Structural Engineering and Mechanics

Techno-Press (테크노프레스)
권호 표지
DOI QR코드

DOI QR Code

Optimal design of a new seismic passive protection device made in aluminium and steel

  • Foti, Dora (Dipartimento di Ingegneria Civile e Ambientale, Politecnico di Bari) ;
  • Diaferio, Mariella (Dipartimento di Ingegneria Civile e Ambientale, Politecnico di Bari) ;
  • Nobile, Riccardo (Dipartimento di Ingegneria dell'Innovazione, Universita del Salento)
  • Received : 2009.02.11
  • Accepted : 2009.09.10
  • Published : 2010.05.10
⟨ Previous Next ⟩

Abstract

Keywords

References

  1. Foti, D. and Diaferio, M. (1999), "Shear panels for seismic protection of buildings", Proceedings of Structural Dynamics – EURODYN '99, Balkema, Rotterdam.
  2. Foti, D. and Nobile, R. (2000), Characterization Tests of New Aluminium and Steel Energy Dissipating Devices, Identification, Control and Optimisation of Engineering Structures, (Eds. G. De Roeck and B.H.V. Topping), Civil-Comp Press, Edinburgh.
  3. Kajima Corporation, (1991), Honeycomb Damper Systems.
  4. Rai, D.C. and Wallace, B.J. (1998), "Aluminium shear-link for enhanced seismic resistance", Earthq. Eng. Struct. D., 27, 315-342. https://doi.org/10.1002/(SICI)1096-9845(199804)27:4<315::AID-EQE703>3.0.CO;2-N

Cited by

  1. A new performance index of LQR for combination of passive base isolation and active structural control vol.157, 2018, https://doi.org/10.1016/j.engstruct.2017.11.070
  2. Dynamic behavior of new aluminum-steel energy dissipating devices vol.20, pp.7, 2013, https://doi.org/10.1002/stc.1557
  3. Motion control-based seismic retrofit solutions for a R/C school building designed with earlier Technical Standards vol.12, pp.6, 2014, https://doi.org/10.1007/s10518-014-9616-y
  4. Experimental Study and Numerical Simulation of a Laminated Reinforced Concrete Shear Wall with a Vertical Seam vol.7, pp.6, 2017, https://doi.org/10.3390/app7060629
  5. Design and Experimental Validation of a Re-centring Viscous Dissipater vol.13, 2018, https://doi.org/10.1016/j.istruc.2017.12.008
  6. On the Seismic Response of Protected and Unprotected Middle-Rise Steel Frames in Far-Field and Near-Field Areas vol.2014, 2014, https://doi.org/10.1155/2014/393870
  7. Nonlinear seismic analysis of r.c. framed buildings with setbacks retrofitted by damped braces vol.126, 2016, https://doi.org/10.1016/j.engstruct.2016.07.055
  8. Effectiveness of damped braces to mitigate seismic torsional response of unsymmetric-plan buildings vol.85, 2017, https://doi.org/10.1016/j.ymssp.2016.09.003
  9. Shear modelling of the beam-column joint in the nonlinear static analysis of r.c. framed structures retrofitted with damped braces 2017, https://doi.org/10.1007/s10518-017-0269-5
  10. Viscoelastic frictional properties of rubber-layer roller bearings (RLRB) seismic isolators vol.52, pp.11-12, 2017, https://doi.org/10.1007/s11012-016-0612-y
  11. Mechanical behavior of buildings subjected to impulsive motions vol.14, pp.3, 2016, https://doi.org/10.1007/s10518-015-9848-5
  12. Equivalent viscous damping for displacement-based seismic design of hysteretic damped braces for retrofitting framed buildings vol.12, pp.6, 2014, https://doi.org/10.1007/s10518-014-9601-5
  13. Seismic vulnerability and retrofitting by damped braces of fire-damaged r.c. framed buildings vol.101, 2015, https://doi.org/10.1016/j.engstruct.2015.07.027
  14. Experimental Study of Hysteretic Steel Damper for Energy Dissipation Capacity vol.2015, 2015, https://doi.org/10.1155/2015/631726
  15. Seismic Response of a Historic Masonry Construction Isolated by Stable Unbonded Fiber-Reinforced Elastomeric Isolators (SU-FREI) vol.628, pp.1662-9795, 2014, https://doi.org/10.4028/www.scientific.net/KEM.628.160
  16. Energy-Based Design Criterion of Dissipative Bracing Systems for the Seismic Retrofit of Frame Structures vol.8, pp.2, 2018, https://doi.org/10.3390/app8020268
  17. Rolling devices for seismic isolation of lightweight structures and equipment. Design and realization of a prototype vol.26, pp.3, 2018, https://doi.org/10.1002/stc.2311
  18. Seismic retrofitting of gravity-loads designed r.c. framed buildings combining CFRP and hysteretic damped braces vol.17, pp.6, 2019, https://doi.org/10.1007/s10518-019-00593-5
  19. Activation control extension of a design method of fluid viscous dissipative bracing systems vol.18, pp.8, 2010, https://doi.org/10.1007/s10518-020-00849-5
  20. A Dissipating Frames for Seismic Retrofitting and Building Energy-Efficiency vol.5, pp.9, 2010, https://doi.org/10.3390/infrastructures5090074
  21. Roof Isolation and Girder-to-Column Dissipative Connections in Seismic Design of Precast R/C Structures vol.5, pp.11, 2020, https://doi.org/10.3390/infrastructures5110104
  22. Evaluation of Structural Behavior of Hysteretic Steel Dampers under Cyclic Loading vol.10, pp.22, 2020, https://doi.org/10.3390/app10228264
  23. Energy Dissipation in Frame Structures using Sliding Lever Mechanism Technique vol.15, pp.1, 2010, https://doi.org/10.2174/1874836802115010001
  24. Structural Performance of R-Type Steel Damper Used in Reinforced Concrete Members vol.11, pp.14, 2021, https://doi.org/10.3390/app11146404
  25. Tensile stress effect on crack depth quantification in ferromagnetic materials using ECPT vol.182, pp.None, 2021, https://doi.org/10.1016/j.measurement.2021.109740
  26. In-plane and out-of-plane nonlinear seismic response of masonry infills for hospitals retrofitted with hysteretic damped braces vol.148, pp.None, 2010, https://doi.org/10.1016/j.soildyn.2021.106803