참고문헌
- Gul, F. And Acilar, M., 2004, "Effect Of The Reinforcement Volume Fraction on The Dry Sliding Wear Behaviour of Al-10Si/Sicp Composites Produced by Vacuum Infiltration Technique", Composites Science and Technology, Vol 64, Issues 13-14, pp. 1959-1970. https://doi.org/10.1016/j.compscitech.2004.02.013
- V. P. Rotshtein et al., 2004, "Surface Modification and Alloying of Metallic Materials with Low-energy High-current Electron Beams", Surface and Coatings Technology, Vol. 180-181, pp. 377-381. https://doi.org/10.1016/j.surfcoat.2003.10.085
-
M. Astrand et al., 2004, "PVD-
$Al_2O_3$ -coated Cemented Carbide Cutting Tools", Surface and Coatings Technology, Vol. 188-189, pp. 186-192. https://doi.org/10.1016/j.surfcoat.2004.08.021 - L.A. Dobrzanski, and K. Lukaszkowicz, 2004, "Erosion Resistance and Tribological Properties of Coatings Deposited by Reactive Magnetron Sputtering Method onto the Brass Substrate" Journal of Materials Processing Technology, Vol. 157-158, pp. 317-323. https://doi.org/10.1016/j.jmatprotec.2004.09.050
- J. F. Li, L. Li and F. H. Stott, 2004, "Statistical Approach for Minimizing Cracks in Combined Flame Spraying and Laser Surface Modification of Refractory Ceramics" Journal of the European Ceramic Society, Vol. 563, Issue 2, pp. 249-255.
- K. Ghosh, T. Troczynski and A. C. D. Chaklader, 1998, "Aluminum-Silicon Carbide Coating by Plasma Spraying", J. of Thermal Spray Technology, No. 7, pp. 78-86. https://doi.org/10.1007/s11666-006-5007-5
- Kavian Cooke et al., 2007, "Optimisation of the Electric Wire Arc-Spraying Process for Improved Wear Resistance Of Sugar Mill Roller Shells", Surface & Coatings Technology, Vol. 202, pp. 185-188. https://doi.org/10.1016/j.surfcoat.2007.05.015
- W. Fang et al., 2008, "Processing Optimization, Surface Properties and Wear Behavior of HVOF Spraying Wc-Crc-Ni Coating", J. Mater. Process. Technol., Vol. 209, pp. 3561-3567.
- Christel Pierlot et al., 2008, "Design of Experiments in Thermal Spraying: A Review", Surface & Coatings Technology, Vol. 202, pp. 4483-4490. https://doi.org/10.1016/j.surfcoat.2008.04.031
- Robert L. Mason, Richard F. Gunst, and James L. Hess, 2003, "Statistical Design and Analysis of Experiments with Applications to Engineering And Science", A John Wiley & Sons Inc., Hoboken, New Jersey, p. 109.
- J. Paulo Davim, 2003, "Design of Optimisation of Cutting Parameters for Turning Metal Matrix Composites Based on the Orthogonal Arrys", J. Mater. Process. Technol., Vol. 132, pp. 340-344. https://doi.org/10.1016/S0924-0136(02)00946-9
- R. Gonzalez et al., 2006, "Wear Behavior of Flame Sprayed NiCrBSi Coatings Remelted by Flame or By Laser", Wear, Vol. 262, pp. 301-307.