DOI QR코드

DOI QR Code

Establishment of strain measurement system for evaluation of strain effect in HTS tapes under magnetic field

  • Dedicatoria, Marlon J. (Department of Mechanical Design Engineering, Andong National University) ;
  • Shin, Hyung-Seop (Department of Mechanical Design Engineering, Andong National University)
  • Received : 2011.10.31
  • Accepted : 2011.11.16
  • Published : 2011.11.30

Abstract

The evaluation of the electromechanical properties of HTS CC tapes is one of the foremost procedures to be done to ensure the applicability of superconducting wires to electric devices. A precise measurement of the stress and strain is important in deriving the mechanical properties under operating environment. Up to now, there is no standard test method yet for the electromechanical property evaluation of HTS tapes under self field and external magnetic field although there are already reports on the different devices used to evaluate these properties. Strain can be measured by adopting a strain gauge or a high resolution double extensometer. In this study, strain effect on $I_c$ in HTS CC tapes under magnetic fields was evaluated. Comparison of advantages and setback of strain measuring devices were discussed. In addition, a dual strain measurement system using both the SG and extensometer may be practical to lessen the burden in case one of the measuring devices does not work well.

Keywords

References

  1. H. W. Weijers, U. P. Trociewitz, W. D. Markiewics, J. Jiang, D. Myers, E. E. Hellstrom, A. Xu, J. Jaroszynski, P. Noyes, Y. Viouchkov, D. C. Larbalestier, "High field magnets with HTS conductors," IEEE Trans. Appl. Supercond., vol. 20, pp. 576-582, 2010. https://doi.org/10.1109/TASC.2010.2043080
  2. S. Awaji, R. Ishihara, M. Namba, G. Nishigima, H. Oguro, K. Watanabe, K. Shikimachi, N. Hirano, S. Nagaya, "Upgrading design to a 25T cryogen-free superconducting magnet based on low temperature and high magnetic field properties of the practical CVD processed coated conductors," IEEE Trans. Appl. Supercond., vol. 20, pp. 592-595, 2010. https://doi.org/10.1109/TASC.2010.2041755
  3. Y. J. Kim, S. E. Yang, D. K. Park, K. S. Chang, J. B. Na, Y. S. Yoon, T. K. Ko, "Experimental research on basic design and protection of high-$T_c$ heater triggered switch in liquid helium," Journal of KIASC, vol. 10, pp. 13-17, 2008.
  4. D. C. van der Laan, J. W. Ekin, "Large intrinsic effect of axial strain on the critical current of high-temperature superconductors for electric power applications," Appl. Phys. Lett., vol. 90, pp. 052506, 2007. https://doi.org/10.1063/1.2435612
  5. D. Uglietti, B. Seeber, V. Abacherli, W. L. Carter, R. Flukiger, "Critical currents versus applied strain for industrial Y-123 coated conductors at various temperatures and magnetic fields up to 19T," Supercond. Sci. Tech., vol. 19, pp. 869-872, 2006. https://doi.org/10.1088/0953-2048/19/8/032
  6. P. Sunwong, J. S. Higgins, D. Hampshire, "Angular, temperature, and strain dependencies of the critical current of DI-BSCCO tapes in high magnetic fields," IEEE Trans. Appl. Supercond., vol. 21, pp. 2840-2844, 2011. https://doi.org/10.1109/TASC.2010.2097573
  7. D. C. van der Laan, J. W. Ekin, J. F. Douglas, C. C. Clickner, T. C. Stauffer, L. F. Goodrich, "Effect of strain, magnetic field and field angle on the critical current density of $YBa_2Cu_3O_{7-\delta}$ coated conductors," Supercond. Sci. Tech., vol. 23, pp. 072001, 2010. https://doi.org/10.1088/0953-2048/23/7/072001
  8. M. Sugano, T. Nakamura, T. Manabe, K. Shikimachi, N. Hirano, S. Nagaya, "The intrinsic strain effect on critical current under a magnetic field parallel to the c-axis for a MOCVD-YBCO-coated conductor," Supercond. Sci. Tech., vol. 21, pp. 115019, 2008. https://doi.org/10.1088/0953-2048/21/11/115019
  9. M. Sugano, K. Shikimachi, N. Hirano, S. Nagaya, "The reversible strain effect on critical current over a wide range of temperatures and magnetic fields for YBCO coated conductors," Supercond. Sci. Tech., vol. 23,pp. 085013, 2010. https://doi.org/10.1088/0953-2048/23/8/085013
  10. J. R. C. Dizon, R. Bonifacio, S. T. Park, H. S. Shin, "Variation of the transport property in lap-jointed YBCO coated conductor tapes with tension and bending deformation," Journal of KIASC, vol. 9, pp. 11-14, 2007.
  11. H. S. Shin, J. R. C. Dizon, R. Bonifacio, J. S. Park, "Influence of bending strain on $I_c$ degradation behavior in YBCO CC tapes processed using RABiTS/MOD," Journal of KIASC, vol. 9, pp. 11-14, 2007.
  12. K. Watanabe, H. Oguro, K. Minegishi, S. Awaji, G. Nishigima, "Strain gauge method for evaluating a three dimensional residual strain state in $Nb_3Sn$ wires," IEEE Trans. Appl. Supercond., vol. 20, pp. 1420-1423, 2010. https://doi.org/10.1109/TASC.2010.2044031
  13. A. Nyilas, "Strain sensing systems tailored for tensile measurement of fragile wires," Supercond. Sci. Tech., vol. 18, pp. S409-S415, Dec. 2005. https://doi.org/10.1088/0953-2048/18/12/031
  14. H. S. Shin, K. H. Kim, J. R. C. Dizon, T. Y. Kim, R. K. Ko, S. S. Oh, "The strain effect on critical current in YBCO coated conductors with different stabilizing layers," Supercond. Sci. Tech., vol. 18, pp. S364-S368, 2005. https://doi.org/10.1088/0953-2048/18/12/023
  15. R. Flukiger, D. Uglietti, V. Abacherli, B. Seeber, "Asymmetric behavior of $J_c(\varepsilon)$ in $Nb_3Sn$ wires and correlation with the stress induced elastic tetragonal distortion," Supercond. Sci. Tech., vol. 18, pp. S416-S423, 2005. https://doi.org/10.1088/0953-2048/18/12/032
  16. H. S. Shin, M. J. Dedicatoria, J. R. C. Dizon, H. S. Ha, S. S. Oh, "Bending strain characteristics of critical current in REBCO CC tapes in different modes," Physica C., vol. 469, pp. 1467-1471, 2009. https://doi.org/10.1016/j.physc.2009.05.067
  17. M. Sugano, K. Osamura, W. Prusseit, R. Semerad, T. Kuroda, K. Itoh, T. Kiyoshi, "Reversible strain dependence of critical current in 100 A class coated conductors," IEEE Trans. Appl. Supercond., vol. 15, pp. 3581-3584, 2005. https://doi.org/10.1109/TASC.2005.849365
  18. G. Nishigima, K. Minegishi, K. Watanabe, K. Ohata, K. Nagawa, G. Iwaki, "Effect of ODS-Cu composition for mechanical-electromagnetic property of bronze-processed $Nb_3Sn$ superconducting wire," IEEE Trans. Appl. Supercond., vol. 20, pp. 1391-1394, 2010. https://doi.org/10.1109/TASC.2010.2043348

Cited by

  1. Macroscopic Strain Response of $I_{\rm c} $ Under Magnetic Fields in Differently Stabilized REBCO CC Tapes vol.25, pp.3, 2015, https://doi.org/10.1109/TASC.2014.2366721
  2. Reversible Strain Response of Critical Current in Differently Processed GdBCO Coated Conductor Tapes Under Magnetic Fields vol.23, pp.3, 2013, https://doi.org/10.1109/TASC.2012.2232960