Structural Engineering and Mechanics

  • 제35권4호
  • /
  • Pages.431-457
  • /
  • 2010
  • /
  • 1225-4568(pISSN)
  • /
  • 1598-6217(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Semi-rigid connection modeling for steel frameworks

  • Liu, Yuxin (ACR Civil & Layout, Atomic Energy of Canada Limited (AECL))
  • 투고 : 2007.10.29
  • 심사 : 2010.02.08
  • 발행 : 2010.07.10
⟨ 이전 논문 다음 논문 ⟩

초록

This article provides a discussion of the mathematic modeling of connections for designing and qualifying structures, systems, and components subject to monotonic or cyclic loading. To characterize the force-deformation behavior of connections under monotonic loading, a review of the Ramberg-Osgood, Richard-Abbott, and Menegotto-Pinto models is conducted, and it is shown that these nonlinear functions can be mathematically derived by scaling up or down a linear force-deformation function. A generalized four-parameter model for simulating connection behavior is investigated to facilitate nonlinear regression analysis. In order to perform seismic analysis of frameworks, a hysteretic model accounting for loading, unloading, and reloading is described using the established monotonic model. For preliminary analysis, a method is provided to quickly determine the model parameters that fit approximately with the observed data. To reach more accurate values of the parameters, the methods of nonlinear regression analysis are investigated and the modified Levenberg-Marquardt and separable nonlinear least-square algorithms are applied in determining the model parameters. Example case studies illustrate the procedure for the computation through the use of experimental/analytical data taken form the literature. Transformation of connection curves from the three-parameter model to the four-parameter model for structural analysis is conducted based on the modeling of connections subject to fire.

키워드

참고문헌

  1. AISC (2005), Specification for Structural Steel Buildings, ANSI/AISC 360-05, American Institute of Steel Construction, Inc., Chicago, Illinois.
  2. Al-Jabri, K.S., Burgess, I.W., Lennon, T. and Plank, R.J. (2005), "Moment-rotation-temperature curves for semirigid joints", J. Construct. Steel Res., 61(2), 281-303. https://doi.org/10.1016/j.jcsr.2004.09.001
  3. Attiogbe, E. and Morris, G. (1991), "Moment-rotation functions for steel connections", J. Struct. Eng-ASCE, 117(6), 1703-1718. https://doi.org/10.1061/(ASCE)0733-9445(1991)117:6(1703)
  4. Barnett, T.C., Tizani, W. and Nethercot, D.A. (2001), "The practice of blind bolting connections to structural hollow sections: A review", Steel Compos. Struct., 1(1), 1-16. https://doi.org/10.1296/SCS2001.01.01.01
  5. Baniotopoulos, C.C. and Wald, F. (2000), The Paramount Role of Joints into the Reliable Response of Structures, Kluwer Academic Publishers, Dordrecht, TheNetherlands.
  6. CEN (2005), Eurocode 3: Design of Steel Structures, Part 1-8 – Design of Joints, European Committee for Standardadization, EN 1993-1-8, Brussels, Belgium.
  7. Chan, S.L. and Chui, P.P.T. (2000), Non-linear Static and Cyclic Analysis of Steel Frames with Semi-rigid Connections, Elsevier Science Ltd., Kidlinton, Oxford, UK.
  8. Chen, K.M.G., Weckman, E.J., Liu, Y. and Grierson, D.E. (2010), "Analysis of steel frameworks subject to fire", Proceedings of the Sixth International Conference on Structures in Fire (SiF 10), Michigan, June.
  9. Chen, W.F., Goto, Y. and Liew, J.Y.R. (1996). Stability design of semi-rigid frames, John Wiley & Sons, Inc., New York.
  10. CSA-S16-09 (2009), Design of Steel Structures, National Standard of Canada, Canadian Standard Association, Mississauga, Ontario, Canada.
  11. Dennis, J.E., Gay, D.M. and Welsch, R.E. (1981), "Algorithm 573: NL2SOL-An adaptive nonlinear leastsquares algorithm [E4]", ACM T. Math. Software, 7(3), 369-383. https://doi.org/10.1145/355958.355966
  12. Elremaily, A. and Azizinamini, A. (2001), "Experimental behaviour of steel beam to CFT column connections", J. Construct. Steel Res., 57(10), 1099-1119. https://doi.org/10.1016/S0143-974X(01)00025-6
  13. El-Rimawi, J.A., Burgess, I.W. and Plank, R.J. (1997), "The influence of connections stiffness and behaviour of steel beams in fire", J. Construct. Steel Res., 43(1-3), 1-15. https://doi.org/10.1016/S0143-974X(97)00047-3
  14. Elnashai, A.S., Elghazouli, A.Y. and Denesh-Ashtiani, F.A. (1998), "Response of semi-rigid steel frames to cyclic and earthquake loads", J. Struct. Eng., 124(8), 857-867. https://doi.org/10.1061/(ASCE)0733-9445(1998)124:8(857)
  15. Faella, C., Piluso, V. and Rizzano, G. (2000), Structural Steel Semi-rigid Connections-theory, Design and Software, CRC Press, Boca Raton.
  16. Faria, R., Oliver, J. and Cervera, M. (2004), "Modeling material failure in concrete structures under cyclic actions", J. Struct. Eng-ASCE, 130(12), 1997-2005. https://doi.org/10.1061/(ASCE)0733-9445(2004)130:12(1997)
  17. FEMA-403 (2002), World Trade Center Building Performance Study: Data Collection, Preliminary Observations and Recommendation, Federal Emergency Management Agency (FEMA) Region II, New York, N.Y. USA.
  18. Frye, M.J. and Morris, GA. (1975), "Analysis of flexibly connected steel frames", Can. J. Civil Eng., 2(3), 280-291. https://doi.org/10.1139/l75-026
  19. Golub, G. and Pereyra, V. (2003), "Separable nonlinear least squares: the variable projection method and its applications", Inverse Probl., 19, 1-26. https://doi.org/10.1088/0266-5611/19/1/301
  20. Gong, Y. (2009), "Single-angle all-bolted shear connections", J. Construct. Steel Res., 65(6), 1337-1345. https://doi.org/10.1016/j.jcsr.2008.12.002
  21. Gong, Y. and Gillies, A. (2008), "Double-angle shear connections with short outstanding legs", Can. J. Civil Eng., 35(8), 786-795. https://doi.org/10.1139/L08-022
  22. Goverdham, A.V. (1983), A Collection of Experimental Moment-rotation Curves and Evaluation of Prediction Equations for Semi-rigid Connections, Master's Thesis, Vanderbilt University, Nashville, TN.
  23. Huber, G. (2001), "Semi-continuous beam-to-column joints at the Millennium Tower in Vienna, Austria", Steel Compos. Struct., 1(2), 159-170. https://doi.org/10.1296/SCS2001.01.02.01
  24. Kirby, B.R. (2001), "The behaviour of high-strength grade 8.8 bolts in fire", J. Construct. Steel Res., 33(1-2), 3-37.
  25. Kishi, N. and Chen, W.F. (1986), Data base of Steel Beam-to-column Connections, Report No. CE-STR-86-26, School of Civil Engineering, Purdue University, West Lafayette, Indiana.
  26. Kishi, N., Komuro, M. and Chen, W.F. (2004), "Four-parameter power model for M-er curves of end-plate connections", Proceedings of ECCS/AISC Workshop Connections in Steel Structures V: Innovative Steel Connections, Amsterdam, The Netherlands, June.
  27. Kishi, N. and Chen, W.F. (1990), "Moment-rotation relations of semi-rigid connections with angles", J. Struct. Eng-ASCE, 116(7), 1813-1834. https://doi.org/10.1061/(ASCE)0733-9445(1990)116:7(1813)
  28. Krishnamurthy, N., Huang, H., Jeffrey, P.K. and Avery, L.K. (1979), "Analytical $M-{\theta}$ curves for end-plate connections", J. Struct. Div-ASCE, 105(1), 133-145.
  29. Hibbeler, R.C. (2004), Statics and Mechanics of Materials, 2nd Edition, Prentice-Hall, Inc., New Jersey.
  30. Hsieh, S.H. and Delerlein, G.G. (1990), "Nonlinear analysis of three-dimensional steel frames with semi-rigid connections", Comput. Struct., 41(5), 995-1009.
  31. Langdon, G.S. and Schleyer, G.K. (2004), "Modelling the response of semi-rigid supports under combined loading", Eng. Struct., 26, 511-517. https://doi.org/10.1016/j.engstruct.2003.12.001
  32. Lee, Y.L. and Melchers, R.E. (1986), "Moment-rotation curves for bolted Connections", J. Struct. Eng-ASCE, 112(3), 615-635. https://doi.org/10.1061/(ASCE)0733-9445(1986)112:3(615)
  33. Li, G.Q. and Guo, S.X. (2008), "Experiment on restrained steel beams subjected to heating and cooling", J. Construct. Steel Res., 64(3), 268-274. https://doi.org/10.1016/j.jcsr.2007.07.007
  34. Liew, J.Y.W., Yu, C.H., Ng, Y.H. and Shanmugam, N.E. (1997), "Testing of semi-rigid unbraced frame for calibration of second-order inelastic analysis", J. Construct. Steel Res., 41(2/3), 159-195. https://doi.org/10.1016/S0143-974X(97)00009-6
  35. Lipson, S.L. (1968), "Single-angle and single-plate beam framing connections", Proceedings of the Canadian Structural Engineering Conference, Canadian Steel Industries Construction Council, Canada.
  36. Liu, T.C.H. (1996), "Finite element modeling of behaviour of steel beam and connections in fire", J. Construct. Steel Res., 36(2), 181-199. https://doi.org/10.1016/0143-974X(95)00016-O
  37. Liu, Y. and Xu, L. (2005), "Storey-based stability analysis of multi-storey unbraced frames", Struct. Eng. Mech., 19(6), 679-705. https://doi.org/10.12989/sem.2005.19.6.679
  38. Liu, Y., Xu, L. and Grierson, D.E. (2008), "Compound-element modelling accounting for semi-rigid connections and member plasticity", Eng. Struct., 30(5), 1292-1307. https://doi.org/10.1016/j.engstruct.2007.07.026
  39. Liu, Y. (2009), "Hybrid member stiffness matrix accounting for geometrical nonlinearity and member inelasticity in semi-rigid frameworks", Eng. Struct., 31(12), 2880-2895. https://doi.org/10.1016/j.engstruct.2009.07.014
  40. Liu, Y., Xu, L. and Grierson, D.E. (2010), "Influence of Semi-rigid Connections and local joint damage on progressive collapse of steel frameworks", J. Comput. Aid. Civil Infrast. Eng., 25(3), 184-204. https://doi.org/10.1111/j.1467-8667.2009.00616.x
  41. Liu, Y. and Lu, Z. (2010), "Methods of enforcing earthquake base motions in seismic analysis of structures", Eng. Struct. (in press)
  42. Lui, E.M. and Chen, W.F. (1986), "Analysis and behaviour of flexibly-jointed frames", Eng. Struct., 8(2), 107-115. https://doi.org/10.1016/0141-0296(86)90026-X
  43. Menegotto, M. and Pinto, P. (1973), "Method of analysis for cyclically loaded reinforced concrete plane frames including changes in geometry and non-elastic behavior of elements under combined normal force and bending", Proceedings of the IABSE Symposium on Resistance and Ultimate Deformability of Structures Acted on by Well-Defined Repeated Loads, Final Report, Lisbon.
  44. MINPACK (1999), http://www.netlib.org/minpack/.
  45. Nethercot, D.A. (1985), "Utilization of experimentally obtained connection data in assessing the performance of steel frames", Connection Flexibility and Steel Frames, Ed. Chen, W.F., ASCE, Detroit.
  46. Nogueiro, P., Simões da Silva, L., Bento, R. and Simões, R. (2009), "Calibration of model parameters for the cyclic response of end-plate beam-to-column steel-concrete composite joints", Steel Compos. Struct., 9(1), 39-58. https://doi.org/10.12989/scs.2009.9.1.039
  47. Pucinotti, R. (2006), "Cyclic mechanical model of semi-rigid top and seat and double web angle connections", Steel Compos. Struct., 6(2), 139-157. https://doi.org/10.12989/scs.2006.6.2.139
  48. Richard, R.M. and Abbott, B.J. (1975), "Versatile elastic-plastic stress-strain formula", J. Eng. Mech. Div., 101(4), 511-515.
  49. Ramberg, W. and Osgood, W.R. (1943), "Description of Stress-strain curves by three parameters", Technical Note No. 902, National Advisory Committee for Aeronautics, Washington, D.C.
  50. Rathbun, J.C. (1936), "Elastic properties of riveted connections", Trans., ASCE, 101, 524-563.
  51. Sherbourne, A.N. and Bahaari, M.R. (1997), "Finite element prediction of end plate bolted connection behavior. I: Parametric study", J. Struct. Eng-ASCE, 123(2), 157-164. https://doi.org/10.1061/(ASCE)0733-9445(1997)123:2(157)
  52. Sakumoto, Y., Keira, K., Furumura, F. and Ave, T. (1993), "Tests of fire-resistance bolts and joints", J. Struct. Eng., 119(11), 3131-3150. https://doi.org/10.1061/(ASCE)0733-9445(1993)119:11(3131)
  53. Saravanan, M., Arul Jayachandran, S., Marimuthu, V. and Prabha, P., (2009), "Advanced analysis of cyclic behaviour of plane steel frames with semi-rigid connections", Steel Compos. Struct., 9(4), 381-395. https://doi.org/10.12989/scs.2009.9.4.381
  54. Simoes da Silva, L., de Lima, L.R.O., da S. Vellasco, P.C.G. and de Andrade S.A.L. (2004), "Behaviour of flush end-plate beam-to-column joints under bending and axial force", Steel Compos. Struct., 4(2), 77-94. https://doi.org/10.12989/scs.2004.4.2.077
  55. Simoes da Silva, L., Santiago, A., Vila Real, P. and Moore, D. (2005), "Behaviour of steel joints under fire loading", Steel Compos. Struct., 5(6), 485-513. https://doi.org/10.12989/scs.2005.5.6.485
  56. Simoes da Silva, L. (2008), "Towards a consistent design approach for steel joints under generalized loading", J. Construct. Steel Res., 64(9), 1059-1075. https://doi.org/10.1016/j.jcsr.2008.02.017
  57. Simoes, R., Simoes da Silva, L., Cruz, P., Wald, F. and Baniotopoulos, C.C. (1999), "Numerical modelling of column base connection", Proceedings of COST C1 Conference Liège 1998, Ed. Maquoi, R., Brussels.
  58. Xu, L. (1994), Optimal Design of Steel Frameworks with Semi-rigid Connection, Ph.D. Thesis, Department of Civil Engineering, University of Waterloo, ON, Canada.
  59. Yang, C.M. and Kim, Y.M. (2007), "Cyclic behaviour of beam-column connections in steel portals", Proc. ICE., Struct. Build., 160(5), 259-272. https://doi.org/10.1680/stbu.2007.160.5.259
  60. Zoetemeijer, P. (1983), Proposal for Standardisation of Extended End Plate Connection based on Test results - Test and Analysis, Rep. No. 6-83-23, Steven Laboratory, Delft.

피인용 문헌

  1. Moment-Rotation Model for Blind-Bolted Flush End-Plate Connections in Composite Frame Structures vol.141, pp.9, 2015, https://doi.org/10.1061/(ASCE)ST.1943-541X.0001147
  2. Evaluation of energy response of space steel frames subjected to seismic loads vol.54, pp.4, 2015, https://doi.org/10.12989/sem.2015.54.4.809
  3. Seismic Performance and Storey-Based Stability of Suspended Buildings vol.17, pp.10, 2014, https://doi.org/10.1260/1369-4332.17.10.1531
  4. Seismic behavior of suspended building structures with semi-rigid connections vol.7, pp.4, 2014, https://doi.org/10.12989/eas.2014.7.4.415
  5. An Investigation of the Effect of Semi-rigid Connections on Sudden Column Removal in Steel Frames vol.13, 2018, https://doi.org/10.1016/j.istruc.2017.12.001
  6. An accurate substructural synthesis approach to random responses vol.39, pp.1, 2010, https://doi.org/10.12989/sem.2011.39.1.047
  7. Ductility demands and reduction factors for 3D steel structures with pinned and semi-rigid connections vol.16, pp.4, 2010, https://doi.org/10.12989/eas.2019.16.4.469