Structural Engineering and Mechanics

  • 제34권6호
  • /
  • Pages.685-702
  • /
  • 2010
  • /
  • 1225-4568(pISSN)
  • /
  • 1598-6217(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Nonlinear dynamic analysis of reinforced concrete shell structures

  • Kim, T.H. (Civil Engineering Research Team, Daewoo Institute of Construction Technology) ;
  • Park, J.G. (Department of Civil and Environmental Engineering, Sungkyunkwan University) ;
  • Choi, J.H. (Department of Civil Engineering, Hankyong National University) ;
  • Shin, H.M. (Department of Civil and Environmental Engineering, Sungkyunkwan University)
  • 투고 : 2008.07.14
  • 심사 : 2009.12.23
  • 발행 : 2010.04.20
⟨ 이전 논문 다음 논문 ⟩

초록

In this paper, a nonlinear finite element procedure is presented for the dynamic analysis of reinforced concrete shell structures. A computer program, named RCAHEST (Reinforced Concrete Analysis in Higher Evaluation System Technology), was used. A 4-node flat shell element with drilling rotational stiffness was used for spatial discretization. The layered approach was used to discretize the behavior of concrete and reinforcement in the thickness direction. Material nonlinearity was taken into account by using tensile, compressive and shear models of cracked concrete and a model of reinforcing steel. The smeared crack approach was incorporated. The low-cycle fatigue of both concrete and reinforcing bars was also considered to predict a reliable dynamic behavior. The solution to the dynamic response of reinforced concrete shell structures was obtained by numerical integration of the nonlinear equations of motion using Hilber-Hughes-Taylor (HHT) algorithm. The proposed numerical method for the nonlinear dynamic analysis of reinforced concrete shell structures was verified by comparison of its results with reliable experimental and analytical results.

키워드

참고문헌

  1. ACI (2001), Finite Element Analysis of Reinforced Concrete Structures, Farmington Hills, MI.
  2. ASCE (1993), "Finite element analysis of reinforced concrete structures", Proceedings of the International Workshop, New York, June.
  3. ASCE (2001), Modeling of Inelastic Behavior of RC Structures Under Seismic Loads, ASCE, Reston.
  4. Clough, W. and Penzien, J. (1975), Dynamic of Structures, McGraw-Hill, New York.
  5. Hughes, T.J.R. (2000), The Finite Element Method, Prentice-Hall.
  6. Kakuta, Y., Okamura, H. and Kohno, M. (1982), "New concepts for concrete fatigue design procedures in Japan", IABSE Colloquium of Fatigue of Steel and Concrete Structures, Lausanne.
  7. Kato, B. (1979), "Mechanical properties of steel under load cycles idealizing seismic action", CEB Bull., 13(1), 7-27.
  8. Kim, T.H., Kim, B.S., Chung, Y.S. and Shin, H.M. (2006), "Seismic performance assessment of reinforced concrete bridge piers with lap splices", Eng. Struct., 28(6), 935-945. https://doi.org/10.1016/j.engstruct.2005.10.020
  9. Kim, T.H., Lee, K.M., Chung, Y.S. and Shin, H.M. (2005), "Seismic damage assessment of reinforced concrete bridge columns", Eng. Struct., 27(4), 576-592. https://doi.org/10.1016/j.engstruct.2004.11.016
  10. Kim, T.H., Lee, K.M. and Shin, H.M. (2002), "Nonlinear analysis of reinforced concrete shells using layered elements with drilling degree of freedom", ACI Struc. J., 99(4), 418-426.
  11. Kim, T.H., Lee, K.M., Yoon, C.Y. and Shin, H.M. (2003), "Inelastic behavior and ductility capacity of reinforced concrete bridge piers under earthquake: Theory and formulation", J. Struct. Eng-ASCE, 129(9), 1199-1207. https://doi.org/10.1061/(ASCE)0733-9445(2003)129:9(1199)
  12. Kim, T.H., Park, J.G., Kim, Y.J. and Shin, H.M. (2008), "A computational platform for seismic performance assessment of reinforced concrete bridge piers with unbonded reinforcing or prestressing bars", Comput. Concrete, 5(2), 135-154. https://doi.org/10.12989/cac.2008.5.2.135
  13. Kim, T.H. and Shin, H.M. (2001), "Analytical approach to evaluate the inelastic behaviors of reinforced concrete structures under seismic loads", J. Earthq. Eng. Soc. Korea, 5(2), 113-124.
  14. Li, B., Maekawa, K. and Okamura, H. (1989), "Contact density model for stress transfer across cracks in concrete", J. facult. Eng., Univ. Tokyo, 40(1), 9-52.
  15. Maekawa, K. and Okamura, H. (1983), "The deformational behavior and constitutive equation of concrete using elasto-plastic and fracture model", J. facult. Eng., Univ. Tokyo, 37(2), 253-328.
  16. Mander, J.B., Panthaki, F.D. and Kasalanati, K. (1994), "Low-cycle fatigue behavior of reinforcing steel", J. Mater. Civil Eng., 6(4), 453-468. https://doi.org/10.1061/(ASCE)0899-1561(1994)6:4(453)
  17. Miner, M.A. (1945), "Cumulative damage in fatigue", J. Appl. Mech., 67, 159-164.
  18. Rebora, B., Zimmermann, T. and Wolf, J.P. (1976), "Dynamic rupture analysis of reinforced concrete shells", Nucl. Eng. Des., 37, 269-297. https://doi.org/10.1016/0029-5493(76)90021-2
  19. Sandia National Laboratories (1999), Seismic Analysis of a Prestressed Concrete Containment Vessel Model, NUREG/CR-6639.
  20. Semblat, J.F., Aouameur, A. and Ulm, F.J. (2004), "Non linear seismic response of a low reinforced concrete structure : modeling by multilayered finite shell elements", Struct. Eng. Mech., 18(2), 211-229. https://doi.org/10.12989/sem.2004.18.2.211
  21. Shima, H., Chou, L. and Okamura, H. (1987), "Micro and macro models for bond behavior in reinforced concrete", J. Facult. Eng., Univ. Tokyo, 39(2), 133-194.
  22. Stangenberg, F. (1974), "Nonlinear dynamic analysis of reinforced concrete structures", Nucl. Eng. Des., 29, 71-88. https://doi.org/10.1016/0029-5493(74)90099-5
  23. Taylor, R.L. (2000), FEAP - A Finite Element Analysis Program (Version 7.2), Users manual, Vols. 1-2.

피인용 문헌

  1. Axisymmetric large deflection analysis of fully and partially loaded shallow spherical shells vol.47, pp.4, 2013, https://doi.org/10.12989/sem.2013.47.4.559
  2. An Experiment and Analysis of Precast Concrete Baseplate on Bimodal Tram Dedicated Bridge vol.15, pp.2, 2011, https://doi.org/10.11112/jksmi.2011.15.2.116
  3. Experimental Investigation into Mechanical Properties of Polypropylene Reactive Powder Concrete 2018, https://doi.org/10.14359/51701096