DOI QR코드

DOI QR Code

Effects of Replacement Ratio of Recycled Coarse Aggregate on the Shear Performance of Reinforced Concrete Beams without Shear Reinforcement

  • 투고 : 2011.09.01
  • 심사 : 2011.10.26
  • 발행 : 2011.10.30

초록

This paper will describe the experimental results on the shear behaviors of reinforced concrete (RC) beam with recycled coarse aggregate (RCA). The primary objective of this research is to evaluate the influences of different RCA replacement percentage (i.e, 0%, 30%, 60%, and 100%) on the shear performance of reinforced concrete beams without shear reinforcement. Eight large-scale RC beams without shear reinforcement were manufactured and tested to shear failure. All had a rectangular cross-section with 400mm width ${\times}$ 600mm depth and 6000mm length, and were tested with a shear span-to-depth of 5.1. The results showed that the deflection and shear strength were little affected by the different RCA replacement percentage. Actual shear strength of each RCA beam was compared with the shear strength predicted using the provisions of ACI 318 code and Zsutty'e equation for shear design of RC beams. ACI 318 code predicted the shear strength of RCA reinforced concrete beams well.

키워드

참고문헌

  1. Korea Ministry of Environment (2007), "Status-of-the-art of occurrence and disposal of wastes in Korea in 2006".
  2. Korea Ministry of Construction and Transportation (2005), "Law for the recycling promotion of construction and demolition wastes".
  3. Korea Agency for Technology and Standards (1997), "Korean industrial Standards", Available online at: http://www.kssn.net/English/
  4. Han, B.C., H.D. Yun and S. Y. Chung (2001), "Shear capacity of reinforced concrete beams made with recycled aggregate", ACI Special publications SP200-31, 503-516.
  5. Belen G. F. and M. A. Fernando (2007), "Shear strength of recycled concrete beams", Construction and Building Materials 21: 887-893. https://doi.org/10.1016/j.conbuildmat.2005.12.018
  6. Sogo, M., T. Sogabe, I. Maruyama, R. Sato and K. Kawai (2004), "Shear behavior of reinforced recycled concrete beams", Proceedings of the International RILEM Conference on the Use of Recycled Materials in Buildings and Structures, Barcelona, Spain, 8-11 November, 610-618.
  7. Xiao, J. Z., J. Li and Zhang, C. (2005), "Mechanical properties of recycled aggregate concrete under uniaxial loading", Cement and Concrete Research, 35: 1187-1194. https://doi.org/10.1016/j.cemconres.2004.09.020
  8. Xiao, J. Z., Y. Sun and H. Falkner (2006), "Seismic performance of frame structures with recycled aggregate concrete", Engineering Structure 28: 1-8. https://doi.org/10.1016/j.engstruct.2005.06.019
  9. Juan, M. S. and P. Gutierrez (2009), "Study on the influence of attached mortar content on the properties of recycled concrete aggregate", Construction and Building Materials 23: 872-877. https://doi.org/10.1016/j.conbuildmat.2008.04.012
  10. Frosch, R. (2000), "Behavior of large-scale reinforced concrete beams with minimum shear reinforcement", ACI Structural Journal, 97(6): 814-820.
  11. ACI Committee 318, "Building code requirements for reinforced concrete (ACI 318-08) and Commentary (318R-08)", American Concrete Institute, Farmington Hills: Mich., 2008.
  12. Zsutty, T. C. (1968), "Beam shear strength prediction by analysis of existing data", ACI Journal, Proceedings 65(11): 942-951.
  13. Elzanaty, A. H., A. H. Nilson, and F. O. Slate (1986), "Shear capacity of reinforced concrete beams using high-strength concrete", ACI Journal, March-April, pp. 290-296.

피인용 문헌

  1. Shear strength of reinforced concrete beams with recycled aggregates pp.2048-4011, 2019, https://doi.org/10.1177/1369433219829815