Abstract
Most current design codes of concrete structures adopt the partial safety factor format to assure the proper safety margin or reliability against various limit states as a practical design tool. The safety factors, load and resistance factors and so on, are determined based on the theory of structural reliability, which takes into account the statistical uncertainties of both loads and resistances. The establishment of statistical models for load and resistance should be preceded the application of reliability theory. In this paper, especially the influence of the statistical variations of resistance models, which are described in terms of strength of concrete, strength of reinforcements and sectional dimensions and so on, are examined and the probabilistic models for resistance of reinforced concrete members were developed. The statistical data were collected on local tests and experiments in Korea and the Monte Carlo simulation (MCS) technique was used. The results of this paper may be useful and valuable in calibration of design code in this country.
대부분의 콘크리트구조설계기준은 구조물의 안전에 대한 여유를 확보하기 위해 하중계수 및 저항계수의 안전계수를 고려하고 있다. 이 안전계수는 하중과 저항의 통계적 불확실성을 적절하게 고려한 구조신뢰성 이론에 근거하여 결정되어야 하는데, 구조신뢰성 이론의 적용은 하중 및 저항에 대한 통계적 모델의 정립이 선행되어야 한다. 이 논문에서는 콘크리트 압축강도, 철근 항복강도 및 부재 단면치수의 통계적 변동성을 고려한 철근콘크리트 부재의 저항모델을 개발하였다. 통계모델 개발에 적용된 자료는 국내의 실험 및 시험 자료를 기초로 하였으며, 몬테칼로 시뮬레이션(Monte Carlo Simulation)기법을 적용하였다. 이 논문의 결과는 콘크리트 구조설계 기준의 검증 및 개정작업에 유용한 자료를 제공할 것으로 기대된다.