참고문헌
- A. Hermann, T. Chaudhuri, P. Spagnol., Int. J. Hydrogen Energy, "Bipolar Plates for PEM fuel cells: A review", Vol. 30, 2005, 1297- 1302. https://doi.org/10.1016/j.ijhydene.2005.04.016
- E. Middelman, W. Kout, B. Vogelaar, J. Lenssen, E. de Waal., J. Power Sources, "Bipolar plates for PEM fuel cells", Vol. 118, 2003, 44-46. https://doi.org/10.1016/S0378-7753(03)00070-3
- S. Mahabunphachai, O. N. Cora, M. Koc, J. Power Sources, "Effect of manufacturing processes on formability and surface topography of proton exchange membrane fuel cell metallic bipolar plates", Vol. 195, 2010, 5269-5277. https://doi.org/10.1016/j.jpowsour.2010.03.018
- F. Dundar, E. Dur, S. Mahabunphachai, M. Koc., J. Power Sources, "Corrosion resistance characteristics of stamped and hydroformed proton exchange membrane fuel cell metallic bipolar plates", Vol. 195, 2010, 3546-3552. https://doi.org/10.1016/j.jpowsour.2009.12.040
- G. M. Yoon, D. H. Kang, Y. J. Ko, J. D. Lim., KSAE 2009 Annual Conference, "Application of High Level Vacuum Die- Casting for the Automotive Parts", 1540-1546.
- X. P Niu, B. H. Hu, I. Pinwill, H. Li., J. Mater. Proc. Technol, "Vacuum assisted high pressure die casting of aluminium alloys", Vol. 105, 2000, 119-127. https://doi.org/10.1016/S0924-0136(00)00545-8
- C. K. Jin, C. G. Kang., J. Kor. Foundry's Soc., "Fabrication Process of Aluminum Bipolar Plate for Fuel Cell using Vacuum Die Casting", Vol. 31, 2011, 71-78 https://doi.org/10.7777/jkfs.2011.31.2.071
- J. Park, X. Li. J. Power Sources, "An experimental and numerical investigation on the cross flow through gas diffusion layer in a PEM fuel cell with a serpentine flow channel", Vol. 163, 2007, 853-863. https://doi.org/10.1016/j.jpowsour.2006.09.083
- R. Boddu, U. K. Marupakula, B. Summers, P. Majumdar, J. Power Source, "Development of bipolar plates with different flow channel configurations for fuel cells". 2009. 1083-1092.
- A. Zovi, F. Casarotto., METALLURGIA ITALIANA, "Silafont- 36, the low iron ductile die casting alloy development and application", Vol. 99, 2007, 33-38.
- Koch. H, Hielscher. U, H. Sternau, A. Franke., Light Metals, TMS book, "Silafont-36, the new lowiron high pressure die casting alloy", 1995, 1011-1018.
- Website, http://www.rheinfelden-alloys.eu/web/guest/anwendungsgebiete18.
- D. H. Lee, C. G. Kang, S. K. Lee., J. Kor. Foundry's Soc., "Prediction Defect of Automotive Components by Filling and Solidification Analysis, Vol. 20, No 3, 2000, 159-166.
- L. Y. Pio., J. Applied Sciences, "Effect of T6 Heat Treatment on the Mechanical properties of Gravity Die Cast A356 Aluminium Alloy", Vol. 11. 2011, 2048-2052. https://doi.org/10.3923/jas.2011.2048.2052
피인용 문헌
- Effect of Casting Thickness and Plunger Velocity on Porosity in Al Plate Diecasting vol.35, pp.4, 2015, https://doi.org/10.7777/jkfs.2015.35.4.080