Journal of the Korea Academia-Industrial cooperation Society (한국산학기술학회논문지)

The Korea Academia-Industrial cooperation Society (한국산학기술학회)
권호 표지
DOI QR코드

DOI QR Code

A Study on Performance Improvement of Light and Low-Noisy Standing Grinder with Vacuum Dust Collection Using a Cyclone Separator

사이클론을 활용한 경량.저소음 진공집진 스탠딩 그라인더의 성능개선에 관한 연구

  • Lho, Tae-Jung (Dept. of Mechatronics Engineering, Tongmyong University)
  • 노태정 (동명대학교 메카트로닉스공학과)
  • Received : 2011.08.16
  • Accepted : 2011.11.10
  • Published : 2011.11.30
Download PDF
⟨ Previous Next ⟩

Abstract

A standing grinder with a vacuum dust collection, which works grinding a surface and collecting dust occurred simultaneously, is needed to clean the surface before painting, or to remove a weld bead burr in the industrial field. In recent it trends to be compact and potable with high grinding and dust collection power, and low noise. As increasing these grinding and dust collection power, the noise and weight of standing grinder occurs an important problem. To solve these problem, an efficient cyclone separator was designed and developed by Ansys-CFX analysis and experiments. A weight of the developed grinder part was 5.9kg, which can be easily handled on standing by workers. and a noise level of the developed prototype was measured 69.9 dB(A).

진공집진 스탠딩 그라인더는 그라인딩을 하면서 동시에 발생하는 분진을 집진하는 것으로서, 산업현장에서 도장하기 전에 도장 표면이나 용접 후 비드 부위를 깨끗하게 하기 위하여 필요하다. 최근에 스탠딩 그라인더는 연마 및 분진집진 용량이 커졌으나 반면에 발생소음이 적고 컴팩트하고 포터블화하는 추세이다. 이러한 연마와 집진 성능이 증가함에 따라서 소음과 중량이 중요한 문제로 야기된다. 이러한 문제를 해결하기 위하여 효율적인 사이클론을 Ansys-CFX에 의하여 해석하여 설계하고 실험을 거쳐서 개발되었으며, 그 결과, 그라인더부의 중량은 5.9kg로서 작업자가 충분히 들고 작업을 할 수 있으며, 개발 제품의 소음은 69.9dB(A)로서 좋은 결과를 얻었다.

Keywords

References

  1. K.S. Heo and S.Y Seol, "Numerical Study about Pressure Loss and Collection Efficiency depend on cyclone wall curvature", KSME, Proc. of KSME 2008 Spring Conference, pp. 648-687, 2008.
  2. J.K. Lee, H.P. Ji, O.C. Hyun, S.C. Kim, "Filter Performance Evaluation of the Dust Removal in the Vacuum Air cleaner", KSME, Proc. of KSME 1996 Fall Conference, pp. 408-413, 1996
  3. J.E. Jeong, J.H. Lee, C.O. Chung, G,B, Hwang and J.E. Oh, "Noise reduction of Vacuum Cleaner's Output Noise Using Transfer Path Analysis", KSPE, Proc. of KSPE 2009 Fall Conference, pp.75-76, 2009.
  4. J.H. Kim, T.J. Cho, J.W. Jeong, M.J. Choi and S.G. Lee, "A Study on Acoustic Absorption Efficiency of Vacuum Cleaner by Kinds of Acoustic Absorbent", KSNVE, Proc. of KSNVE 2007 Spring Conference, 2007.
  5. J.W, Jung, T.J. Cho and M.J. Choi, "A Study on Noise and Acoustic Absorption Characteristics of a Vacuum Cleaner on the line of Additional Acoustic Absorbent", KSPE, Proc. of KSPE 2007 Spring Conference, pp.77-78, 2007.