DOI QR코드

DOI QR Code

Impact Performance of a Crash Member Filled with Aluminum Foam

알루미늄 폼이 충전된 충돌부재의 충격흡수 성능

  • 김낙현 (한국기계연구원 부설 재료연구소) ;
  • 김지훈 (한국기계연구원 부설 재료연구소) ;
  • 이종국 (현대자동차 중앙연구소) ;
  • 김대용 (한국기계연구원 부설 재료연구소)
  • Received : 2011.09.26
  • Accepted : 2011.11.09
  • Published : 2011.12.01

Abstract

The energy absorbing characteristics of crash members in a car collision play an important role in controlling the amount of damage to the passenger compartment. Crash members filled with aluminum foam are expected to have reduced mass while maintaining or even improving the crashworthiness compared to the conventional hollow-beam types. Finite element simulations are carried out in the present work to assess the improvement of crashworthiness by the use of aluminum foam fillers. The numerical results agreed well with experimental measurements. Parametric studies are conducted to analyze the effect of impact velocity, weld strength, and initiator on the crash response.

Keywords

References

  1. J. S. Yoo, S. B. Kim, M. Y. Lee, H. Huh, 2008, Development of Al Crash Box for High Crashworthiness Enhancement, Trans. Mater. Process, Vol. 17, No 3, pp. 182-188. https://doi.org/10.5228/KSPP.2008.17.3.182
  2. J. W. Kim, I. S. Park, C. S. Lee, 2010, A Study on the Improvement of a Damageabillity and Repairability by Improving Mounting Structure of a Bumper for Passenger Cars, Trans. Kor. Soc. Mech. Eng, Vol. 34, No. 1, pp. 1-9. https://doi.org/10.3795/KSME-A.2010.34.1.1
  3. A. K. Kim, H. J. Lee, S. S. Cho, 2003, Proc. Kor. Soc. Mech. Eng. Conf.(ed. K.Y. Lee), Pusan, Korea, p. 19.
  4. S. Santos, T. Wierzbicki, M. Langseth, 2000, Experimental and Numerical Studies of Foam-Filled Sections, Int. J. Impact Eng., Vol. 24, No. 5, pp. 509-533. https://doi.org/10.1016/S0734-743X(99)00036-6
  5. B. D. Yoon, S. J. Heo, B. J. Kim, H. Y. Kim, J. K. Kim, H. Kang, J. M. Kim, 2000, Proc. Kor. Soc. Automot. Eng. Conf.(ed. B.S. Shim), Daegu, Korea,p. 951.
  6. H. Y. Kim, J. K. Kim, S. J. Heo, H. Kang, 2002, Design of the Impact Energy Absorbing Members and Evaluation of the Crashworthiness for Aluminum Intensive Vehicle, Trans. Kor. Soc. Automot. Eng., Vol. 10, No. 1, pp. 216-233.
  7. S. M. Oak, Y. H. Moon, 2001, Physical Modeling of Process Parameters for Aluminum-Foam Generation, Trans. Kor. Soc. Mech. Eng., Vol. 10, No 7, pp. 558-564.
  8. W. Chen, 2001, Experimental and Numerical Study on Bending Collapse of Aluminum Foam-filled Hat Profiles, Int. J. Solid Struct., Vol. 38, No. 44-45, pp. 7919-7944. https://doi.org/10.1016/S0020-7683(01)00094-4
  9. H. W. Song, Z. J. Fan, G. Yu, Q. C. Wang, A. Tobota, 2005, Partition Energy Absorption of Axially Crushed Aluminum Foam-filled Hat Sections, Int. J. Solid Struct., Vol. 42, No. 9-10, pp. 2575-2600. https://doi.org/10.1016/j.ijsolstr.2004.09.050
  10. H. R. Zarei, M. Kroger, 2008, Optimization of the Foam-filled Aluminum Tubes for Crush Box Application, Thin Walled Struct., Vol. 46, No. 2, pp. 214-221. https://doi.org/10.1016/j.tws.2007.07.016
  11. A. K. Toksoy, M. Guden, 2011, Partial Al Foam Filling of Commercial 1050H14 Al Crash Boxes: The Effect of Box Column Thickness and Foam Relative Density on Energy Absorption, Thin Walled Struct., Vol. 48, No. 7, pp. 482-294.
  12. J. Huh, J. H. Yoon, J. H. Lim, S. H. Park, H. Huh, 2008, Proc. Kor. Soc. Technol. Plast. Conf.(ed. J.S. Lee), Kor. Soc. Technol. Plast., Jeju, Korea, p. 259.
  13. M. G. Lee, H. Ryou, C. Kim, S. J. Kim, K. Chung, 2008, Parametric Study on Crashworthiness of Automotive Sheet Alloy, Metals Mater. Int., Vol. 14, No. 1, pp. 21-31. https://doi.org/10.3365/met.mat.2008.02.021