf 1998;38:1257-87. https://doi.org/10.1016/S0890-6955(97)00137-5
- Yadroitsev I, Bertrand Ph, Smurov I. Parametric analysis of the selective laser melting process. Appl Surf Sci 2007;253:8064-9. https://doi.org/10.1016/j.apsusc.2007.02.088
- Kibi M, Ono T, Dong J, Mitta K, Gonda T, Maeda Y. Development of an RPD CAD system with finite element stress analysis. J Oral Rehabil 2009;36:442-50. https://doi.org/10.1111/j.1365-2842.2009.01949.x
- Sun Y, Lu¨ P, Wang Y. Study on CAD&RP for removable complete denture. Comput Methods Programs Biomed 2009;93: 266-72. https://doi.org/10.1016/j.cmpb.2008.10.003
Cited by
- RPD framework fabrication using computer-aided design (CAD) and rapid prototyping vol.55, pp.1, 2017, https://doi.org/10.4047/jkap.2017.55.1.94
- Comparison of internal adaptation of removable partial denture metal frameworks made by lost wax technique and printing technique of pattern using CAD vol.56, pp.1, 2018, https://doi.org/10.4047/jkap.2018.56.1.17
- A case of removable dentures using digital method vol.56, pp.3, 2018, https://doi.org/10.4047/jkap.2018.56.3.250
- Fabrication of surveyed crown and frameworks for removable partial dentures using electronic surveying vol.41, pp.2, 2011, https://doi.org/10.21851/obr.41.02.201706.89
- 전자 서베잉을 이용한 서베이드 크라운 제작 후 국소의치 수복: 증례보고 vol.33, pp.2, 2011, https://doi.org/10.14368/jdras.2017.33.2.135
- 전신성 피부경화증 환자에서의 3차원 구강스캐너를 이용한 가철성 국소의치 제작 증례 vol.59, pp.1, 2011, https://doi.org/10.4047/jkap.2021.59.1.116