대한금속재료학회지 (Korean Journal of Metals and Materials)

  • 제48권1호
  • /
  • Pages.39-48
  • /
  • 2010
  • /
  • 1738-8228(pISSN)
  • /
  • 2288-8241(eISSN)
대한금속재료학회 (The Korean Institute of Metals and Materials)
권호 표지
DOI QR코드

DOI QR Code

ASTM Gr.92강의 미세조직 및 기계적 성질에 미치는 템퍼링 온도 및 열처리경로의 영향

Effects of Tempering Temperature and Heat-Treatment Path on the Microstructural and Mechanical Properties of ASTM Gr.92 Steel

  • 김연근 (충남대학교/응용소재공학과) ;
  • 한창희 (한국원자력연구원/SFR핵연료개발) ;
  • 백종혁 (한국원자력연구원/SFR핵연료개발) ;
  • 김성호 (한국원자력연구원/SFR핵연료개발) ;
  • 이찬복 (한국원자력연구원/SFR핵연료개발) ;
  • 홍순익 (충남대학교/응용소재공학과)
  • Kim, Yeon-Keun (Energy Functional Material Laboratory, Chungnam National Universty) ;
  • Han, Chang-Hee (FR Fuel Development, Korea Atomic Energy Research institute) ;
  • Baek, Jong-Hyuk (FR Fuel Development, Korea Atomic Energy Research institute) ;
  • Kim, Sung-Ho (FR Fuel Development, Korea Atomic Energy Research institute) ;
  • Lee, Chan-Bock (FR Fuel Development, Korea Atomic Energy Research institute) ;
  • Hong, Sun-Ig (Energy Functional Material Laboratory, Chungnam National Universty)
  • 투고 : 2009.08.20
  • 발행 : 2010.01.20
⟨ 이전 논문 다음 논문 ⟩

초록

In order to investigate the effects of tempering temperature and heat-treatment path on the microstructural and mechanical properties of ASTM Gr.92 steels, four samples with different tempering temperatures and heat-treatment paths wer prepared. THeree experimental steels showed tempered martensitic microstructures, but the sample tempered at $810^{\circ}C$ was presumed to retain partially untempered martensitic microstructures due to a lower ${\alpha}$+${\gamma}$ phase regime. $M_{23}C_6$, V(C,N), and Nb(C,N) precipitates were observed in all samples. In addition $Cr_2N$ was observed to be precipitated finely and uniformly by isothermal heat-treatment. The lath width and precipitate size in the isothermal heat-treated samples were much smaller than those of the tempered-only specimens. Because of a fine and uniform precipitate, a reduction of lath width would enhance precipitation hardeing, and it was shown that mechanical propertiesincluding the hardness and tensile properties of the steels were improved by isothermal heat-treatment.

키워드

과제정보

연구 과제번호 : 소듐냉각고속로(SFR) 핵연료핵심기반기술개발

연구 과제 주관 기관 : 교육과학기술부

참고문헌

  1. W. R. Corwin, Nuel. Eng. & Tech. 38, 591 (2006)
  2. C. B. Lee and D. H. Hahn, Trans. of the Korean Nuclear Society Spring Meeting, The Korean Nuclear Society, Chunchen, Korea, May 5-26 (2006)
  3. D.C. Crawford, D. L. Porter, and S.L. Hayes, J. Nuel. Mater. 371, 202 (2007) https://doi.org/10.1016/j.jnucmat.2007.05.010
  4. R. L. Klueh and A. T. Nelson, J. Nuel. Mater. 371, 37 (2007) https://doi.org/10.1016/j.jnucmat.2007.05.005
  5. K. Maruyama, K. Sawada, and J. Koike, ISIJ. Int. 41, 6 (2001)
  6. M. A. Yescas and P. F. Morris, ECCC Creep Conference, p. 143, London, UK. 12-14, September (2005)
  7. F. B. Pickering, Microstructural development and stability in high chromuim ferritic power plant steels, ed. by A. Strang and D. J. Gooch, p.1. The Institute of Materials, London (1997)
  8. L. Lundin, S. Fallman, and H. O. Andren, Mater. Sci. & Tech. 13, 233 (1997) https://doi.org/10.1179/026708397790302485
  9. B. Vandenberghe, J. Gobrel, and C. Zakine, New Materials Seminar, London, UK, 20-21, June (2007)
  10. S. H. Kim, B. J. Song, and W. S. Ryu, J. Kor. Inst. Met. & Mater. 39, 410 (2001)
  11. J. Orr and L. Woollard, Microstructural development and stability in high chromuim ferritic power plant steels, ed. by A. Strang and D. J. Gooch, p.53. The Institute of Materials, London (1997)
  12. K. Sawada, K. Suzuki, H. Kushima, M. Tabuchi, and K. Kimura, Mater. Sci. & Eng. A. 480, 558 (2008) https://doi.org/10.1016/j.msea.2007.09.031
  13. K. Sawada, M. Tancike, K. Kimura, and F. Abe, ISIJ. Int. 44, 1243 (2004) https://doi.org/10.2355/isijinternational.44.1243
  14. J. W. Simmons, B. S. Covino, Jr. J. A. Hawk, and J. S. Dunning, ISIJ. Int. 36, 846 (1996) https://doi.org/10.2355/isijinternational.36.846
  15. S. G. Hong, W. B. Lee, and C. G. Park, J. Kor. Inst. Met. & Mater. 36, 9 (1998)
  16. A. Zielinska-Lipice, A.Czyrska-Filemonowicz, P. J. Ennis, and O. Wachter, J. Mater. Proc. Tech. 64, 397 (1997) https://doi.org/10.1016/S0924-0136(96)02591-5
  17. J. Orr and D. Burton, Materials For Advanced Power Engineering, ed. by D. Coutsouradis et al., p.263, Kluwer Academic Publishers, Netherlands (1994)
  18. F. Abe, Creep-resistant steels, ed. by F. Abe, Torsten-Ull Kern and R. Viswanathan, p.279, Woodhead publishing, Cambridge, England (2008)
  19. F. Abe, T. Noda, H. Araki, and S. Nakazawa, J. Nuel. Mater. 663, 179 (1991)
  20. Y. Tsuchida, K. Okamotoa, and Y. Tokunaga, ISIJ. Int. 35, 317 (1995) https://doi.org/10.2355/isijinternational.35.317