DOI QR코드

DOI QR Code

Effect of Ethanol Content on Fine Soot Particle Emission from a Diesel-Ethanol Blended Fuel Diesel Engine

디젤-에탄올 혼합연료의 에탄올 함량이 미세 그을음(Soot) 입자 배출특성에 미치는 영향

  • Park, Su-Han (Dept. of Mechanical Engineering, Graduate School of Hanyang Univ.) ;
  • Cha, June-Pyo (Dept. of Mechanical Engineering, Graduate School of Hanyang Univ.) ;
  • Kwon, Seok-Ju (Dept. of Mechanical Engineering, Graduate School of Hanyang Univ.) ;
  • Park, Sung-Wook (Dept. of Mechanical Engineering, Hanyang Univ.) ;
  • Lee, Chang-Sik (Dept. of Mechanical Engineering, Hanyang Univ.)
  • 박수한 (한양대학교 대학원 기계공학과) ;
  • 차준표 (한양대학교 대학원 기계공학과) ;
  • 권석주 (한양대학교 대학원 기계공학과) ;
  • 박성욱 (한양대학교 기계공학과) ;
  • 이창식 (한양대학교 기계공학과)
  • Received : 2011.05.13
  • Accepted : 2011.07.30
  • Published : 2011.12.01

Abstract

The purpose of this study is to investigate the effect of ethanol content on the emission of nanosized particles from a diesel-ethanol blended fuel engine. The engine combustion and exhaust emission characteristics of a singlecylinder diesel engine were analyzed using an emission analyzer and an SMPS(scanning mobility particle sizer). The analysis revealed that soot emission increased with the ignition delay. When the ignition delay was fixed, an increase in the ethanol content caused a decrease in the soot emission. With an increase in the ethanol blending ratio, the number concentration and mass distribution of nanosized particles generally decreased. However, for 30% ethanol blending, large particles were observed because of the agglomeration of soot particles, and consequently, the particle mass increased.

본 연구의 목적은 디젤-에탄올 혼합연료로 운전되는 디젤엔진에서 에탄올 혼합비율이 나노 크기 입자 배출 특성에 미치는 영향을 분석하는 것이다. 엔진의 연소 및 배기 배출물 특성은 배기량 373cc 의 단기통 디젤엔진과 배기 배출물 측정 장치, SMPS 를 이용하여 실험하였다. 그을음(soot) 배출은 착화지연 기간이 길어짐에 따라 증가하였다. 에탄올 혼합비율이 증가함에 따라 나노 입자의 총 개수 및 질량은 대체로 감소하는 경향을 나타냈다. 그러나 에탄올이 30% 혼합되었을 때 그을음(soot) 입자의 응결로 인해 큰 입자의 수 분포가 증가하였으며, 질량 또한 크게 증가하였다.

Keywords

References

  1. Choi, N. H., Kim, K. S., Jang, B. J. and Kim, K. A., 2005, "Defining the Mechanism of Pulmonary Disease Induced by Air-Borne Particulate Matters and Development of Treatment Methods," KOSEF.
  2. Kasper, M., 2004, "The Number Concentration of Nonvolatile Particles Design Study for an Instrument According to the PMP Recommendation," SAE technical paper, SAE 2004-01-0960.
  3. Kim, S., Lee, J., Kim, G., Cho, N., Sung, Y. and Jeong, Y., 2005, "Measurement of Size Distribution of Diesel Particles: Effects of Instruments, Dilution Methods, and Measuring Positions," International Journal of Automotive Technology, Vol. 6, No. 2, pp.119-124.
  4. Kim, H., and Choi, B., 2008, "Effect of Ethanol- Diesel Blend Fuels on Emission and Particle Size Distribution in a Common-Rail Direct Injection Diesel Engine with Warm-up Catalytic Converter," Renewable Energy, Vol. 33, pp.2222-2228. https://doi.org/10.1016/j.renene.2008.01.002
  5. Pang, X., Shi, X., Mu, Y., He, H., Shuai, S., Chen, H., and Li, R., 2006, "Characteristics of Carbonyl Compounds Emission from a Diesel-Engine Using Biodiesel-Ethanol-Diesel as Fuel," Atmospheric Environment, Vol. 40, pp.7057-7065. https://doi.org/10.1016/j.atmosenv.2006.06.010
  6. Leahey, D. M., Jones, B. C., Gilligan, J. W., Brown L. P., Hamilton, L. J., Gutteridge, C. E., Cowart, J. S., and Caton, P. A., 2007, "Combustion of Biodiesel- and Ethanol-Diesel Mixtures with Intake Injection," SAE technical paper, SAE 2007-01-4011.
  7. Lee, J., Patel, R., and Ladommatos, N., 2009, "Emission Characteristics of Nano-Sized Particles in Bio-Ethanol Fuelled Engine with Different Injection Type," Transaction of KSAE, Vol. 17, No. 4, pp. 55-62.
  8. Moon, G., Lee, Y., Choi, K., and Jeong, D., 2009, "An Experimental Study on the Combustion and Emission Characteristics of Blends of GTL/Biodiesel in Diesel Engine," Transaction of KSAE, Vol. 17, No. 5, pp.39-45.
  9. Ko, A., Hwang, I. G., Myung, C., Park, S., and Choi, H., 2010, "Study of Particle Emission Contour Construction & Characteristics and Reduction Efficiency of Exhaust-Treatment System of Diesel Engine," Transaction of KSME (B), Vol. 24, No. 8, pp.755-760. https://doi.org/10.3795/KSME-B.2010.34.8.755
  10. Lee, M., Park, J., Kim, J., Jung, C., and Cha, K., 2009, "The Study on the PM Particle Characteristics of Vehicle According to the Fuel Type and Test Mode," KSAE 2009 Annual Conference, KSAE09-A0113.
  11. Park, S. H., Kim, S. H., and Lee, C. S., 2009, "Mixing Stability and Spray Behavior Characteristics of Diesel- Ethanol-Methyl Ester Blended Fuels in a Common-Rail Diesel Injection System," Energy&Fuels, Vol. 23, pp.5228-5235.
  12. Rakopoulos, C. D., and Giakoumis, E. G., 2009, Diesel Engine Transient Operation - Principles of Operation and Simulation Analysis, Springer, London, pp.149-155.
  13. Eastwood, P., 2008, Particulate Emissions from Vehicles, John Wiley & Sons Ltd., Chichester, pp.144, 391-394.