DOI QR코드

DOI QR Code

Wear Behavior of Al-based Composites according to Reinforcements Volume Fraction

강화상의 분율에 따른 알루미늄기 복합재료의 마모거동

  • Received : 2011.08.04
  • Accepted : 2011.09.16
  • Published : 2011.10.31

Abstract

SiC particulate reinforced Al matrix composites with different SiC volume fractions were fabricated by thermal spray process. And the dry sliding wear test were performed on these composites using the applied load of 10 N, rotational speed of 30 rpm, radius of rotation 15 mm. Wear tracks on the Al/SiC composites were investigated using scanning electron microscope(SEM) and energy dispersive spectroscopy (EDS). It was observed that wear behavior of Al/SiC composites and formation of MML was changed dramatically according to reinforcement volume fraction.

Keywords

References

  1. Gul, F. and Acilar, M., 2004, "Effect of the Reinforcement Volume Fraction on The Dry Sliding Wear Behaviour of Al-10Si/SiCp Composites Produced by Vacuum Infiltration Technique", Composites Science and Technology, Vol. 64, Issues 13-14, pp. 1959-1970. https://doi.org/10.1016/j.compscitech.2004.02.013
  2. V. P. Rotshtein et al., 2004, "Surface Modification and Alloying of Metallic Materials with Low-energy High-current Electron Beams", Surface and Coatings Technology, Vol. 180-181, pp. 377-381. https://doi.org/10.1016/j.surfcoat.2003.10.085
  3. M. Astrand et al., 2004, "PVD-$Al_2O_3$-coated Cemented Carbide Cutting Tools", Surface and Coatings Technology, Vol. 188-189, pp. 186-192. https://doi.org/10.1016/j.surfcoat.2004.08.021
  4. L.A. Dobrzanski, and K. Lukaszkowicz, 2004, "Erosion Resistance and Tribological Properties of Coatings Deposited by Reactive Magnetron Sputtering Method onto the Brass Substrate" Journal of Materials Processing Technology, Vol. 157-158, pp. 317-323. https://doi.org/10.1016/j.jmatprotec.2004.09.050
  5. K. Ghosh, T. Troczynski and A. C. D. Chaklader, 1998, "Aluminum-Silicon Carbide Coating by Plasma Spraying", Journal of Thermal Spray Technology, No. 7, pp. 78-86. https://doi.org/10.1007/s11666-006-5007-5
  6. M. Acilar and F. Gul, 2004, "Effect of the Applied Load, Sliding Distance and Oxidation on the Wear Behavior of Al-10Si/SiCp Composites Produced by Vacuum Infiltration Technique", Materials and Design, Vol. 25, pp. 209-217 https://doi.org/10.1016/j.matdes.2003.09.015
  7. M.R. Rosenberger, C.E. Schvezov, and E. Forlerer, 2005, "Wear of Different Aluminum Matrix Composites under Conditions that Generate a Mechanically Mixed Layer", Wear, Vol. 259, pp. 590-601. https://doi.org/10.1016/j.wear.2005.02.003