Abstract
The most typically utilized positioning method in the existing indoor WPS that is a positioning method utilizing distributed wireless network is the finger print. Its positioning is carried out by calculating the difference between the AP information map and WiFi AP signal collected. However, there are problems like low accuracy and high cost when the existing method and the radio map formation are applied to outdoors. In this paper, the characteristics of the existing WPS are surveyed and their problems are examined. In addition, we propose a new WPS using weak signal and a method to construct radio map in order to solve the above problems. And then, the results of experimental test will be analyzed.
산재한 무선 네트워크를 활용하는 WPS(WiFi Positioning System) 측위시스템의 대표적 실내 측위 기법은 핑거프린트이다. Radio map 으로 구성된 AP의 정보와 수집된 AP의 정보 차이를 계산하여 측위를 수행한다. 즉, 저장된 정보와 오차가 가장 적은 위치를 판단하는 연산이다. 그러나 기존의 실내 핑거프린트와 radio map 방식을 실외에 사용할 경우 측위 성능 저하와 비용의 증가 등의 문제점이 발생한다. 본 논문에서는 기존 WPS 측위 시스템의 특징에 대하여 설명하고 기존 핑거프린트 연산의 문제점에 대하여 언급한다. 또한 이를 해결하기 위한 실외 환경의 특징을 적용한 Radio map 구축과 WPS_WS(WiFi Positioning System_Weak Signal) 기법에 대하여 설계 및 구현 결과를 설명한다. 그리고 기존 시스템과 제안한 WPS_WS의 성능을 테스트를 통해 비교하여 이에 대한 결과를 제시한다.