DOI QR코드

DOI QR Code

평면 프리즘 LED 조명기구 배광수치모델의 다양한 배광 제어를 위한 연구

A Study for the Control of Various Luminous Intensity Distribution in Numerical Model of Planar Prism LED Luminaire

  • 김유신 (세종대학교 건축공학과) ;
  • 최안섭 (세종대학교 건축공학과)
  • 투고 : 2011.10.30
  • 심사 : 2011.12.05
  • 발행 : 2011.12.30

초록

There are several technological problems have to be resolved for LEDs to be used as a general purpose light source. In addition, there are several differences between existing luminaires and the general planer LED luminaire for the intensity distribution. Therefore, the optical engineer then faces the challenging a problem of designing for a spatially extended and non-uniform light source. In the previous studies on the optical design of luminaires, a lot of studies on reflectors and light source have been conducted but the ones on prisms and lenses are insufficient at present. This study developed the numerical model of planar prism LED luminaire to control luminous intensity distribution of LED luminaires. And this study presents an optical calculation process for the prism optical design of a planar prism LED luminaire and a comparison of the simulation results between the developed numerical model and Photopia 2.0 to verify the accuracy of the numerical model. In addition, this study showed a method for the control of various luminous intensity distribution from the developed numerical model.

키워드

참고문헌

  1. F. Vandeghinste, G. Durinck, S. Forment, G. Deconinck, P. Hanselaer, A Narrow Beam Reflector for a Two-Dimensional array of Power Light Emitting Diodes, LEKOS, 4(4) (2008) 243-254.
  2. P. R. Bhattacharjee, Momentum conservation leading to the generalized vectorial laws of reflection and refraction, International journal for Light and Electron Optics, 120 (2009) 642-646. https://doi.org/10.1016/j.ijleo.2008.02.010
  3. P. R. Bhattacharjee, The generalized vectorial laws of reflection and refraction applied to the rotation problems in ray optics, International journal for Light and Electron Optics, 121 (2010) 2128-2132. https://doi.org/10.1016/j.ijleo.2009.07.011
  4. W. Sun, G. Videen, B. Lin, Y. Hu, Q. Fu, Beyond Snel's law: Refraction of a nano-beam of light, Journal of Quantitative Spectroscopy & Radiative Transfer, 112 (2011) 174-176. https://doi.org/10.1016/j.jqsrt.2010.03.009
  5. K. Wandachowicz, K. Domke, Using BRDF for radiance and luminance calculation, Simulation Modeling Practices and Theory, 14 (2006) 641-648. https://doi.org/10.1016/j.simpat.2005.12.001
  6. W. Chen, T. Lai, M. Wang, H. Hung, An optimization system for LED lens design, Expert Systems with Applications 38 (2011) 11976-11983. https://doi.org/10.1016/j.eswa.2011.03.092
  7. Y. C. Lo, K. T. Huang, X. H. Lee, C. C. Sun, Optical design of a Butterfly lens for a street light based on a double-cluster LED, Microelectronics Reliability (2011).
  8. J. Jiang, S. To, W.B. Lee, B. Cheung, Optical design of a freeform TIR lens for LED streetlight, International journal for Light and Electron Optics, 121 (2010) 1761-1765. https://doi.org/10.1016/j.ijleo.2009.04.009
  9. M.S. Huang, C. C. Hung, Y. C. Faang, W. C. Lai, Y. L. Chen, Optical design and optimization of light emitting diode automotive head light with digital micromirror device light emitting diode, International journal for Light and Electron Optics, 121 (2010) 944-952. https://doi.org/10.1016/j.ijleo.2008.12.018
  10. C. J. Li, Y. C. Fang, M.C. Dheng, Prism-pattern design of an LCD light guide plate using a neural-network optical model, International journal for Light and Electron Optics, 121 (2010) 2245-2249. https://doi.org/10.1016/j.ijleo.2009.09.007
  11. C. F. Lin, U. B. Fang, P. H. Yang, Optical film with microstructures array for slim-type backlight applications, International journal for Light and Electron Optics, 122 (2011) 1169-1173. https://doi.org/10.1016/j.ijleo.2010.07.023
  12. IESN, The IESNA Light handbook, 9th ed., Illuminating Engineering Society of North America, 2000.