References
- A. A. Sameh and H. J. Ache: Radiochimia Acta, "Production Techniques of Fission Molybdenum99," 41 (1987) 65
- A. A. Sameh and H. J. Ache: IAEA-TECDOC-515, "Production Techniques of Fission 99Mo," Fission Molybdenum for Medical use, (1989) 47-64
- J. L. Snelgrove, et al: Nuclear Engineering and Design, "Development of Very-high-density Low-enriched-uranium Fuels," 178 (1997) 119 https://doi.org/10.1016/S0029-5493(97)00217-3
- J. L. Snelgrove, et al: in Proc. 22nd Int. Conf. on RERTR, "Progress in Converting Mo99 Production from High-to- Low-Enrichment uranium-1999," 1 (1999) 2-7
- Ki-Hwan Kim, et al: J. Kor. Foundrymen's Soc. "Fabrication and Characterization of Wide uranium Foils by Planar Flow Casting Method," 27 (2007) 225
- S. N. Tewari et al: Mater. Sci. Eng., "Effects of Process Parameters on Melt-spun Ag Cu, 98 (1988) 89-93 https://doi.org/10.1016/0025-5416(88)90133-4
- D. Ma and P.R.Sahm: Acta Metall. Mater, "Solidification Behavior of Superalloy in 939 in Melt Spinning," 40 (1922) 251
- H. H. Liebermann : J. of Crystal Growth., "Rapidly Solidified Alloys Made by Chill Block Melt-spinning Process," 70 (1984) 497 https://doi.org/10.1016/0022-0248(84)90308-7
- Sung-Hwan Moon, et al: J. of the Korean Inst.of Met & Mater, "Effect of PFC parameters on the Thickness and Surface Defect of Amorphous Alloy Ribbon," 34 (1996) 1282
- Sang-Mok Lee and Chun-Pyo Hong: J. Kor. Foundrymen's Soc, "Fabrication of Wide Al-Ni Polycrystalline Ribbons by Planar Flow Casting and its Solidification Characteristics," 15 (1995) 35
- G. F. Vandegrift, et al.: Ind. Eng. Chem. Res, "Modification of Targets and Processes for Conversion of Mo-99 Production from High-to-Low-Enriched Uranium," 9 (2000) 39
- K. H. Kim, et al: J. Korean Nuclear Society, "Stable In-reactor Performance of Centrifugally Atomized u-10wt.%Mo Dispersion Fuel at Low Temperature," 33 (2001) 365